CVHD-575 Model 5×7.5 mm SMD, 3.3V, HCMOS CVHD-575-22.579200 5 -9 dB Hz c/ @ Hz 10 65 -1 H c/ B d z o Fl or CVHD-575-40.000 1 -9 H c/ B d z @ Hz 10 65 -1 H c/ B d z o Fl or Model CVHD-575 is the industry’s lowest phase noise VCXO in a 5×7.5 mm package. Close-in phase noise is -90 dBc/Hz @ 10 Hz while its floor is at -165 dBc/Hz. This oscillator may be small in size but it packs a punch inside. Its output driver is capable of driving ±24mA. Applications include Digital Video, DACs, ADCs for HD Audio, Low Phase Signal Sources, Test and Measurement CRYSTEK CORPORATION Rev: B Date: 23-Sep-2015 Page 1 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CVHD-575 Model 5×7.5 mm SMD, 3.3V, HCMOS Frequency Range: 20 MHz to 52 MHz* Temperature Range: (Option M) (Option X) Storage: Input Voltage: Input Current: Output: Symmetry: Rise/Fall Time: Logic: 0°C to +70°C (standard) -20°C to +70°C -40°C to +85°C -45°C to 90°C 3.3V ±0.3V 15mA Typical, 25mA Max HCMOS 45/55% Max @ zero crossing point 2nsec Max @ 20% to 80% Vdd “0” = 10% Vdd Max “1” = 90% Vdd Min 15pF ±24mA Max Load: Output Current: Input: Modulation Bandwidth: >10kHz @ -3dB Input Impedance: 51 kΩ Control Voltage: 1.65V ±1.65V Tuning Sensitivity: +22ppm/V Typical Frequency Pulling: ±20ppm APR Min (Inclusive of frequency stability, calibration, and aging.) Linearity: ±10% Max Phase Jitter: (12kHz~20MHz) 125fs Typical @ 40 MHz Phase Noise Typical: See plot Phase Noise Floor: -165 dBc/Hz Typical, -162 dBc/Hz Max Sub-harmonics: None Aging: <3ppm 1st year, <1ppm thereafter Part Number Example: CVHD-575X-50.000 = 3.3V, 45/55, -40°C to +85°C, 50 MHz TEMPERATURE Critical Temperature Zone Ramp-Down 6°C/Sec. 260°C 22.579200 24.576 27.000 40.000 45.158400 49.152 50.000 Absolute Maximum Ratings Parameter Rating Unit Input Supply Voltage +6.0 V Input Control Voltage +10.0 V 0.295 -0.008 +0.035 (7.50 -0.20 +0.89) RECOMMENDED REFLOW SOLDERING PROFILE Ramp-Up 3°C/Sec Max. *Standard Frequencies (MHz) Part Number Frequency Date Code 217°C 200°C 0.200 ±0.015 (5.08 ±0.38) 0.099 (2.50) 150°C SUGGESTED PAD LAYOUT via to ground Denotes pad 1 Preheat 180 Secs. Max. 8 Minutes Max. 0.050 (1.27) 90 Secs. Max. 0.01µF 0.046 (1.16) 4 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. 0.058 (1.47) Pad Connection 1 2 3 4 Vc GND Output Vdd CRYSTEK CORPORATION #1 #2 #4 #3 0.046 (1.16) 3 0.154 (3.91) 0.071 (1.80) 1 2 0.200 (5.08) 0.200 (5.08) Rev: B Date: 23-Sep-2015 Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com