7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. P LTR DESCRIPTION DATE DWN APVD B REV PER ECO-10-013207 23JUN2010 RG DO C REV PER ECO-11-004536 04MAR2011 RG DO D REV PER ECO-15-018490 28DEC2015 RS SZ 29.00 1 D 2 5 7.60 HOUSING 2X n 6.80 TARGET ZONE 3 MATERIALS: HOUSING: POLYESTER PBT THERMOPLASTIC, UL 94 V-O CONTACT: COPPER ALLOY CONTACT INTERFACE: COPPER ALLOY INSERT: COPPER ALLOY FINISH: HOUSING: BLACK CONTACT: SILVER PLATE, 5.08µm MIN THICK, OVER NICKEL UNDERPLATE CONTACT INTERFACE: GOLD PLATE, 0.76µm MIN THICK, OVER NICKEL UNDERPLATE INSERT: NICKEL PLATE RECOMMENDED M3 SCREW LENGTH PCB THICKNESS SCREW LGTH. 2.36mm [0.093"] 4.00mm 1.57mm [0.062"] 3.00mm 3.18mm [0.125"] 10.00 C 5 PART NUMBER AND DATE CODE LABEL TO BE LOCATED APPROXIMATELY AS SHOWN. 6 MANUFACTURING TOLERANCE: FINISHED HOLE: n 2.59 # 0.05 DRILLED HOLE n 2.687 # 0.020 COPPER PLATING: 0.050 - 0.025 TIN-LEAD PLATING: 0.015 - 0.004 7 THREADED INSERT & LOWER CONTACT MAY BE ELECTRICALLY COMMON. 5.20 2X 5.52 1.40 5.00mm 4. THIS PRODUCT HAS NOT BEEN VALIDATION TESTED. 19.50 CONTACT INTERFACE D C 0.50 CONTACTS 3 B THREADED INSERT M3 X 0.5 B 7 8.0 14.0 ( 15.50 ) 2085181-1 PRODUCT NUMBER A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL 0.5 0.35 - FINISH 1 4805 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 2 DWN 10MAR2009 CHK 10MAR2009 APVD 10MAR2009 G.PETERS D.DEFIBAUGH D.DEFIBAUGH TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC 1 $ - WEIGHT SIZE - CUSTOMER DRAWING A 2 POSITION, RIGHT ANGLE, 3.17mm DIAMETER, SOCKET ASSEMBLY CAGE CODE A1 00779 DRAWING NO 2085181 SCALE 1:1 RESTRICTED TO SHEET 1 OF - 2 REV D 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D D 14.00 8.00 EDGE OF PCB 0.20 0.20 4.00 CONNECTOR PROFILE C ISOMETRIC FRONT VIEW C BACKPLANE TOP SURFACE 7.60 3.80 7.50 12.50 B 3.80 2X ( n 2.59 ) 6 B 0.05 RECOMMENDED PRINTED CIRCUIT BOARD LAYOUT (AS VIEWED FROM COMPONENT SIDE) MINIMUM PCB THICKNESS 1.57 ISOMETRIC BOTTOM VIEW 3 P/N: 2085181-1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES 0.5 0.35 - FINISH 1 4805 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 2 DWN 10MAR2009 CHK 10MAR2009 APVD 10MAR2009 G.PETERS D.DEFIBAUGH D.DEFIBAUGH TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC 1 $ - WEIGHT SIZE - CUSTOMER DRAWING 2 POSITION, RIGHT ANGLE, 3.17mm DIAMETER, SOCKET ASSEMBLY CAGE CODE A1 00779 DRAWING NO 2085181 SCALE 1:1 RESTRICTED TO SHEET 2 OF - 2 REV D