EPCOS B25750H2228K004 Power capacitor Datasheet

Product Brief 2011
Power Capacitors
MKK-DC / MKK-DCI (-H) / MKK-DC-R
Characteristics and
properties
High performance gas-impregnated capacitors offered for
applications with medium voltage from 1500 to 3000 V DC
and medium currents, with
clear advantages in terms of
lightness and reduced cost.
Oil-impregnated capacitors are
alternatives when applications
demand high operating temperature and currents, resulting
in critical heating that is more
effectively evacuated by oil.
This technology in oil is also
more suitable for applications
with high nominal voltages of
>1800 V DC and/or high ripple
voltages above 400 V RMS.
Polyurethane resin-filled capacitors are offered in low voltage
www.epcos.com
applications with high currents
due to their more simple construction with less components. The resin acts as insulator and heat conductor.
In those cases where due to
constraints in the application,
the design of choice as explained above is not advisable
or appropriate, a special
custom-made design with
another technology is possible.
Applications
• DC-voltage applications for
DC link
• Resonant filtering
• Frequency converters
Housing
• Rectangular non-magnetic
stainless steel case
• Ferric steel, aluminum
Power Capacitors
Overview
MKK-DC
B25650
MKK-DCI / MKK-DCI-H
B25750
MKK-DC-R
B25640
• Dry (gas)
• Oil
• Dry
• SF6, N2
• Rapeseed oil
• Polyurethane resin
• Flat winding
• Flat winding
• Flat winding
• < 3000 V DC
• 1800 … 6500 V DC
• 800 … 1500 V DC
• No AC ripple
• With AC ripple
• No AC ripple
• Low temperature
• Better thermal stability
• Low temperature
• DC link traction
• Filter circuit
• DC link industrial
Applications
• State-of-the-art
• Best cost
Specification and electrical characteristics
Capacitance
100 … 20 000 μF
Tolerance
± 10%
Rated voltage
800 … 6500 V DC
Operating hot-spot temperature
–55 … +85 °C
Lifetime at VR and +70 °C hot-spot temperature
Up to 350 000 h
Stray inductance
Minimum values of down to 30 nH
Impregnation
Resin, gas and oil available
Test voltage between terminals
1.5 • VR during 10 s
Test voltage between shorten-terminals and case
(2 • VR + 1000) VRMS at 50 Hz during 60 s
© EPCOS AG 2011
Power Capacitors
MKK-DC/MKK-DCI/MKK-DCI-H:
Mechanical considerations and construction
General description
The MKK-DC/MKK-DCI/MKK-DCI-H capacitors are
designed in rectangular cases made of austenitic
stainless steel. The cases are hermetically welded
and the surface is not painted. Fixing brackets and
bolts are mounted to fix the capacitor. Bolts are used
also for the ground connection.
Different types of terminals are available for the
terminal connections.
The capacitors should be exclusively handled by the
fixing brackets. In no case the terminals should be
used to lift the capacitor.
Capacitors will usually be mounted upright (terminals
on top), but can be mounted in any position keeping
a distance of 25 mm minimum between large facets,
to allow for thermal expansion and effective cooling.
Dimensions
The following table shows the available standard
dimensions. Deviations from these dimensions are
available upon request.
Tolerances are indicated in the drawings as well as the
maximum thermal expansions during normal operation
conditions.
The label is located centered to the length and 50 mm
from the top of the case.
Labeling: manufacturer (company logo), ordering code,
connection diagram, version, rated capacitance,
tolerance, weight, insulating voltage, IEC standard,
country of origin, month/year of manufacturing.
MKK-DC
MKK-DCI
MKK-DCI-H
H1
mm
340
340
340
H2
mm
605
605
605
H3
mm
805
Standard design
Terminals and connections
Standard terminals are available as shown below.
Brass bolts, tinned, with different metrics in male and
possibility of female connection, are available upon
request.
Insulation material of the terminal is Epoxy according to
CTI 600.
The following table shows the maximum continuous
currents acceptable (for a temperature increase in the
terminals of +15 °C), the maximum torque and the
contact surface of standard terminals.
Other specific options are available upon request.
Please contact our local sales office.
Terminal M16
Max. current
Max. torque
Contact surface
© EPCOS AG 2011
265 A
25 Nm
505 mm2
Power Capacitors
Standard terminals
Fixing brackets
The standard fixing brackets of the cases are shown
in the drawing below. For heights lower than 500 mm,
the lower brackets are removed.
Upon request it is possible to substitute the fixing
brackets by bolts (only for heights lower than 500
mm).
Other specific options are available upon request.
Please contact our local sales office.
© EPCOS AG 2011
Z connection can be offered.
It is supplied unmounted.
Power Capacitors
MKK-DC-R:
Mechanical considerations and construction
General description
The MKK-DC-R capacitors are designed in aluminum
rectangular cases filled with resin.
Fixing brackets are available as shown below. For any
other options, please contact our local sales office.
The standard connection terminals are shown in the
drawing below. Otherwise brass bolts tinned with
male and possibility of female connection are
available upon request.
The capacitors should be exclusively handled by
fixing brackets. In no case, the terminals should be
used to lift the capacitor.
Capacitors will usually be mounted upright (terminals
on top), but can be mounted in any position keeping
a lateral space of 25 mm minimum.
© EPCOS AG 2011
Dimensions
The table below shows the L dimension options and
their relation to maximum current and number of
terminal recommendable for low inductance option
(inductance < 50 nH). Other dimensions are available
on request.
Tolerances are indicated in the drawing.
Position of terminals (dimensions A and B) are
changeable according to custom needs.
MKK-DC-R
Inductance < 50 nH
L1
L2
L3
L1
mm
340
L2
mm
510
Number of
terminals
6
8
10
L3
mm
750
Ieff (max)
A
210
270
350
Power Capacitors
Technical data example: B25650D1528K004
Technical data
Characteristics
CR
Tolerance
VR
Vi
WN
Ieff, max
Ieff, permanent
LR
tanδο
ESR
Climatic category (DIN IEC 68 part 1 and 2)
5200
±10
1800
1300
8420
300
216
49
2
0.5
μF
%
V DC
V AC
Ws
A
A
nH
10-4
2200
V
2700
36
312
7
60
V
kA
kA
mΩ
Maximum ratings
^
V
VR
Î
Îs
dv/dtmax
dv/dts
Test data
2700
VTT DC
3600
VTT AC
≥ 2.78
Ris XC
≤ 17
tanδ (120 Hz)
Climatic conditions
Tmin
Tamb,max
THotspot,max
Humidity
(av. rel.)
Failure rate
Estimated
lifetime
Tstorage
© EPCOS AG 2011
Technical data
V/μs
V/μs
V@10 s
V@ 50 Hz, 60 s
h
10-4
–50
+60
+85
< 95
°C
°C
°C
%
300
100 000
fit
h
–50 … +85
°C
Vtest
Rel. humidity
ttest
ΔC/C
Δtanδ
Ris XC
Design data
+40
93
56
≤1
≤1
10000
°C
%
days
%
10-4
s
Dimensions
Lcase
Bcase
Hcase
Aterminal
Terminations
Max. torque
Weight (approx.)
Case extension 1)
Impregnation
Fixing elements
340
162
605
80
M12 x 30
20
40
8
gas filled
acc. spec.
Remarks
Project study
Overpressure switch recommended
1) with normal conditions
mm
mm
mm
mm
mm
Nm
kg
mm
Power Capacitors
Ordering code system
MKK-DC series, all types with 4 terminals
CR
VR
Ieff
Vs
@100Hz
μF
V
A
V
8200
900
240
1350
6000
1100
230
1650
2600
1800
175
2700
900
3000
150
4500
630
3600
130
5400
510
4000
120
6000
195
6000
75
9000
dv/dt s
ESR
Zth
Ls
V/us
30
40
60
220
260
290
750
mW
0.5
0.6
0.8
0.9
1.1
1.3
2.4
°C/W
0.7
0.7
0.9
0.9
1.0
1.0
1.0
nH
< 50
< 50
< 50
< 50
< 50
< 50
< 50
dv/dt s
ESR
Zth
Ls
V/us
30
40
60
220
260
290
750
mW
°C/W
0.3
0.3
0.4
0.5
0.5
0.5
0.7
nH
< 80
< 80
< 80
< 80
< 80
< 80
< 80
Ordering code
B25650C9828K004
B25650D1608K024
B25650D1268K004
B25650D3907K004
B25650D3637K004
B25650D4517K004
B25650D6197K004
Dimensions L x W x H: 340 x 165 x 340 mm, weight 24 kg
CR
μF
16400
12000
5200
1800
1250
1000
390
VR
V
900
1100
1800
3000
3600
4000
6000
Ieff
@100Hz
A
370
360
300
275
240
220
145
Vs
V
1350
1650
2700
4500
5400
6000
9000
Dimensions L x W x H: 340 x 165 x 605 mm, weight 40 kg
*) see technical data on page 6
© EPCOS AG 2011
0.4
0.4
0.5
0.6
0.7
0.8
1.3
Ordering code
B25650C9169K034
B25650D1129K004
B25650D1528K004*
B25650D3188K024
B25650D3128K004
B25650D4108K004
B25650D6397K004
Power Capacitors
CR
VR
μF
2500
1700
1400
V
3000
3600
4000
Ieff
@100Hz
A
340
300
290
dv/dt s
ESR
Zth
Ls
V/us
220
260
290
mW
0.5
0.6
0.7
°C/W
0.3
0.3
0.3
nH
< 100
< 100
< 100
dv/dt s
ESR
Zth
Ls
V/us
90
100
104
mW
1.3
1.5
1.6
°C/W
0.4
0.4
0.4
dv/dt s
ESR
Zth
V/us
90
100
104
mW
0.6
0.6
0.6
°C/W
0.3
0.3
0.3
dv/dt s
ESR
Zth
V/us
50
60
65
80
230
280
340
mW
0.7
0.7
0.7
0.9
0.7
0.9
1.2
°C/W
0.4
0.4
0.4
0.4
0.4
0.4
0.4
dv/dt s
ESR
Zth
V/us
55
60
65
80
mW
°C/W
0.3
0.3
0.3
0.3
Vs
V
4500
5400
6000
Ordering code
B25650D3258K024
B25650D3178K004
B25650D4148K004
Dimensions L x W x H: 340 x 165 x 805 mm, weight 52 kg
MKK-DCI series, all types with 4 terminals
CR
VR
μF
760
610
565
V
3500
3900
4100
Ieff
@100Hz
A
170
160
160
Vs
V
5250
5850
6150
nH
< 50
< 50
< 50
Ordering code
B25750D3767K004
B25750D3617K004
B25750D4567K004
Dimensions L x W x H: 340 x 165 x 340 mm, weight 26 kg
CR
VR
μF
1500
1200
1100
V
3500
3900
4100
Ieff
@100Hz
A
300
290
290
Vs
V
5250
5850
6150
Ls
nH
< 80
< 80
< 80
Ordering code
B25750D3158K004
B25750D3128K004
B25750D4118K004
Dimensions L x W x H: 340 x 165 x 605 mm, weight 44 kg
MKK-DCI-H series, all types with 4 terminals
CR
VR
μF
3400
2700
2200
1500
800
500
350
V
1800
2000
2200
2700
3600
4400
5400
Ieff
@100Hz
A
230
220
210
190
220
180
160
Vs
V
2700
3000
3300
4000
5400
6600
8000
Ls
nH
< 50
< 50
< 50
< 50
< 50
< 50
< 50
Ordering code
B25750H1348K004
B25750H2278K004
B25750H2228K004
B25750H2158K004
B25750H3807K004
B25750H4507K004
B25750H5357K004
Dimensions L x W x H: 340 x 165 x 340 mm, weight 30 kg
CR
VR
μF
6900
5400
4400
3000
V
1800
2000
2200
2700
Ieff
@100Hz
A
370
360
350
320
Vs
V
2700
3000
3300
4000
Dimensions L x W x H: 340 x 165 x 605 mm, weight 50 kg
© EPCOS AG 2011
0.5
0.5
0.5
0.6
Ls
nH
< 80
< 80
< 80
< 80
Ordering code
B25750H1698K004
B25750H2548K004
B25750H2448K004
B25750H2308K004
Power Capacitors
MKK-DC-R series (terminal construction see page 5)
CR
VR
μF
5400
4300
3600
3100
2600
V
800
900
1000
1100
1200
Ieff
@100Hz
A
210
200
190
190
180
Vs
V
1200
1350
1500
1650
1800
dv/dt s
ESR
Zth
V/us
30
35
40
40
45
mW
0.7
0.8
0.8
0.8
0.9
°C/W
0.6
0.6
0.6
0.6
0.6
dv/dt s
ESR
Zth
V/us
30
35
40
40
45
mW
0.5
0.6
0.6
0.6
0.6
°C/W
0.5
0.5
0.5
0.5
0.5
dv/dt s
ESR
Zth
V/us
30
35
40
40
45
mW
°C/W
0.4
0.4
0.4
0.4
0.4
Ls
nH
< 50
< 50
< 50
< 50
< 50
Ordering code
B25640D8548K000
B25640D9438K000
B25640D1368K000
B25640D1318K000
B25640D1268K000
Dimensions L x W x H: 340 x 170 x 200 mm, weight 18 kg
CR
VR
μF
8300
6700
5500
4800
4100
V
800
900
1000
1100
1200
Ieff
@100Hz
A
270
260
260
250
240
Vs
V
1200
1350
1500
1650
1800
Ls
nH
< 50
< 50
< 50
< 50
< 50
Ordering code
B25640D8838K000
B25640D9678K000
B25640D1558K000
B25640D1488K000
B25640D1418K000
Dimensions L x W x H: 510 x 170 x 200 mm, weight 26 kg
CR
μF
12500
10100
8300
7300
6200
VR
V
800
900
1000
1100
1200
Ieff
@100Hz
A
350
350
340
340
330
Vs
V
1200
1350
1500
1650
1800
0.5
0.5
0.5
0.5
0.5
Ls
nH
< 50
< 50
< 50
< 50
< 50
Ordering code
B25640D8129K000
B25640D9109K000
B25640D1838K000
B25640D1738K000
B25640D1628K000
Dimensions L x W x H: 750 x 170 x 200 mm, weight 32 kg
Lifetime
The end of life criterion is a capacitance loss higher than 3% compared to initial value.
Capacitor
Lifetime
Hotspot temperature
MKK-DC
100 000 h
+70 °C
MKK-DC-R
MKK-DCI
150 000 h
+75 °C
MKK-DCI-H
Important information: Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our
knowledge of typical requirements that are often placed on our products. We expressly point out that these statements cannot be regarded as binding statements about the suitability of
our products for a particular customer application. It is incumbent on the customer to check and decide whether a product is suitable for use in a particular application. This publication is
only a brief product survey which may be changed from time to time. Our products are described in detail in our data sheets. The Important notes (www.epcos.com/ImportantNotes) and
the product-specific Cautions and warnings must be observed. All relevant information is available through our sales offices.
© EPCOS AG • A Group Company of TDK-EPC Corporation
Edition 2011
Similar pages