CPC1019N 4-Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Load Current, Peak AC Rating 60 750 1 Units VP mA Max On-resistance LED Current to operate 0.6 2 Ω Description CPC1019N is a miniature, low-voltage, low on-resistance, 1-Form-A solid state relay in a small, 4-Pin SOP package. A Embodying Clare's patented OptoMOS technology, the CPC1019N comprises a highly efficient GaAlAs infrared LED that is optically coupled to efficient MOSFET output switches to provide 1500Vrms of input-to-output isolation. mA Features • • • • • • • • • • • • Low On-Resistance Low Drive Current High Load Current 100% Solid State Compact 4-Pin SOP Package TTL/CMOS Compatible input Arc-Free With No Snubbing Circuits 1500Vrms Input/Output Isolation No EMI/RFI Generation Immune to radiated EM fields SMD Pick & Place, Wave Solderable Tape & Reel Version Available Clare’s state of the art double-molded vertical construction packaging produces a very compact solid state relay that is ideal for replacing larger, less-reliable reed and electromechanical relays. Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant Ordering Information Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Utility Meters (gas, oil, electric and water) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls • ATE Part # CPC1019N CPC1019NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control - Control 1 4 3 2 Load Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF Pb RoHS 2002/95/EC DS-CPC1019N-R01 e3 tON www.clare.com 1 CPC1019N Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous Continuous, AC Peak Peak On-Resistance 1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 2 Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Capacitance Input to Output 1 2 2 Conditions Symbol Min Typ Max Units IF=2mA IL 0.35 - 750 1 3 0.6 1 mADC ILPK RON ILEAK - t < 10ms IL=750mA VL=60V 50V; f=1MHz tON tOFF COUT - 0.4 0.4 60 3 3 - ms ms pF IL=750mA IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.15 0.14 1.2 - 2 1.4 10 mA mA V μA - CI/O - 1 - pF IF=5mA, VL=10V A Ω μA Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 4mA is recommended. www.clare.com R01 CPC1019N PERFORMANCE DATA* LED Forward Voltage Distribution (N=50, TA=25ºC, IF=5mA) 10 5 Device Count (N) 15 15 10 5 20 15 10 5 0 1.270 0.31 Device Count (N) 15 10 5 0.33 0.34 0.35 On-Resistance (Ω) 74.5 0.36 Typical Turn-On Time Distribution (N=50, TA=25ºC, IL=100mA, IF=5mA) 25 20 0.32 20 0.105 0.120 0.135 0.150 0.165 LED Current (mA) 15 10 5 2.5 1.3 1.2 IF=5mA IF=2mA 1.1 0 20 40 60 Temperature (ºC) 80 1.0 0.5 2.0 0.25 0.20 0.15 0.10 -40 1.5 -20 0 20 40 60 Temperature (ºC) 80 100 0.43 0.39 0.38 0.37 0.36 0.35 0.34 0 Typical LED Current to Operate vs. Temperature (IL=500mA) 0.40 0.41 0.42 Turn On Time (ms) 0.40 2.0 100 0.39 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 0.41 10 20 30 40 LED Forward Current (mA) 0 50 Typical Turn-On Time vs. Temperature (IL=100mA) IF=2mA 1.5 1.0 IF=5mA 0.5 0.0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 0.8 Turn-Off Time (ms) 0.30 -20 5 0.38 0.0 Turn-On Time (ms) 1.0 -40 10 0.585 Turn-Off Time(ms) 1.4 Turn-On Time (ms) 1.5 0.385 0.435 0.485 0.535 Turn Off Time (ms) Typical Turn-On Time vs. LED Forward Current (IL=100mA) Typical LED Forward Voltage Drop vs. Temperature IF=50mA IF=20mA IF=10mA 15 0 0.335 0.180 1.6 77.0 20 0 0 75.0 75.5 76.0 76.5 Blocking Voltage (VP) Typical Turn-Off Time Distribution (N=50, TA=25ºC, IL=100mA, IF=5mA) 25 Device Count (N) 1.255 1.260 1.265 LED Forward Voltage (V) Typical IF for Switch Operation (N=50, TA=25ºC, IL=100mA) 25 LED Forward Voltage (V) Typical Blocking Voltage Distribution (N=50, TA=25ºC) 25 0 1.250 LED Current (mA) 35 30 20 0 Device Count (N) Typical On-Resistance Distribution (N=50, TA=25ºC, IL=0.75A, IF=2mA) 20 Device Count (N) Device Count (N) 25 10 20 30 40 LED Forward Current (mA) 50 Typical Turn-Off Time vs. Temperature (IL=100mA) 0.7 IF=5mA 0.6 0.5 IF=2mA 0.4 0.3 0.2 -40 -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 CPC1019N PERFORMANCE DATA* Typical Load Current vs. Load Voltage (IF=2mA) 1000 Typical On-Resistance vs. Temperature (IL=500mA, IF=2mA) 0.70 250 0 -250 -500 -750 0.55 0.50 0.45 0.40 0.35 0.4 Typical Blocking Voltage vs. Temperature 80 78 70 Leakage Current (nA) 79 77 76 75 74 -20 0 20 40 60 Temperature (ºC) 80 100 0 20 40 60 Temperature (ºC) 80 600 550 -40 100 Typical Leakage Current vs. Temperature (VL=60V) 3.5 -20 0 20 40 60 Temperature (ºC) 80 100 10s 100s Energy Rating Curve (IF=2mA) 3.0 60 50 40 30 20 2.5 2.0 1.5 1.0 0.5 10 0 -40 650 450 -20 Load Current (A) 0.3 0.25 -40 700 500 0.30 -1000 -0.4 -0.3 -0.2 -0.1 0.0 0.1 0.2 Load Voltage (V) Blocking Voltage (VP) 750 0.60 Load Current (mA) On-Resistance (Ω) Load Current (mA) 500 73 -40 800 0.65 750 Maximum Load Current vs. Temperature (IF=2mA) -20 0 20 40 60 Temperature (ºC) 80 100 0.0 10μs 100μs 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 CPC1019N Manufacturing Information Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Pb e3 RoHS 2002/95/EC Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package Recommended PCB Land Pattern 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.60 (0.0217) 0.432 ± 0.127 (0.017 ± 0.005) 1.02 ± 0.025 (0.040 ± 0.001) Pin 1 2.54 Typ (0.100 Typ) 5.60 (0.2205) 1.30 (0.0512) 2.54 (0.10) 2.184 Max (0.086 Max) 0.0254 - 0.102 (0.001 - 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) Pin 1 B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 5 Specification: DS-CPC1019N-R01 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 11/3/08