Plastic Film Capacitors Metallized Polypropylene Film Capacitors Type:MKP for DC-link EZPE 800VDC Series Non-inductive construction using metalized polypropylene film with flame retardant epoxy resin and case. Features High safety, Self-healing and Self-protecting function built-in Long product life, High reliability Low loss, Low ESR Flame retardant (Case and sealing resin) RoHS directive compliant Recommended Applications For DC filtering, DC link circuit Solar inverters Wind power generation Industrial power supplies Resonance circuit for power supply Inverter circuit in appliances (Air Conditioners etc.) Construction Dielectric Electrodes Plastic case Sealing Terminals : Polypropylene film : Metallized dielectric with segmented pattern : UL94 V-0 : UL94 V-0 : Tinned wires,2-pin and 4-pin versions Explanation of Part Numbers 1 2 3 4 E Z P E Product code 5 Dielectric & construction 6 7 8 Rated voltage 80 Capacitance 800 VDC 9 10 11 12 T A Pin type Suffix Suffix L 2-pin type M 4-pin type Specifications Category temperature range ( TC ) Rated voltage (VR) ( *1 ) ( *2 ) 40 to + 85 800 VDC ( 700 VDC at 85 ; Derating of rated voltage at more than 70 Rated capacitance ( CR ) 10 F to 60 F Capacitance tolerance ± 10 % Withstanding DC voltage Between terminals : Rated voltage (VDC) × 150 % 10 s Terminal to case : 2110 VAC ( 50 Hz or 60 Hz ) 10 s Insulation resistance ( CR ) CR 10,000 F ( 20 , 500 VDC, 60 s ) *1 : The temperature of capacitor surface (case) *2 : Use for DC voltage only *3 : Refer to the page of “ DC voltage derating ” Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. (*3) ) Dimensions in mm (not to scale) Plastic Film Capacitors (a) (b) (a) (b) (c) (c) Rated voltage Capacitance Lot No. Rating, Dimensions & Quantity / Ammo Box Type EZPE Rated voltage : 800 VDC at 70 ( 700VDC at 85 Dimensions [mm] Part Number CR [ F] W H L P1 ) Permissible current P2 dv/dt [V/ s] Peak Current [Ao-p] RMS Current [Arms] ESRtyp [m ] tan ( *3 ) [%] ( *4 ) Mass [g] MOQ [pcs] 7.0 15.8 0.22 44 600 ( *1 ) ( *5 ) ( *2 ) EZPE80106LTA 10 20 42 41.5 37.5 - 1.2 22 220 EZPE80156MTA 15 20 42 41.5 37.5 10.2 1.2 22 330 9.0 10.5 0.22 43 600 EZPE80206MTA 20 30 51 41.5 37.5 10.2 1.2 22 440 11.0 7.7 0.22 82 400 EZPE80256MTA 25 30 51 41.5 37.5 10.2 1.2 22 550 13.0 6.4 0.22 80 400 EZPE80306MTA 30 30 51 41.5 37.5 20.3 1.2 22 660 15.0 5.3 0.22 78 400 EZPE80356MTA 35 30 51 57.5 52.5 10.2 1.2 15 525 12.0 9.7 0.33 110 200 EZPE80406MTA 40 30 51 57.5 52.5 20.3 1.2 15 600 13.0 8.3 0.33 107 200 EZPE80456MTA 45 30 51 57.5 52.5 20.3 1.2 15 675 14.0 7.0 0.33 104 200 EZPE80506MTA 50 35 56 57.5 52.5 20.3 1.2 15 750 15.0 6.3 0.33 140 200 EZPE80556MTA 55 35 56 57.5 52.5 20.3 1.2 15 825 16.0 5.9 0.33 138 200 EZPE80606MTA 60 35 56 57.5 52.5 20.3 1.2 15 900 17.0 5.6 0.33 136 200 *1 : When rising temperature of capacitor surface by continuous peak current (included pulse current), use within limit specified for temperature of capacitor surface and self heating temperature rise. , 10 kHz *2 : Maximum RMS current @ 70 Use within limit for self heating temperature rise at capacitor surface. *3 : Typical values @ 20 , 10 kHz ESR : less than 2.5 × ESRtyp *4 : Maximum dissipation factor @20 , 1 kHz *5 : Minimum order quantity consists of 4 packing units. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Permissible Conditions Plastic Film Capacitors Permissible Voltage These capacitors are designed only for DC voltage, so should not be used for AC line. Use the peak voltage (Vo-p) within the rated voltage. Use the peak to peak voltage (Vp-p) within 0.2 x VR . VR Vo-p = Vp+ Vp-p = 0.2 × VR Vp- DC Voltage, Peak current and RMS current derating Derating of voltage (Vo-p), RMS current (Arms), and peak current (Ao-p) according to the following diagram when the temperature of the capacitor surface exceeds 70 . Permissible voltage (Vo-p) Percentage to the permissible current (%) DC Voltage derating Current derating ! Temperature of capacitor surface TC ( ) #" $ $" " % %"& Temperature of capacitor surface TC ( ) Total cycles applied peak current Permissible self heating temperature rise is within following diagram when the temperature of the capacitor surface exceeds 70 . Total cycles applied peak current (Ao-p) (including pulse current) are within following diagram. 3!/ :; 3. Permissible self temp. rise 9 2 1 0 / . 1. 14 5. 54 2. 24 6. 64738.. Temperature of capacitor surface TC ( ) Percentage to the permissible peak current (%) Permissible self heating temperature rise -'#'#( ,'#( +'#( *#'#( )'#( '#( -' -'#' -!'#'' -!'#''#' Total cycles Please consult Panasonic if your condition exceeds the above spec. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. -!''#'#'#' Characteristics Reference = < Plastic Film Capacitors Temperature Characteristics at 1kHz ?BA Capacitance Dissipation factor (typical curve) (typical curve) at 1kHz P!O N N#O X N#O W N#O V tan (%) C/C (%) C A M N#O U N#O T N#O S N#O R >C N#O Q 60uF 45uF 30uF N#O P >@?BA >D!AE>FAE>G!A&A 10uF N#O N G!AHFA&D!AJI!AK? AAL?8G!A Y UN Y SN Y QNZN Temperature ( ) Temperature ( ) Insulation resistance at 500VDC ]^ _`ba@i QNZSN&UNZWN[P8NN\PQN (typical curve) ]^ _`babh F) ]^ _`babg C R( p p ]^ _`ba#f ]^ _`babe ]^ _`babd ]^ _`bac] ]^ _`ba#a j ha j f#a j daka dalf#aZhaZman]!abao]d#a Temperature ( ) Frequency Characteristics Lifetime expectancy Impedance vs. Frequency Lifetime expectancy (typical curve) s8qq #}#} #}#} Impedance ( ) tuvw s yzvw Permissible voltage (Vo-p) xuvw s8q { uvw qr s qr q@s qr qq@s s bB 8 B 8¡ ¢¡ £ ¤ ¥¤¤ 8 s8q s8qq Frequency (kHz) s8qqq s8qqqq bB!B8 }#} bBB #}#} #}#} @B B ! 8 ~ }#} |#}#} }#}#} }#}b}#} }#}#}b}#} }#}#}b}#}#} Lifetime expectancy (h) * Life time : reach ¦ C/C = - 10 % , Judgement of Panasonic Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.