Altivar® 312 drive selection guide The Altivar 312 drive is designed to make industrial and commercial machines more energy efficient, while at the same time simplifying its integration into a single control system architecture. With the highest overtorque and the only drive with a remote graphic keypad in its class, the Altivar 312 drive is ideally suited to the needs of material handling, packaging, food & beverage, pump & fan, and other OEM machines. It also comes standard with integrated communications port for Modbus and CANopen networks, and optional cards for CANopen Daisy Chain, DeviceNet and Profibus DP. HP Footnotes [1] Integrated C2 EMC filter. C1 EMC filter available as an option [2] No integrated EMC filter. C2 EMC filter available as an option [3] Integrated C2 EMC filter up to 5 HP and C3 EMC filter over 5 HP C1 and C2 EMC filters available as an option kW Amps Drive Reference Dimensions (in.) W Supply Voltage: Single-phase 208…240 V [1] 0.25 0.18 1.5 ATV312H018M2 2.83 0.5 0.37 3.3 ATV312H037M2 2.83 0.75 0.55 3.7 ATV312H055M2 2.83 1 0.75 4.8 ATV312H075M2 2.83 1.5 1.1 6.9 ATV312HU11M2 4.21 2 1.5 8 ATV312HU15M2 4.21 3 2.2 11 ATV312HU22M2 5.59 Supply Voltage: Three-phase 208…240 V [2] 0.25 0.18 1.5 ATV312H018M3 2.83 0.5 0.37 3.3 ATV312H037M3 2.83 H D 5.71 5.71 5.71 5.71 5.63 5.63 7.24 5.2 5.2 5.59 5.59 5.98 5.98 5.98 5.71 5.71 5.2 5.2 0.75 1 1.5 2 3 4 5 7.5 10 15 20 5.71 5.71 5.63 5.63 5.63 7.24 7.24 9.13 9.13 12.99 12.99 5.2 5.2 5.2 5.2 5.98 5.98 5.98 6.77 6.77 7.56 7.56 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 3.7 4.8 6.9 8 11 13.7 17.5 27.5 33 54 66 ATV312H055M3 ATV312H075M3 ATV312HU11M3 ATV312HU15M3 ATV312HU22M3 ATV312HU30M3 ATV312HU40M3 ATV312HU55M3 ATV312HU75M3 ATV312HD11M3 ATV312HD15M3 Make the most of your energy SM 2.83 2.83 4.13 4.13 4.21 5.59 5.59 7.09 7.09 9.64 9.64 HP kW Amps Drive Reference Dimensions (in.) W Supply Voltage: Three-phase 380...500 V [3] 0.5 0.37 1.5 ATV312H037N4 4.13 0.75 0.55 1.9 ATV312H055N4 4.13 1 0.75 2.3 ATV312H075N4 4.13 1.5 1.1 3 ATV312HU11N4 4.21 2 1.5 4.1 ATV312HU15N4 4.21 3 2.2 5.5 ATV312HU22N4 5.59 4 3 7.1 ATV312HU30N4 5.59 5 4 9.5 ATV312HU40N4 5.59 7.5 5.5 14.3 ATV312HU55N4 7.09 10 7.5 17 ATV312HU75N4 7.09 15 11 27.7 ATV312HD11N4 9.64 20 15 33 ATV312HD15N4 9.64 Supply Voltage: Three-phase 525...600 V [2] 1 0.75 1.7 ATV312H075S6 4.21 2 1.5 2.7 ATV312HU15S6 4.21 4 2.2 3.9 ATV312HU22S6 5.59 5 4 6.1 ATV312HU40S6 5.59 7.5 5.5 9 ATV312HU55S6 7.09 10 7.5 11 ATV312HU75S6 7.09 15 11 17 ATV312HD11S6 9.64 20 15 22 ATV312HD15S6 9.64 H D 5.63 5.63 5.63 5.63 5.63 7.24 7.24 7.24 9.13 9.13 12.99 12.99 5.2 5.2 5.2 5.98 5.98 5.98 5.98 5.98 6.77 6.77 7.56 7.56 5.63 5.63 7.24 7.24 9.13 9.13 12.99 12.99 5.98 5.98 5.98 5.98 6.77 6.77 7.56 7.56 200 V -15% to 240 V +10% Input voltage 380 V -15% to 500 V +10% 525 V -15% to 600 V +10% Input frequency 50 Hz -5% to 60 Hz +5% Output frequency 0.5 to 500 Hz Torque/overtorque 170…200% of nominal motor torque Current (transient) 150% for 60 seconds Switching Frequency Selectable from 2 kHz to 16 kHz (ranges vary depending on drive) Functions 50 Preset speeds 16 Analogue inputs 3 Analogue outputs 1 Logic inputs 6 Relay outputs 2 Voltage/frequency Motor control profiles Sensorless flux vector control (asynchronous motors) Quadratic ratio for pumps and fans Environmental Specifications Operating temperature +14° to +122° F (-10° to +50° C) without derating, up to 140° F (60° C) with derating Storage temperature -13° to +158° F (-25° to +70° C) Humidity 95% with no condensation or dripping water, conforming to IEC 600068-2-3 Altitude 3300 ft. (1000 m) without derating 3300-9850 ft. (1000-3000 m) derate output current by 1% for each additional 330 ft. (100 m). Limited to 6560 ft. (2000 m) on a single phase or a corner grounded distribution system. Enclosure rating IP20 rating with optional conduit kits for UL Type 1 Vibration resistance Conforming to IEC 60068-2-6: 1.5 mm peak to peak from 3 Hz to 13 Hz, 1 gn from 13 to 150 Hz Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27 Energy saving Speed range 50:1 Communication Options Codes and standards UL, CSA, CE, NOM, GOST and C-Tick Protocol Reference Profibus VW3A31207 CANopen Daisy Chain VW3A31208 DeviceNet VW3A31209 Please contact your local Schneider Electric representative for NEMA Type 1 kits, Din rail mount kits, and any other additional accessories. Schneider Electric Automation and Control Center of Excellence 8001 Knightdale Blvd. Knightdale, NC 27545 Tel: 919-266-3671 www.Schneider-Electric.us Document Number 8800HO0901R01/10 January 2010 lh © 2010 Schneider Electric All Rights Reserved Electrical Specifications