BattHolSection - 2010:BattHolSection - 2005 8/6/10 16:28 Page 8 BATTERY HOLDERS BATTERY HOLDERS Panel Mounting AA SIZE BATTERY HOLDER ᔢ 1, 2 or 3 Cells ᔢ Flanged Panel Mount ᔢ Bayonet/Screwdriver release BX0011/1 AA SIZE BATTERY HOLDER ᔢ 4 Cells ᔢ Flanged Panel Mount ᔢ Drawer function BX0027 C SIZE BATTERY HOLDER ᔢ 1, 2 or 3 Cells ᔢ Panel Mount ᔢ Screw Cap/Hand release BX0001/1 Specification BX0011/1, BX0012/1, BX0013/1 BX0027 BX0001/1, BX0002/1,BX0003/1 Battery/Cell Type: AA (R6) AA (R6) C (R14) No. Cells: BX0011/1 - 1 cell BX0012/1 - 2 cells BX0013/1 - 3 cells 4 cells BX0001/1 - 1 cell BX0002/1 - 2 cells BX0003/1 - 3 cells Terminations: 2.8 series tabs/solder tags 4 solder tags (can be wired in series or in pairs) 2.8 series tabs/solder tags Operating Temperature: –30˚C to +70˚C –30˚C to +70˚C –30˚C to +70˚C Flammability Rating: UL94V-0 UL94V-0 UL94V-0 Mouldings: Glass Filled Nylon & Polyester Glass Filled Nylon Nylon & Glass Filled Nylon Contacts: Brass, Tin Plated Nickel Silver, clean Phosphor Bronze, Tin Plated Nickel Silver, clean Nickel Silver, clean Brass, Tin Plated Features: Bayonet cap with coin slot Rear support bracket Removable loading/latching drawer Screw on cap. Recommended torque for panel ring 1.13-1.7Nm (10-15lbf.in) Notes: Recommend 2 & 3 cell versions are supported by rear bracket Compliant Compliant Compliant 8 www.elektron-bulgin.com