Ohmite AP72547RF Low inductance Datasheet

AP725 20W TO-263 Power Resistor
• Power Dissipation 20 watts with h/s
• Low inductance
• D2PAK housing
• Electrically isolated from backplate
• TCR Options ±100 ppm/°C
• RoHS Compliant
Characteristics
Tolerance (Code):
± 1% (F), ± 5% (J)
Value range:
R02 to 130K (with standard resistance values)
Power rating:
20W at 25˚C case temperature
Temperature coefficient:
±100ppm/˚C
Thermal resistance:
6.5˚C/W
Inductance:
0.1µH maximum
Operating voltage:
√P*R with a maximum of 250V
Dielectric strength:
2kVac
Insulation resistance:
10GΩ
Operating temperature:
-55˚C to 155˚C
PWR263S-20 Series Power Resistor
Re
Product Dimensions
10.1
(0.398)
7.8
(0.307)
48 °
Electrical Specifications
4.5
(0.177)
1.6
(0.063)
1.3
(.051)
10.4
(0.409)
REF.
1
(0
15.39
(0.606)
8.8
(0.347)
Parameter
Specification
Short term overload (2x Pr for R < 2Ω, 1.6 x Pr for R ≥ 2Ω, V < 1.5x operating voltage)
∆R ±0.25%
Load life ( 1000 hours at rated power)
Thermal shock (-55˚C to 155˚C, 5 cycles)
1.4
(0.055)
5.08
(0.20)
∆R ±1.0%
1.92
(0.076)
∆R ±0.5%
Resistance to soldering heat (10 sec at 270˚C)
∆R ±0.5%
Vibration (20 G 10 - 2000Hz .06” D.A)
∆R ±0.25%
Moisture sensitivity level
1
3.1
(0.122)
0.25
(0.010)
MM
(INCHES)
±0.38
TOLERANCE:
UNLESS OTHERWISE NOTED
(±0.015)
DIMENSIONS:
LEAD
0.102 MAX AT MOUNTING
COPLANARITY: (0.004) SURFACE
275
<1> Maximum of 20 seconds between
260 °C peak
+245 °C and +260 °C
Power dissipation is 2.8W at an ambient temperature of 25°C
<1> 245 °C
225
when mounted on a double sided copper using FR4, 70μm of
H
220 °C
Temperature (°C)
copper 39x30x1.6mm
RESIS
CODE
MANU
TRAD
Soldering Profile
Soldering Profile
Ty
190 °C
175
60 - 90
seconds
Ramp Down
6 °C/second
150 °C
125
Mod
P
Pack
2
60 - 120 seconds
10 seconds minimum
Pin S
S
75
Ramp Up
3 °C/second maximum
25
0
50
100
Pow
2
150
Time (seconds)
200
250
300
Power dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a
double-sided copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm.
Resi
<
≥
Abso
J
F
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
For more information and ordering, please consult
www.arcolresistors.com
Page 1 of 2
2/14.05
Pack
E
B
AP725 20W TO-263 Power Resistor
PWR263S-20 Series Power Resistor
PWR263S-20 Series Power Resistor
Dimensions (mm ± 0.38)
Recommended Padpad
Layout layout
Recommended
Product Dimensions
Product Dimensions
10.1
(0.398)
7.8
(0.307)
1.6 10.1
(0.398)
(0.063)
7.8
(0.307)
48 °
10.4
(0.409)
REF.
8.8
(0.347)
11.0
(.433)
1.3
4.5
(.051)
(0.177)
1.6
(0.063)
10.4
(0.409)
REF.
48 °
Recommended Pad Layout
4.5
(0.177)
1.3
(.051)
15.39
(0.606)
4.02
(0.158)
15.39
(0.606)
4.02
(0.158)
10.52
(0.414)
10.52
(0.414)
2.25
(0.089)
8.8
(0.347)
2.25
(0.089)
4.23
(0.166)
1.92
(0.076)
1.4
(0.055)
20 Series Power Resistor
5.08
5.08
(0.20)
1.4
(0.055)
0.25
(0.010)
(0.20)
3.1
(0.122)
(0.076)
0.25
(0.010)
275
+245 °C and +260 °C
260 °C peak
<1> Maximum of 20 seconds
<1> between
245 °C
+245 °C and +260 °C
225
125
1.92
(0.076)
150 °C
125
60 - 90
seconds
190 °C
0.25
(0.010)
60 - 90
seconds
Ramp Down
6 °C/second
3.1
(0.122)
25
(0.004)AP72530RF
SURFACE
50
6 °C/second
(.315)
Ramp AP72525RF
Up
MAX
AT MOUNTINGAP72575RF
30.102
°C/second
maximum
AP725100RF
MODEL
NUMBER
MODEL
NUMBER
TOLERANCE
263 20
DATE CODE
XXXX X%
COUNTRY
OF ORIGIN YYY
COSTA R ICA
TOLERANCE
DATE CODE
COUNTRY
OF ORIGIN
How to Order
0
How
PWR 100
263
S 115
-to20Order
- 130
10R0 F
145E
85
155
RESISTANCE
CODE
Resistor Model
PWR = Power
Resistor
Package
263 = D2PAK
60 - 120 seconds
AP725R1F
AP7255RF
LEAD
AP725R5F
AP72510RF
COPLANARITY:
AP7251RF50
AP72512RF
100
AP7251R5F 25 0 AP72515RF50
AP7252RF
AP72520RF
263 20
RESISTANCE
XXXX
CODE X%
YYY
COSTA R ICA
MANUFACTURER'S
TRADEMARK
Backplate
Temperature
263 S - 20 - 10R0 F E
2.4 Ambient
TemperaturePWR
(°C)
Model
(0.095)
°C
PWR
=
Power
Ramp Down
8.0
Standard part numbers
0
Marking
Typical Part Marking
0.26
(0.10)
20
4.23
(0.166)
220 °C
60 - 120 seconds
MM
DIMENSIONS:10 seconds minimum
(INCHES)
Typical
10 seconds minimum
±0.38
Ramp TOLERANCE:
Up
UNLESS OTHERWISE NOTED
75
3 °C/second maximum(±0.015)
75
25
Temperature (°C)
190 °C
175
8.0
(.315)
60
260 °C peak 40
<1> 245 °C
220 °C
225
150 °C1.4
(0.055)
2.25
(0.089)
80
%
Soldering Profile
8.8
<1> Maximum
of 20 seconds between
(0.347)
175
MANUFACTURER'S
TRADEMARK
100
10.52
(0.414)
15.39
(0.606)
Power Rated %
275
10.4
Profi(0.409)
le
REF.
Power Rated
Soldering
2.4
(0.095)
Derating Curve
4.5
(0.177)
1.6
(0.063)
0.26
(0.10)
2.4
(0.095)
8.0
(.315)
DIMENSIONS:
0.1
398)
7.8
307)
0.26
(0.10)
4.23
(0.166)
MM Recommended Pad Layout
(INCHES)
Typical Part
MM
DIMENSIONS:
±0.38
(INCHES)
11.0
TOLERANCE:
UNLESS OTHERWISE NOTED
(±0.015)
(.433)
±0.38
1.3
TOLERANCE:
UNLESS OTHERWISE
NOTED
RESISTANCE
LEAD
0.102 MAX AT MOUNTING
(±0.015)
(.051)
CODE
4.02
COPLANARITY: (0.004) SURFACE
LEAD
0.102(0.158)
MAX AT MOUNTING
COPLANARITY: (0.004) SURFACE
ns
Temperature (°C)
3.1
(0.122)
1.92
11.0
(.433)
Package
2
Pin Style
Part MarkingS = Surface Mount 263 = D PAK
Ordering Procedure
Pin Style
Power
S = Surface Mount
20 = 20
W
Standard Resistor:
Series,
Resistance
Value, Tolerance,
Power
MODEL
Resistance Value
20 = 20- W
NUMBER
Packaging
T&R
- TR or Tubes
blank
263options
20
<100 ohms ... “R” represents decimal
AP72533RF 200 AP725150RF
150
250
300
TOLERANCEResistance Value
XXXX X%
point (examples: 7R50 =
TimeAP72547RF
(seconds)
DATE CODE
AP725200RF
YYY
MANUFACTURER'S
... “R” represents decimal
100
150
200
250
300
7.5 Ω; <100
R500 ohms
= 0.5 Ω)
TRADEMARK
COUNTRY
COSTA
R
ICA
AP72568RF
AP7251KF
e.g. AP725 8R2
J TR
/ AP725
2R F digits are point (examples: 7R50 =
Time
(seconds)
≥100
ohms
First three
OF ....
ORIGIN
wer dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a
uble-sided
copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm.
0 seconds between Power dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a
260 °C peak
260 °C
double-sided
copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm.
<1>
significant, fourth digit7.5 Ω; R500 = 0.5 Ω)
≥100number
ohms....ofFirst three digits are
represents
significant, fourth digit
zeros to follow (examrepresents number of
ples: 2000 = 200 ohms;
245 °C
3002 = 30K ohms) zeros to follow (examples: 2000 = 200 ohms;
Absolute Tolerance
220 °C
3002 = 30K ohms)
How to Order
J=5%
Absolute Tolerance
190 °C
60 - 90
F
=
1
%
PWR 263 S - 20 - 10R0 F EJ = 5 %
seconds
Packaging
F=1%
Ramp Down
Model
= Tape & Reel
ARCOL UK Limited,
The information Econtained
herein
does not form part of a
6 °C/second
Packaging
PWR = Power
cifications are subject to change without notice.
Blank = Tubes
E = Tape notice.
& Reel ARCOL
Resistorand is subject to change without
Ind. Estate,
contract
tomers shouldThreemilestone
verify actual device performance
in their specific applications.
Specifications are subject to change without notice.
Blank = Tubes
Package operate a policy of continual product development, therefore,
60 - 120 Truro,
seconds
Cornwall,
TR4
9LG,
UK.
Customers
should
verify
actual
device performance in their specific applications.
263 = D2PAK
T +44 (0) 1872
277431
10 seconds
minimum
specifications may change.
Pin Style
S = Surface Mount
F +44 (0) 1872 222002
Ramp Up
E [email protected]
3 °C/second maximum
www.arcolresistors.com
150
200
250
100
Power It is the responsibility of the customer to ensure that the
20 = 20 W
component selected from our range is suitable for the intended
300
Time (seconds)
8 W at an ambient temperature of 25 ˚C when mounted on a
oard using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm.
Resistance Value
If in doubt
please ask ARCOL.
<100 application.
ohms ... “R” represents
decimal
point (examples: 7R50 =
7.5 Ω; R500 = 0.5 Ω)
Page
2 ofohms
2 .... First three digits are
≥100
significant, fourth digit
represents number of
zeros to follow (examples: 2000 = 200 ohms;
3002 = 30K ohms)
Absolute Tolerance
J=5%
F=1%
2/14.05
Similar pages