Power 1 Form A High Capacity (AQZ26) VDE High capacity up to 6A in a slim SIL package Power 1 Form A High Capacity (AQZ26) AQZ26 FEATURES Max. 9.0 .354 Max. 43.0 1.693 Max. 32.0 1.260 Height includes standoff CAD Data CAD Data mm inch 1 - 2 + 3 4 5. Low-level off state leakage current of max. 10 A 6. Controls low-level analog signals The triac, photocoupler, or SSR cannot be used to control signals of less than several hundred mV. The high capacity type power PhotoMOS relay feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 1. High capacity type power PhotoMOS relay. Can switch a wide range of currents and voltages. Can control various types of loads, from very small loads to a max. 6A AC/DC current for sequencers, motors, and lamps. 2. Low on-resistance and high sensitivity. Low on-resistance of less than typ. 0.036 (AQZ262). High sensitivity LED operate current of typ. 1 mA. 3. AC/DC dual use Bi-directional control is possible. There is no need to differentiate depending on the load as was necessary with the conventional SSR. 4. 4-pin SIL type (L) 43.0 mm (W) 9.0 mm (H) 32.0 mm (L) 1.693 inch (W) .354 inch (H) 1.260 inch. TYPICAL APPLICATIONS • Mercury relay replacement • Compact motors, lamps, heaters • OA equipment TYPES Output rating* Load voltage Load current AC/DC dual use 60 V 400 V 6.0 A 1.0 A Package Part No. SIL4-pin AQZ262 AQZ264 Packing quantity Inner carton Outer carton 20 pcs 200 pcs * Indicate the peak AC and DC values. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Operating Storage ds_x615_en_aqz262_264: 011212J Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQZ262 AQZ264 50 mA 5V 1A 75 mA 60 V 6.0 A 10.0 A Remarks f = 100Hz, Duty factor = 0.1% 400 V 1.0 A 3.0 A 3.0 W 3.0 W 1,500 V AC –40C to +85C –40F to 185F –40C to +100C –40F to 212F Peak AC, DC 100 ms (1shot), VL = DC Non-condensing at low temperatures 1 Power 1 Form A High Capacity (AQZ26) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical LED operate current Input Maximum Minimum Typical Typical Maximum LED turn off current LED dropout voltage IFon IFoff Maximum VF 1.0 0.05 1.4 IF = 10 mA IL = max. Within 1 s on time IF = 0 mA VL = max. IF = 10 mA IL = 100 mA VL = 10 V IF = 10 mA IL = 100 mA VL = 10 V 10 A 5 ms 4 ms Ton Maximum 10 ms 0.32 ms Typical Turn off time* 0.14 ms Toff Maximum Transfer characteristics IF = 50 mA 0.036 ILeak Typical Turn on time* IL = 100 mA VL = 10 V 0.9 mA 1.25 V (1.16 V at IF = 10 mA) 1.5 V Maximum Off state leakage current Remarks IL = 100 mA VL = 10 V 3.0 mA 0.4 mA Ron Output AQZ264 1.0 mA Typical On resistance AQZ262 Typical I/O capacitance 3.0 ms 2.0 pF Ciso Initial I/O isolation resistance Maximum Minimum Riso 4.0 pF 1,000 M Maximum operating frequency Maximum — 0.5 cps f = 1 MHz VB = 0 V 500 V DC IF = 10 mA Duty factor = 50% IL = Max., VL = Max. *Turn on/off time Input 90% Output 10% Ton Toff RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Input LED current Symbol IF Recommended value Unit 5 to 10 mA Dimensions Schematic and Wiring Diagrams Cautions for Use ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic technical representative. Please refer to our information on PhotoMOS Relays for Automotive Applications. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. Load current vs. ambient temperature characteristics in adjacent mounting 3. On resistance vs. ambient temperature characteristics Allowable ambient temperature: –40C to +85C –40F to +185F IL: Load current; IL (max.): Maximum continuous load current LED current: 10 mA; Continuous load current: 6A (DC)(AQZ262) 1A (DC)(AQZ264) 120 7 5 4 3 =10mm .394 inch 60 1.5 AQZ264 1 40 2 1 =20mm .787 inch 80 On resistance, Ω 100 IL/IL(max.)×100, % Load current, A 6 2 AQZ262 0.5 AQZ264 20 =Adjacent mounting pitch AQZ262 0 -40 -20 2 0 20 40 60 8085 100 Ambient temperature, °C 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, °C 0 -40 -20 80 85 0 20 40 60 Ambient temperature, °C ds_x615_en_aqz262_264: 011212J Power 1 Form A High Capacity (AQZ26) 4. Turn on time vs. ambient temperature characteristics 5. Turn off time vs. ambient temperature characteristics 6. LED operate vs. ambient temperature characteristics LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 0.8 6 AQZ262 4 5 LED operate current, mA 8 Turn off time, ms 1 Turn on time, ms 10 0.6 AQZ262 0.4 AQZ264 AQZ264 0.2 2 0 -40 -20 3 2 AQZ264 AQZ262 1 0 80 85 0 20 40 60 Ambient temperature, °C 4 -40 -20 0 0 20 40 60 80 85 Ambient temperature, °C -40 -20 80 85 0 20 40 60 Ambient temperature, °C 7. LED turn off current vs. ambient temperature characteristics 8. LED dropout voltage vs. ambient temperature characteristics 9. Current vs. voltage characteristics of output at MOS portion Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Sample: all types; LED current: 5 to 50 mA Ambient temperature: 25C 77F 1.5 4 3 AQZ264 2 1 -40 -20 1.4 1.3 6.0 AQZ262 4.0 2.0 AQZ264 -2.0 -1.5 -1.0 -0.5 1.2 50mA 30mA 20mA 10mA 5mA 1.1 0.5 1.0 1.5 -2.0 2.0 Voltage, V -4.0 1.0 AQZ262 0 8.0 Current, A LED dropout voltage, V LED turn off current, mA 5 -6.0 0 0 20 40 60 8085 Ambient temperature, °C -40 -20 -8.0 0 20 40 60 80 85 100 Ambient temperature, °C 10.Off state leakage current vs. load voltage characteristics 11.Turn on time vs. LED forward current characteristics 12.Turn off time vs. LED forward current characteristics Ambient temperature: 25C 77F Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F 0.6 10-6 AQZ262 10 -9 0.5 40 Turn off time, ms Turn on time, ms Off state leakage current, A 50 10-3 30 20 10 50 Load voltage, V 0 100 0 10 0 20 30 40 50 LED forward current, mA 13.Maximum operating frequency vs. load voltage/current characteristics 14.Output capacitance vs. applied voltage characteristics LED current: 10 mA; Ambient temperature: 25C 77F Frequency: 10 KHz; Ambient temperature: 25C 77F 0 10 20 30 40 50 LED forward current, mA 5000 10 9 duty = 50% 8 7 6 5 4 Output capacitance, pF Maximum operating frequency, time/s AQZ264 0.1 10-12 0 0.3 0.2 AQZ262 AQZ264 AQZ264 AQZ262 0.4 4000 3000 2000 3 AQZ262 1000 2 1 0 AQZ264 0 50 100 150 200 250 300 350 400 450 Load voltage, V ×load current, A ds_x615_en_aqz262_264: 011212J 0 0 20 40 60 80 Applied voltage, V 100 3