SAW Components SAW Rx 2in1 filter GSM 850 / GSM 900 Series/type: Ordering code: B9304 B39941B9304G110 Date: Version: April 24, 2006 2.0 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Application ■ Low-loss 2-in-1 RF filter for mobile telephone GSM850 and GSM900 bands, receive path (RX) ■ Impedance transformation from 50 Ω to 100 Ω for both filters Unbalanced to balanced operation for both filters Very low insertion attenuation Low amplitude ripple Usable passband: Filter 1 (GSM850): 25 MHz Filter 2 (GSM900): 35 MHz ■ Suitable for GPRS class 1 to 12 ■ ■ ■ ■ Features 0,65 0,325 1 0,50 2 3 4 10 5 9 8 7 0,27 0,26 0,26 bottom view 0,54 Package size 2.0 x1.6 x 0.68 mm3 Package code QCS10H RoHS compatible Approximate weight 0.008 g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) 0,075 ■ ■ ■ ■ ■ ■ ■ side view 6 0,075 1,6 2,0 Pin configuration ■ ■ ■ ■ ■ 1 4 6,7 8,9 2,3,5,10 9 1 Input [Filter 1] Input [Filter 2] Output, balanced [Filter 2] Output, balanced [Filter 1] To be grounded 8 7 6 4 2,3,5,10 Please read cautions and warnings and important notes at the end of this document. top view 2 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Characteristics of Filter 1 (GSM850) Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –10 ˚C to +85 ˚C ZS = 50 Ω ZL = 100 Ω min. Center frequency fC — typ. @ 25 ˚C 881.5 max. — 1.3 2.11) dB — MHz αmax Maximum insertion attenuation 869.0 ... 894.0 MHz Amplitude ripple (p-p) 869.0 ... 894.0 MHz — 0.7 1.4 ∆α dB Input VSWR 869.0 ... 894.0 MHz — 1.7 2.1 869.0 ... 894.0 MHz — 1.8 2.2 –1.0 –0.5/0.5 1.0 –5 –2.0/2.0 5 ˚ 20 20 20 20 27 25 40 33 — — — — dB dB dB dB 35 44 — dB 45 30 23 23 30 40 30 20 54 35 35 25 52 50 45 32 — — — — — — — — dB dB dB dB dB dB dB dB Output VSWR Output amplitude balance (|S31/S21|) 869.0 ... 894.0 MHz dB Output phase balance (φ(S31) – φ(S21)+180˚) 869.0 ... 894.0 MHz Common mode suppression 869.0 ... 894.0 824.0 ... 995.0 1648.0 ... 1990.0 3296.0 ... 3980.0 MHz MHz MHz MHz Inter band isolation 925.0 MHz Scs21 α ... 960.0 α Attenuation 0.3 480.0 824.0 914.0 1738.0 2400.0 2500.0 6000.0 1) 2) ... 480.0 ... 824.0 ... 849.0 ... 1738.0 ... 2400.0 ... 2500.0 ... 6000.0 ... 12750.02) MHz MHz MHz MHz MHz MHz MHz MHz 2.5 dB max at -30 ˚C ... -10 ˚C and 85 ˚C ... 95 ˚C values based on measurement data on PCB layout given in document “Test PWB and electrical verification methods”, dated 11.04.2005; they may vary with different PCB layout Please read cautions and warnings and important notes at the end of this document. 3 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage Input power at GSM850, GSM900 GSM1800, GSM1900 Tx bands 1) T Tstg VDC VESD PIN PIN –40/+85 –40/+85 5 1001) 15 15 ˚C ˚C V V machine model, 10 pulses dBm dBm peak power of GSM signal duty cycle 4:8 acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 4 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Transfer function Transfer function (wideband) Please read cautions and warnings and important notes at the end of this document. 5 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Smith charts S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 6 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Characteristics of Filter 2 (GSM900) Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –10 ˚C to +85 ˚C ZS = 50 Ω ZL = 100 Ω min. Center frequency fC max. — typ. @ 25 ˚C 942.5 — 1.8 2.61) dB dB — MHz αmax Maximum insertion attenuation 925.0 ... 960.0 MHz Amplitude ripple (p-p) 925.0 ... 960.0 MHz — 1.1 1.7 ∆α Input VSWR 925.0 ... 960.0 MHz — 1.9 2.3 925.0 ... 960.0 MHz — 2.0 2.4 –1.2 –0.7/0.7 1.2 –5 –2.0/2.0 5 ˚ 20 20 20 20 27 25 47 35 — — — — dB dB dB dB 35 40 — dB 45 30 23 18 23 30 25 40 30 20 54 33 32 20 30 47 45 45 40 26 — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB Output VSWR Output amplitude balance (|S31/S21|) 925.0 ... 960.0 MHz dB Output phase balance (φ(S31) – φ(S21)+180˚) 925.0 ... 960.0 MHz Common mode suppression 925.0 ... 960.0 824.0 ... 995.0 1648.0 ... 1990.0 3296.0 ... 3980.0 MHz MHz MHz MHz Inter band isolation 869.0 894.0 MHz ... 480.0 ... 880.0 ... 905.0 ... 915.0 ... 1850.0 ... 1920.0 ... 2400.0 ... 2500.0 ... 6000.0 ... 12750.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Scs21 α ... α Attenuation 0.3 480.0 880.0 905.0 980.0 1850.0 1920.0 2400.0 2500.0 6000.0 1) 3.3 dB max. at -30 ˚C ... -10 ˚C and 85 ˚C ... 95 ˚C Please read cautions and warnings and important notes at the end of this document. 7 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage Input power at GSM850, GSM900 GSM1800, GSM1900 Tx bands 1) T Tstg VDC VESD PIN PIN –40/+85 –40/+85 5 1001) 15 15 ˚C ˚C V V machine model, 10 pulses dBm dBm peak power of GSM signal duty cycle 4:8 acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 8 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Transfer function Transfer function (wideband) Please read cautions and warnings and important notes at the end of this document. 9 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet Smith charts S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 10 April 24, 2006 SAW Components B9304 SAW Rx 2in1 filter 881.5 & 942.5 MHz MHz Data sheet References Type B9304 Ordering code B39941B9304G110 Marking and package C61157-A7-A1 Packaging F61074-V8252-Z000 Date codes L_1126 B9304_LB_NB.s3p S-parameters B9304_LB_WB.s3p B9304_UB_NB.s3p B9304_UB_WB.s3p Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2006. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 11 April 24, 2006 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 12 April 24, 2006