Aluminum Electrolytic Capacitors/ HC Long life Surface Mount Type Series: HC Type: HC 앖 V HB ■ Features ● Life time: 3000 h to 5000 h at 105 °C ● Vibration-proof product is available upon request. (φ8 mm and larger) ● RoHS directive compliant ■ Specifications Category Temp. Range –40 °C to +105 °C Rated W.V. Range 6.3 V.DC to 50 V.DC Nominal Cap. Range 0.1 µF to 1000 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) DC Leakage Current tan δ Please see the attached standard products list After applying rated working voltage for +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. φ4 to φ6.3 (3000 hours After applying rated working voltage) φ8 to φ10 (5000 hours After applying rated working voltage) Endurance Capacitance change ±30 % of initially measured value tan δ < 300 % of initially specified values DC leakage current < initially specified values After storage for 1000 hours at +105 °C ±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) Shelf life Resistance to Soldering Heat Capacitance change ±10 % of initially measured values tan δ < initially specified values DC leakage current < initially specified values ■ Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 ■ Marking ■ Dimensions in mm (not to scale) (Unit : mm) A±0.2 (P) + L Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark (I) Capacitance (µF) 22 j HC B±0.2 Negative polarity marking (–) H φD±0.5 – (I) 0.3 max. K Example:6.3 V 22 µF Marking color : BLACK W Pressure Relief (φ10 and larger) ( ) Reference size Lot number Rated Voltage Mark j A C 6.3 V 10 V 16 V E V H 25 V 35 V 50 V Size D code B 4.0 C 5.0 D 6.3 D8 6.3 F 8.0 G 10.0 L A, B H I W P K 5.8±0.3 5.8±0.3 5.8±0.3 7.7±0.3 10.2±0.3 10.2±0.3 4.3 5.3 6.6 6.6 8.3 10.3 5.5 max. 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-27 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ HC ■ Standard Products Endurance : 105 °C 3000 h (φ8, φ10 : 5000 h) Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (±20 %) (µF) 22 47 100 220 330 1000 33 220 10 22 47 100 470 33 47 100 330 4.7 10 22 33 220 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 Dia. Length (mm) 4 5 6.3 6.3 8 10 5 8 4 5 6.3 6.3 10 6.3 6.3 8 10 4 5 6.3 6.3 10 4 4 4 4 4 4 4 5 6.3 6.3 8 8 10 (mm) 5.8 5.8 5.8 7.7 10.2 10.2 5.8 10.2 5.8 5.8 5.8 7.7 10.2 5.8 7.7 10.2 10.2 5.8 5.8 5.8 7.7 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 7.7 10.2 10.2 10.2 Min. Packaging Q'ty Specification Size Code B C D D8 F G C F B C D D8 G D D8 F G B C D D8 G B B B B B B B C D D8 F F G Ripple tan δ Current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 26 0.30 46 0.30 71 0.30 101 0.30 230 0.30 313 0.50 43 0.26 160 0.26 28 0.20 39 0.20 70 0.20 81 0.20 340 0.20 65 0.16 65 0.16 130 0.16 238 0.16 15 0.14 28 0.14 55 0.14 57 0.14 220 0.14 1 0.12 2.6 0.12 3.2 0.12 5 0.12 10 0.12 16 0.12 16 0.12 23 0.12 35 0.12 49 0.12 91 0.12 100 0.12 160 0.12 Part No. (RoHS:compliant) EEEHC0J220R EEEHC0J470R EEEHC0J101P EEEHC0J221XP EEEHC0J331P EEEHC0J102P EEEHC1A330R EEEHC1A221P EEEHC1C100R EEEHC1C220R EEEHC1C470P EEEHC1C101XP EEEHC1C471P EEEHC1E330P EEEHC1E470XP EEEHC1E101P EEEHC1E331P EEEHC1V4R7R EEEHC1V100R EEEHC1V220P EEEHC1V330XP EEEHC1V221P EEEHC1HR10R EEEHC1HR22R EEEHC1HR33R EEEHC1HR47R EEEHC1H1R0R EEEHC1H2R2R EEEHC1H3R3R EEEHC1H4R7R EEEHC1H100P EEEHC1H220XP EEEHC1H330P EEEHC1H470P EEEHC1H101P Reflow (1) (1) (1) (1) (2) (2) (1) (2) (1) (1) (1) (1) (2) (1) (1) (2) (2) (1) (1) (1) (1) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) Taping (pcs) 2000 1000 1000 900 500 500 1000 500 2000 1000 1000 900 500 1000 900 500 500 2000 1000 1000 900 500 2000 2000 2000 2000 2000 2000 2000 1000 1000 900 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-28 – 00 Nov. 2012