Aimtron AT1201-27XR 2.5/2.7/2.8/3.0/3.3/4.5/5.0v 150ma ldo Datasheet

AT1201
Preliminary Product Information
2.5/2.7/2.8/3.0/3.3/4.5/5.0V 150mA LDO
Features
General Description
• Output voltage
2.5/2.7/2.8/3.0/3.3/4.5/5.0V
• Output current
150mA
• Output noise voltage 35μVrmstyp.
• No-load input current 90μA typ.
• I/O voltage difference 0.1V typ.(Io=50mA)
• Ripple rejection ratio 70dB typ.
• Bulit-in On/Off control
The AT1201 is a low-noise, low-dropout,
low-quiescent-current linear regulator designed for
battery-powered applications. The output voltage
precision is within ±2﹪and output currents of up
to 150mA;the input/output voltage difference at
50mA is only 0.1V.
Applications
• Cordless phones
• Portable phones, PHS
• Other battery operating system
Block Diagram
Aimtron reserves the right without notice to change this circuitry and specifications.
7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
Fax: 886-3-563-0879
WWW: http://www.aimtron.com.tw
2/9/2006 REV:1.1
Email: [email protected]
1
AT1201
Preliminary Product Information
2.5/2.7/2.8/3.0/3.3/4.5/5.0V 150mA LDO
Pin Assignment
Ordering Information
Part number
AT1201-□□X
AT1201-□□X_Green
Package
SOT-25
SOT-25, Green
AT1201-□□XR
AT1201-□□XR_Green
SOT-25
SOT-25, Green
Marking
Date Code
,Date Code with one bottom line
Date Code
,Date Code with one bottom line
□□:Output Voltage 25::2.5V 27::2.7V 28:2.8V 30:3.0V 33:3.3V 45::4.5V
50:5.0V
■: A:5V B:3.3V C:3.0V D:2.8V E:2.7V F:4.5V G:2.5V
: Date Code
*For more marking information, contact our sales representative directly
Absolute Maximum Ratings
Item
Symbol
Ratings
Units
Storage temperature
Operating temperature
Power supply voltage
Output current
Power consumption
TSTG
TOPR
VCC
IOUT
Pd
-40〜+125
-30〜+85
-0.3〜+14
200
150
℃
℃
V
mA
mW
Item
Symbol
Ratings
Units
Operating temperature
Output current
Operating voltage
TOP
IOP
VOP
-20〜+75
0〜150
3.4〜10
℃
mA
V
Recommended Operating Condition
7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
Fax: 886-3-563-0879
WWW: http://www.aimtron.com.tw
2/9/2006 REV:1.1
Email: [email protected]
2
AT1201
Preliminary Product Information
2.5/2.7/2.8/3.0/3.3/4.5/5.0V 150mA LDO
Electrical Characteristics (Except where noted otherwise, Ta=25℃)
Item
Output voltage
Symbol
VO
Measurement conditions
Min.
VIN=VO+1V, IO=30mA
VOUT
-2﹪
No-load consumption current
Iccq1
VIN=VO+1V, IO=0mA
Input current while off
Iccq2
VIN=VO+1V, VCONT=0V
I/O voltage difference
Vd min
VIN=VO-0.2V, IO=50mA
ΔV1
Input fluctuations
VIN=VO+1V~10V, IO=50mA
ΔV2
Load fluctuation
VIN=VO+1V, IO=0~100mA
Tj=-20~+75℃,VIN= VO+1V,
Output voltage temperature
ΔVO/ΔT
coefficient
IO=30mA
VIN=VO+1V, IO=30mA,
50
Ripple rejection rate
RR
VRIPPLE=1VP-P,f=120Hz
VIN=VO+1V, f=20~80kHz,
Output noise voltage
Vn
IO=30mA, Cn=0.01μF
CONT pin current while on
ICONT
VCONT=1.6V
Typ.
Max.
Units
VOUT
VOUT
+2﹪
V
180
0.1
0.2
20
60
μA
μA
V
mV
mV
90
0.1
10
30
100
ppm/℃
70
dB
35
(3V item)
μVrms
5
15
μA
V
V
CONT pin high level
H
1.6
VIN
+0.3V
CONT pin low level
L
-0.3
0.4
Measuring Circuit
7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
Fax: 886-3-563-0879
WWW: http://www.aimtron.com.tw
2/9/2006 REV:1.1
Email: [email protected]
3
AT1201
Preliminary Product Information
2.5/2.7/2.8/3.0/3.3/4.5/5.0V 150mA LDO
Characteristics (33X,33XR Series )
•Consumption current (VIN=4.3V)
•I/O voltage difference (VIN=3.1V)
•Current limit (VIN=4.3V)
•Output fluctuation (IO=30mA)
•Load fluctuation (VIN=4.3V)
•No-load input current
7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
Fax: 886-3-563-0879
WWW: http://www.aimtron.com.tw
2/9/2006 REV:1.1
Email: [email protected]
4
AT1201
Preliminary Product Information
2.5/2.7/2.8/3.0/3.3/4.5/5.0V 150mA LDO
•Load step (1mA-200mA)
•Chip enable transient response
•Current limit response
7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
Fax: 886-3-563-0879
WWW: http://www.aimtron.com.tw
2/9/2006 REV:1.1
Email: [email protected]
5
AT1201
Preliminary Product Information
2.5/2.7/2.8/3.0/3.3/4.5/5.0V 150mA LDO
Small Outline SOT-25
SYMBOL
A
A1
A2
b
C
D
E
E1
L
e
e1
r
INCHES
MIN
0.035
0.000
0.035
0.010
0.003
0.110
0.102
0.059
0.014
00
MAX
0.057
0.006
0.051
0.020
0.008
0.122
0.118
0.069
0.022
0.037ref
0.075ref
100
MILLIMETERS
MIN
MAX
0.90
1.45
0.00
0.15
0.90
1.30
0.25
0.50
0.08
0.20
2.80
3.10
2.60
3.00
1.50
1.75
0.35
0.55
0.95ref
1.90ref
00
100
NOTES
-
-
7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
Fax: 886-3-563-0879
WWW: http://www.aimtron.com.tw
2/9/2006 REV:1.1
Email: [email protected]
6
AT1201
Preliminary Product Information
2.5/2.7/2.8/3.0/3.3/4.5/5.0V 150mA LDO
Reflow Profiles
Profile Feature
Sn-Pb Eutectic Assembly
Large Body
Small Body
Pkg. thickness
Pkg. thickness
<2.5mm or Pkg.
≥2.5mm or Pkg.
3
volume ≥350mm3 volume <350mm
Average ramp-up rate
(TL to TP)
Preheat
-Temperature Min(Tsmin)
-Temperature Max (Tsmax)
-Time (min to max)(ts)
Tsmax to TL
-Ramp-up Rate
Time maintained above:
-Temperature (TL)
-Time (tL)
Peak Temperature(TP)
Time within 5°C of actual Peak
Temperature (tP)
Ramp-down Rate
Time
25°C
to
Peak
Temperature
3°C/second max.
Pb-Free Assembly
Large Body
Small Body
Pkg. thickness
Pkg. thickness
≥2.5mm or Pkg.
≥2.5mm or Pkg.
volume ≥350mm3 volume ≥350mm3
3°C/second max.
100°C
150°C
60-120 seconds
150°C
200°C
60-180 seconds
3°C/second max.
183°C
60-150 seconds
217°C
60-150 seconds
225+0/-5°C
10-30 seconds
240+0/-5°C
10-30 seconds
6°C/second max.
6 minutes max.
245+0/-5°C
10-30 seconds
250+0/-5°C
20-40 seconds
3°C/second max.
8 minutes max.
*All temperatures refer to topside of the package, measured on the package body surface.
7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
Fax: 886-3-563-0879
WWW: http://www.aimtron.com.tw
2/9/2006 REV:1.1
Email: [email protected]
7
Similar pages