Rochester CD4049UBCM Cd4049ubm hex inverting buffer cd4050bm cd4050bc hex non-inverting buffer Datasheet

CD4049/CD4050
March 1988
CD4049UBMCD4049UBC Hex Inverting Buffer
CD4050BMCD4050BC Hex Non-Inverting Buffer
General Description
Features
These hex buffers are monolithic complementary MOS
(CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors€ These devices feature
logic level conversion using only one supply voltage (VDD)€
The input signal high level (VIH) can exceed the VDD supply
voltage when these devices are used for logic level conversions€ These devices are intended for use as hex buffers‡
CMOS to DTLTTL converters‡ or as CMOS current drivers‡
and at VDD e 5€0V‡ they can drive directly two DTLTTL
loads over the full operating temperature range€
Y
Y
Y
Y
Wide supply voltage range
3€0V to 15V
Direct drive to 2 TTL loads at 5€0V over full temperature range
High source and sink current capability
Special input protection permits input voltages greater
than VDD
Applications
Y
Y
Y
Y
CMOS
CMOS
CMOS
CMOS
hex inverterbuffer
to DTLTTL hex converter
current ‘‘sink’’ or ‘‘source’’ driver
high-to-low logic level converter
Connection Diagrams
CD4050BMCD4050BC
Dual-In-Line Package
CD4049UBMCD4049UBC
Dual-In-Line Package
TLF5971 – 1
CD4049UBMCD4049UBC Hex Inverting Buffer
CD4050BMCD4050BC Hex Non-Inverting Buffer
© 2013 Rochester Electronics, LLC. All Rights Reserved 03122013
TLF5971 – 2
Top View
Top View
Order Number CD4049UB or CD4049B
Order Number CD4050UB or CD4050B
For complete Rochester ordering guide, please refer to page 2
Please consult factory for specific package availability
C1995 National Semiconductor Corporation
TLF5971
RRD-B30M105Printed in U€ S€ A€
Rochester Electronics guarantees performance of its semiconductor products to the original OEM specifications. “Typical” values are for reference purposes
only. Certain minimum or maximum ratings may be based on product characterization, design, simulation, or sample testing. Rochester Electronics reserves
the right to make changes without further notice to any specification herein.
Specification Number CD4049_50UB-M-(N) REV -
Page 1 of 7
CD4049/CD4050
Rochester Ordering Guide
*Most products can also be offered as RoHS compliant, designated by a –G suffix. Please contact factory for more information.
Rochester Part Number
National Part Number
Package
Temperature
CDIP-16
-40° to +85°C
CDIP-16
-40° to +85°C
SOP-16, Plastic
-40° to +85°C
CD4049UBCJ
CD4049UBCJ
CD4049UBCJ/A+
CD4049UBCJ/A+
CD4049UBCM
CD4049UBCM
CD4049UBCN
CD4049UBCN
PDIP-16
-40° to +85°C
CD4049UBCN/A+
CD4049UBCN/A+
PDIP-16
-40° to +85°C
CD4049UBCN/B+
CD4049UBCN/B+
PDIP-16
-40° to +85°C
CD4049UBMJ
CD4049UBMJ
CDIP-16
-55° to +125°C
CD4049UBMJ/B
CD4049UBMJ/883
CDIP-16
-55° to +125°C
CD4049UBMN
CD4049UBMN
PDIP-16
-55° to +125°C
CD4049UBMW
CD4049UBMW
FP-16, Ceramic
-55° to +125°C
CD4049UBMW/B
CD4049UBMW/883
FP-16, Ceramic
-55° to +125°C
CD4050BCJ
CD4050BCJ
CDIP-16
-40° to +85°C
CD4050BCJ/A+
CD4050BCJ/A+
CDIP-16
-40° to +85°C
CD4050BCM
CD4050BCM
SOP-16, Plastic
-40° to +85°C
CD4050BCM/A+
CD4050BCM/A+
SOP-16, Plastic
-40° to +85°C
CD4050BCN
CD4050BCN
PDIP-16
-40° to +85°C
CD4050BCN/A+
CD4050BCN/A+
PDIP-16
-40° to +85°C
CD4050BCN/B+
CD4050BCN/B+
PDIP-16
-40° to +85°C
CD4050BMD
CD4050BMD
CDIP-16
-55° to +125°C
CD4050BMJ
CD4050BMJ
CDIP-16
-55° to +125°C
CD4050BMN
CD4050BMN
PDIP-16
-55° to +125°C
CD4050BMW
CD4050BMW
CDIP-16
-55° to +125°C
Specification Number CD4049_50UB-M-(N) REV -
Page 2 of 7
CD4049/CD4050
Absolute Maximum Ratings (Notes 1 2)
Recommended Operating
If Military Aerospace specified devices are required
Conditions (Note 2)
please contact the National Semiconductor Sales
Supply
Voltage (VDD)
3V to 15V
Absolute
Maximum
Ratings
(Notes
1
2)
Recommended
Operating
Office Distributors for availability and specifications
Input Voltage (VIN)
0V to 15V
If Military
Aerospace
specified devicesbare
Conditions
(Note 2)
Supply
Voltage
(VDD)
0 5Vrequired
to a 18V
0 to VDD
Voltage at Any Output Pin (VOUT)
please contact the National Semiconductor Sales
b 0 5V to a 18V
Supply Voltage (VDD)
3V to 15V
Input Voltage (VIN)
Office Distributors
for availability and specifications
Operating Temperature Range (TA)
b
a
Input Voltage (VIN)
0V to 15V
0 5Vbto VDD a0 5V
Voltage at Any Output Pin (VOUT)
b 55 C to a 125 C
CD4049UBM„ CD4050BM
Supply Voltage (VDD)
0 5V to 18V
b 65 C to a 150 C
to85
VDD
Voltage
at Any Output
Pin (VOUT)
Storage Temperature Range (TS)
b 40 C to0 a
CD4049UBC„
CD4050BC
C
b 0 5V to a 18V
Input Voltage (VIN)
Operating Temperature Range (TA)
Power Dissipation (PD)
b 0 5V to VDD a 0 5V
Voltage at Any Output Pin (VOUT)
b 55 C to a 125 C
CD4049UBM„ CD4050BM
Dual-In-Line
700 mW
b 65 C to a 150 C
Storage
Temperature Range (TS)
b 40 C to a 85 C
CD4049UBC„ CD4050BC
Small Outline
500 mW
Power
Dissipation (P
Lead Temperature
(TDL))
Dual-In-Line10 seconds)
700
mW
(Soldering„
260
C
Small Outline
500 mW
Lead Temperature (TL)
(Soldering„
10 seconds)
260 C
DC
Electrical
Characteristics CD4049M‹CD4050BM
(Note 2)
b 55 C
Symbol
Parameter
Conditions
DC Electrical
Characteristics
CD4049M‹CD4050BM
2)
Min (Note
Max
a 25 C
Min
Typ
a 125 C
Max
Min
Units
Max
b 55 C1 0
a02501
a 125 C
C 1 0
VDD e 5V
30
mA
Units
Conditions
VDD e 10V
20
0Typ
01 Max
20
60
mA
Min
Max
Min
Min
Max
VDD e 15V
40
0 03
40
120
mA
IDD
Quiescent Device Current
VDD e 5V
10
0 01
10
30
mA
e
e
VOL
Low Level Output Voltage
V
V
„
V
0V„
DD IL
VIH
20
0 01
20
60
mA
DD e 10V
mA
lIODDl ke115V
V
40
0 03
40
120
mA
VDD e 5V
0 05
0
0 05
0 05
V
e
e
VOL
Low Level Output Voltage
V
V
„
V
0V„
DD IL
VIH
0 05
0
0 05
0 05
V
DD e 10V
k
mA
lIODDl e115V
V
0 05
0
0 05
0 05
V
VDD e 5V
0 05
0
0 05
0 05
V
VOH
High Level Output Voltage V
VIH e
V10V
„ VIL e 0V„
DD
e
0 05
0
0 05
0 05
V
DD
mA
lIODDl ke115V
V
0 05
0
0 05
0 05
V
e
VDD
5V
4 95
4 95
5
4 95
V
e
VOH
High Level Output Voltage V
VIH e
V
„
V
0V„
DD IL
9 95
9 95
10
9 95
V
DD e 10V
k
I
1
mA
l ODDl e 15V
V
14 95
14 95
15
14 95
V
VDD e 5V
4 95
4 95
5
4 95
V
k
VIL
Low Level Input Voltage
mA
lIODDl e110V
V
9 95
9 95
10
9 95
V
(CD4050BM Only)
VDD e
5V„ V e 0 5V
15
25
15
15
V
V
14 95
14 95 215
14 95
V
DD e 15V O
VDD e 10V„ VO e 1V
30
45
30
30
V
VIL
Low Level Input Voltage
mA V e 1 5V
lVIODDl ke115V„
40
6 75
40
40
V
O
(CD4050BM Only)
VDD e 5V„ VO e 0 5V
15
2 25
15
15
V
VIL
Low Level Input Voltage
mA V e 1V
lVIODDl ke110V„
30
45
30
30
V
O
(CD4049UBM Only)
VDD e
5V„ VO ee415V
10
0
5
10
0
10
0
V
V
5V
4
6175
4
4
V
DD e 15V„ V
O
VDD e 10V„ VO e 9V
20
25
20
20
V
VIL
Low Level Input Voltage
mA V e 13 5V
lIODDl ke115V„
V
30
35
30
30
V
O
(CD4049UBM Only)
VDD e 5V„ VO e 4 5V
10
15
10
10
V
k
VIH
High Level Input Voltage
I
1
mA
l ODDl e 10V„ VO e 9V
V
20
25
20
20
V
e
e
(CD4050BM Only)
VDD e 5V„
5V5V
35
35
2375
35
V
OO e413
V
15V„VV
30
5
30
30
V
DD
VDD e 10V„ VO e 9V
70
70
55
70
V
k
VIH
High Level Input Voltage
mA V e 13 5V
lIODDl e115V„
V
11 0
11 0
8 25
11 0
V
O
(CD4050BM Only)
VDD e 5V„ VO e 4 5V
35
35
2 75
35
V
k
VIH
High Level Input Voltage
mA V e 9V
lIODDl e110V„
V
70
70
55
70
V
O
(CD4049UBM Only)
VDD e
5V„ VO ee013
5V5V
4 00
4 00
5
4 00
V
V
11
11
8325
11
V
DD e 15V„ V
O
VDD e 10V„ VO e 1V
80
80
75
80
V
VIH
High Level Input Voltage
mA V e 1 5V
lIODDl ke115V„
V
12 0
12 0
11 5
12 0
V
O
(CD4049UBM Only)
VDD e 5V„ VO e 0 5V
40
40
35
40
V
e
e
IOL
Low Level Output Current
V
V
„
V
0V
IH
DD
IL
e
e
VDD
10V„ VO
1V
80
80
75
80
V
(Note 3)
VDD e
5V„ VO ee014V
5 60
4 60
3 20
mA
V
5V
12
12
115 5
12
V
DD e 15V„ V
O
VDD e 10V„ VO e 0 5V
12
98
12
68
mA
e
e
IOL
Low Level Output Current
V
V
„
V
0V
IH e 15V„
DD VIL e 1 5V
VDD
35
29
40
20
mA
O
(Note 3)
VDD e 5V„ VO e 0 4V
56
46
5
32
mA
Note 1ƒ ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaranteed˜ they are not meant to imply that the devices
e 0 5VConditions’’
12 and ‘‘Electrical Characteristics’’
98
12 provides conditions
6 8 for actual device
mA
DD e 10V„ VO
should be operated at these limits The table of V‘‘Recommended
Operating
operation
VDD e 15V„ VO e 1 5V
35
29
40
20
mA
IDD
Symbol
Quiescent Device Current
Parameter
Note
2ƒ ‘‘Absolute
VSS e 0VMaximum
unless otherwise
Note 1ƒ
Ratings’’specified
are those values beyond which the safety of the device cannot be guaranteed˜ they are not meant to imply that the devices
Note 3ƒbe
These
are peak
outputlimits
current
capabilities
Continuous output
current isConditions’’
rated at 12 and
mA maximum
output currentprovides
should not
be allowed
exceed
this
should
operated
at these
The
table of ‘‘Recommended
Operating
‘‘ElectricalThe
Characteristics’’
conditions
for to
actual
device
value for extended periods of time IOL and IOH are tested one output at a time
operation
Note 2ƒ VSS e 0V unless otherwise specified
2
Note 3ƒ These are peak output current capabilities Continuous output current is rated at 12 mA maximum The output current should not be allowed to exceed this
value for extended periods of time IOL and IOH are tested one output at a time
2
Specification Number CD4049_50UB-M-(N) REV -
Page 3 of 7
CD4049/CD4050
DC Electrical Characteristics CD4049MCD4050BM (Note 2) (Continued)
Symbol
Parameter
b 55 C
Conditions
Min
IOH
IIN
High Level Output Current
(Note 3)
VIH e VDD VIL e 0V
VDD e 5V VO e 46V
VDD e 10V VO e 95V
VDD e 15V VO e 135V
Input Current
VDD e 15V VIN e 0V
VDD e 15V VIN e 15V
a 25 C
Max
b 13
b 26
b 80
Min
Typ
b 11
b 22
b 72
b 16
b 36
b 12
a 125 C
Max
Min
Units
Max
b 072
b 15
b 50
mA
mA
mA
b 01
b 10 b 5
b 01
b 10
01
10b5
01
10
mA
mA
Note 1 ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteedŽ they are not meant to imply that the devices
should be operated at these limits The table of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provides conditions for actual device
operation
Note 2 VSS e 0V unless otherwise specified
Note 3 These are peak output current capabilities Continuous output current is rated at 12 mA maximum The output current should not be allowed to exceed this
value for extended periods of time IOL and IOH are tested one output at a time
DC Electrical Characteristics CD4049UBCCD4050BC (Note 2)
Symbol
Parameter
b 40 C
Conditions
Min
IDD
Quiescent Device Current
VDD e 5V
VDD e 10V
VDD e 15V
VOL
Low Level Output Voltage
VIH e VDD VIL e 0V
lIOl k 1 mA
VDD e 5V
VDD e 10V
VDD e 15V
VOH
VIL
VIL
VIH
VIH
High Level Output Voltage
VIH e VDD VIL e 0V
lIOl k 1 mA
VDD e 5V
VDD e 10V
VDD e 15V
Max
a 25 C
Max
4
8
16
003
005
007
40
80
160
30
60
120
mA
mA
mA
005
005
005
0
0
0
005
005
005
005
005
005
V
V
V
495
995
1495
5
10
15
Min
Units
Typ
495
995
1495
Min
a 85 C
Max
495
995
1495
V
V
V
Low Level Input Voltage
(CD4050BC Only)
lIOl k 1 mA
VDD e 5V VO e 05V
VDD e 10V VO e 1V
VDD e 15V VO e 15V
15
30
40
225
45
675
15
30
40
15
30
40
V
V
V
Low Level Input Voltage
(CD4049UBC Only)
lIOl k 1 mA
VDD e 5V VO e 45V
VDD e 10V VO e 9V
VDD e 15V VO e 135V
10
20
30
15
25
35
10
20
30
10
20
30
V
V
V
High Level Input Voltage
(CD4050BC Only)
lIOl k 1 mA
VDD e 5V VO e 45V
VDD e 10V VO e 9V
VDD e 15V VO e 135V
35
70
110
35
70
110
275
55
825
35
70
110
V
V
V
High Level Input Voltage
(CD4049UBC Only)
lIOl k 1 mA
VDD e 5V VO e 05V
VDD e 10V VO e 1V
VDD e 15V VO e 15V
40
80
120
40
80
120
35
75
115
40
80
120
V
V
V
Note 1 ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteedŽ they are not meant to imply that the devices
should be operated at these limits The table of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provides conditions for actual device
operation
Note 2 VSS e 0V unless otherwise specified
Note 3 These are peak output current capabilities Continuous output current is rated at 12 mA maximum The output current should not be allowed to exceed this
value for extended periods of time IOL and IOH are tested one output at a time
3
Specification Number CD4049_50UB-M-(N) REV -
Page 4 of 7
CD4049/CD4050
DC Electrical Characteristics CD4049UBCCD4050BC (Note 2) (Continued)
Symbol
Parameter
b 40 C
Conditions
Min
IOL
Low Level Output Current
(Note 3)
VIH e VDD VIL e 0V
VDD e 5V VO e 04V
VDD e 10V VO e 05V
VDD e 15V VO e 15V
a 25 C
Max
46
98
29
High Level Output Current VIH e VDD VIL e 0V
b 10
(Note 3)
VDD e 5V VO e 46V
VDD e 10V VO e 95V b21
VDD e 15V VO e 135V b71
IOH
IIN
Input Current
VDD e 15V VIN e 0V
VDD e 15V VIN e 15V
a 85 C
Max
Min
Typ
40
85
25
5
12
40
32
68
20
mA
mA
mA
b 09
b 19
b 62
b 16
b 36
b 12
b 072
b 15
b5
mA
mA
mA
b 03 b 10 b 5
b 03
03
Units
Min
03
Max
b 10
10b5
mA
mA
10
AC Electrical Characteristics CD4049UBMCD4049UBC
TA e 25 C CL e 50 pF RL e 200k tr e tf e 20 ns unless otherwise specified
Parameter
Conditions
Typ
Max
Units
tPHL
Symbol
Propagation Delay Time
High-to-Low Level
VDD e 5V
VDD e 10V
VDD e 15V
Min
30
20
15
65
40
30
ns
ns
ns
tPLH
Propagation Delay Time
Low-to-High Level
VDD e 5V
VDD e 10V
VDD e 15V
45
25
20
85
45
35
ns
ns
ns
tTHL
Transition Time
High-to-Low Level
VDD e 5V
VDD e 10V
VDD e 15V
30
20
15
60
40
30
ns
ns
ns
tTLH
Transition Time
Low-to-High Level
VDD e 5V
VDD e 10V
VDD e 15V
60
30
25
120
55
45
ns
ns
ns
CIN
Input Capacitance
Any Input
15
225
pF
AC Parameters are guaranteed by DC correlated testing
AC Electrical Characteristics CD4050BMCD4050BC
TA e 25 C CL e 50 pF RL e 200k tr e tf e 20 ns unless otherwise specified
Symbol
Parameter
Conditions
Typ
Max
Units
tPHL
Propagation Delay Time
High-to-Low Level
VDD e 5V
VDD e 10V
VDD e 15V
Min
60
25
20
110
55
30
ns
ns
ns
tPLH
Propagation Delay Time
Low-to-High Level
VDD e 5V
VDD e 10V
VDD e 15V
60
30
25
120
55
45
ns
ns
ns
tTHL
Transition Time
High-to-Low Level
VDD e 5V
VDD e 10V
VDD e 15V
30
20
15
60
40
30
ns
ns
ns
tTLH
Transition Time
Low-to-High Level
VDD e 5V
VDD e 10V
VDD e 15V
60
30
25
120
55
45
ns
ns
ns
CIN
Input Capacitance
Any Input
5
75
pF
AC Parameters are guaranteed by DC correlated testing
4
Specification Number CD4049_50UB-M-(N) REV -
Page 5 of 7
CD4049/CD4050
Schematic Diagrams
CD4049UBM CD4049UBC
1 of 6 Identical Units
CD4050BM CD4050BC
1 of 6 Identical Units
TLF5971 – 4
TLF5971 – 3
Switching Time Waveforms
TLF5971 – 5
Typical Applications
CMOS to TTL or CMOS at a Lower VDD
Note‚ VDD1 t VDD2
TLF5971 – 6
Note‚ In the case of the CD4049UBMCD4049UBC
the output drive capability increases with increasing
input voltageƒ Eƒgƒ If VDD1 e 10V the CD4049UBM
CD4049UBC could drive 4 TTL loadsƒ
5
Specification Number CD4049_50UB-M-(N) REV -
Page 6 of 7
CD4049UBMCD4049UBC Hex Inverting Buffer
CD4050BMCD4050BC Hex Non-Inverting Buffer
CD4049/CD4050
Physical Dimensions inches (millimeters)
Ceramic Dual-In-Line Package (J)
Order Number CD4049UBMJƒ CD4049UBCJƒ CD4049BMJ or CD4049BCJ
NS Package Number J16A
Molded Dual-In-Line Package (N)
Order Number CD4050BMNƒ CD4050BCNƒ CD4050BMN or CD4050BCN
NS Package Number N16E
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION As used herein
1 Life support devices or systems are devices or
systems which‰ (a) are intended for surgical implant
into the body‰ or (b) support or sustain life‰ and whose
failure to perform‰ when properly used in accordance
with instructions for use provided in the labeling‰ can
be reasonably expected to result in a significant injury
to the user
National Semiconductor
Corporation
1111 West Bardin Road
Arlington‰ TX 76017
Tel 1(800) 272-9959
Fax 1(800) 737-7018
2 A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system‰ or to affect its safety or
effectiveness
National Semiconductor
Europe
Fax (a49) 0-180-530 85 86
Email cnjwge tevm2nsccom
Deutsch Tel (a49) 0-180-530 85 85
English Tel (a49) 0-180-532 78 32
Franais Tel (a49) 0-180-532 93 58
Italiano Tel (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd’
13th Floor‰ Straight Block‰
Ocean Centre‰ 5 Canton Rd
Tsimshatsui‰ Kowloon
Hong Kong
Tel (852) 2737-1600
Fax (852) 2736-9960
National Semiconductor
Japan Ltd’
Tel 81-043-299-2309
Fax 81-043-299-2408
National does not assume any responsibility for use of any circuitry described‰ no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications
Rochester Electronics guarantees performance of its semiconductor products to the original OEM specifications. “Typical” values are for reference purposes
only. Certain minimum or maximum ratings may be based on product characterization, design, simulation, or sample testing. Rochester Electronics reserves
the right to make changes without further notice to any specification herein.
Specification Number CD4049_50UB-M-(N) REV -
Page 7 of 7
Similar pages