EIM4853-5 4.8-5.3 GHz Multi-Stage Power Amplifier FEATURES • • • • • 4.8-5.3GHz Operating Frequency Range 36.5dBm Output Power at 1dB Compression 27.0 dB Typical Power Gain @1dB gain compression -45.0Bc Typical OIM3@ each tone Pout 24dBm Non-Hermetic Metal Flange Package Excelics EIM4853-5 APPLICATIONS • • Point-to-point and point-to-multipoint radio Military Radar Systems Caution! ESD sensitive device. ELECTRICAL CHARACTERISTICS (Tb = 25 °C, 50 ohm, VD1=7V, VD2=10V, Vgg=-5V) SYMBOL PARAMETER/TEST CONDITIONS MIN TYP MAX UNITS 5.3 GHz Operating Frequency Range 4.8 P1dB Output Power at 1dB Gain Compression 35.5 36.5 dBm G1dB Gain @1dB gain compression 24 27 dB Output 3 Order Intermodulation Distortion @∆f=10MHz, Each Tone Pout 24dBm -45 dBc Input Return Loss -12 -10 dB Output Return Loss -15 -10 dB F rd OIMD3 Input RL Output RL VD1 Drain Supply Voltage 1 7 V VD2 Drain Supply Voltage 2 10 V IDQ1 Quiescent Drain Current 1 800 mA IDQ2 Quiescent Drain Current 2 1600 mA Vgg Gate Supply Voltage -5 V Rth Thermal Resistance 3.5 ∆Tch Channel Temperature Rise o C/W 80 ºC Note: Turn on/off sequence is required: ---to turn on: apply -5V on both Vgg first, then +7V and +10V. ---to turn off: turn +7V and +10V off first, then turn -5V off Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com Page 1 of 3 Revision 01 EIM4853-5 4.8-5.3 GHz Multi-Stage Power Amplifier MAXIMUM RATINGS @Tb=25°C SYMBOL 1 CHARACTERISTIC 2 ABSOLUTE OPERATING VD1 Drain Supply Voltage 1 11V 8V VD2 Drain Supply Voltage 2 14V 11V Vgg Gate Supply Voltage -8V -6 V Igg Gate Current 150mA 50 mA PIN Input Power 20dBm @ 3dB compression TCH Channel Temperature 175°C 165°C TSTG Storage Temperature -65/175°C -65/175°C 29.8W 25W PT Total Power Dissipation Notes: 1. Operating the device beyond the absolute maximum rating may cause permanent damage. 2. Operating beyond the operating maximum rating may reduce MTTF of the device. Package Dimension and Pin Assignment Excelics EIM4853-5 Dimensions are in inches * NC: No connection inside the package Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com Page 2 of 3 Revision 01 EIM4853-5 4.8-5.3 GHz Multi-Stage Power Amplifier DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com Page 3 of 3 Revision 01