Ohmite AP8363R3J 35 watts to-220 high power resistor Datasheet

AP836 35 Watts TO-220 High
Power Resistors
A high power TO-220 style resistor package designed for high frequency emitter
circuits in switching power supplies. Also used in voltage regulation and low energy
pulse loading.
• 35 Watts at 25˚C case temperature on heat sink
• Single screw mounting to heat sink
• Moulded case for proctection and easy to mount
• Non-inductive design
• Electrically isolated case
• RoHS Compliant
Characteristics
Power rating:
2.50 Watts in free air
Operating voltage:
350V max
Dielectric strength:
1800Vac
Insulation resistance:
10GΩ min
Working temperature:
-65ºC to 150ºC
Temperature coefficient:
As specified, referenced to 25˚C, ∆R taken at +105˚C
Short time overload:
∆R ±0.3%, 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous
operating voltage for 5 seconds
Load life:
∆R ±1.0%, 2000 hours at rated power
Damp heat with load:
∆R ±0.5%, 40 ±2˚C, 90 - 95% R.H max working voltage for 1000 hours with 1.5 hours “ON” and
0.5 hours “OFF”
Solderability:
90% min coverage, 245 ±5˚C for 3 seconds
Thermal shock:
∆R ±0.3%, -65˚C - 150˚C, 100 cycles
Terminal strength:
∆R ±0.2%, 2.4 N
Vibration and high frequency:
∆R ±0.2%, 20g peak
Electrical Specifications
Resistance
Value Range
Available Tolerance & Pref.
Available TCR
Value Ranges
R05 - 1R
J (±5%) K (±10%)
3R01 - 10R
10R2 - 10K
F (±1%) , J (±5%) ,
K (±10%)
D (±0.5%) F (±1%) J
(±5%) K (±10%)
100
Not specified
±300ppm/˚C
Power Rated %
1R02 - 3R
Derating Curve
±100ppm/˚C (std.)
±200ppm/˚C
±50ppm/˚C
±100ppm/˚C (std.)
±200ppm/˚C
80
60
40
20
0
0
25
Preferred value ranges:
F (±1%) - E96 , J (±5%) - E24, K (±10%) - E12
75
100
125
Case Temperature (°C)
For more information and ordering, please consult
www.arcolresistors.com
Page 1 of 2
50
2/13.18
150
175
AP836 35 Watts TO-220 High
Power Resistors
Standard part numbers
0.571 0.591"
(14.50
14.5015.00mm)
- 15.00
0.112 0.120"
0.159 0.190"
(4.06
4.064.82mm)
- 4.82
0.047 0.055"
(1.20
1.201.40mm)
- 1.40
0.23 0.25"
(5.85
5.856.35mm)
- 6.35
0.139 0.148"
(3.55
3.55-3.75mm)
3.95
0.39 0.41"
(9.91
9.9110.41mm)
- 10.41
(2.85 -3.05mm)
2.65
3.05
Dimensions (mm)
0.046 0.054"
(1.17
1.17 1.37mm)
- 1.37
AP83615RJ
AP83622RJ
AP83633RJ
AP83647RJ
AP83651RJ
AP83675RJ
AP836100RJ
AP836150RJ
AP836330RJ
AP836470RJ
AP8361KJ
AP8362K4J
AP8364K7J
AP83610KJ
0.022 0.028"
(0.55
0.400.70mm)
- 0.70
0.080 0.089"
(2.05
2.052.52mm)
- 2.52
0.500 0.597"
(12.70
12.7014.70mm)
- 14.70
0.157" Max
(4.00mm)
4.00
max
0.19 0.21"
(4.83
4.835.33mm)
- 5.33
0.027 0.034"
(0.70
0.70 0.86mm)
- 0.86
AP8361RJ
AP8362R2J
AP8363R3J
AP8364R7J
AP8365R6J
AP8367R5J
AP83610RJ
ARCOL UK Limited,
The information contained herein does not form part of a
Threemilestone Ind. Estate,
contract and is subject to change without notice. ARCOL
Truro, Cornwall, TR4 9LG, UK.
operate a policy of continual product development, therefore,
T +44 (0) 1872 277431
specifications may change.
F +44 (0) 1872 222002
E [email protected]
www.arcolresistors.com
It is the responsibility of the customer to ensure that the
component selected from our range is suitable for the intended
application. If in doubt please ask ARCOL.
Page 2 of 2
2/13.18
Similar pages