ASM40 40W U l t r a m i n i a ture Medi c al Open Fram e Switch in g Po we r Su p p lie s series Up to 40W Output Power Universal 90-264VAC Input Single and Dual Outputs from 5VDC to 48VDC High Efficiency up to 86% 4000VAC Isolation 1U Compatible Height 2”W x 4”L x 1.244”H Model Number Output Voltage Max. O/P Amps Min. O/P Amps Efficiency @ 230VAC R&N P-P SINGLE OUTPUT ASM40-5(A)* ASM40-9(A)* ASM40-12(A)* ASM40-15(A)* ASM40-24(A)* ASM40-36(A)* ASM40-48(A)* 5VDC 9VDC 12VDC 15VDC 24VDC 36VDC 48VDC 8 4.44 3.33 2.66 1.66 1.11 0.83 0 0 0 0 0 0 0 77% 82% 84% 84% 86% 85% 86% 300mV 250mV 250mV 250mV 250mV 250mV 250mV DUAL OUTPUT ASM40D-1 ASM40D-2 ASM40D-3 ASM40D-5 (V1/V2) 5/12VDC 5/15VDC 5/24VDC 5/48VDC (I1/I2) 3.3/2 3.3/1.6 3.3/1 3.3/0.50 0.66/0.40 0.66/0.32 0.66/0.20 0.66/0.10 78% 82% 82% 83% 100/120mV 100/150mV 100/240mV 100/400mV *Note: The Single Outputs can be ordered with Molex 09-65-20xx, 5273 series I/O connectors.. Simply add the suffix “A” to the end of the Model Number. For example, ASM40-5A WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASM40 40W U l t r a m i n i a ture Medi c al Open Fram e Switch in g Po we r Su p p lie s INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: Leakage Current series GENERAL SPECIFICATIONS 90-264 VAC (115-240VAC nom.) 47-63 Hz 30A @ 115VAC Input * 60A @ 230VAC Input * BF <100uA @ 240VAC, 50Hz OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation (20%-FL) Single O/P: ± 1% Dual O/P (V1/V2): ± 3/5% max Line Regulation (LL-HL) Single O/P: ± 1% max Dual O/P (V1/V2): ± 1/2% max Cross Regulation (Dual Outputs) (100-20% L w. other O/P at 60%) ± 5/7% max Preset Accuracy Single Output: 1% max. Dual Outputs (V1/V2): +7/-9% max. DC Voltage Adjust (typ) ± 6% of FS (Primary) Temperature Coefficient ± 0.05%/°C Ripple/Noise, 20Mhz BW See Selection Chart Measured by paralleling 47uF/EC and 0.1uF ceramic capacitors on the output at a 20MHz band-width Over Voltage Protection Latching, 130% typ, re-power Over Power Protection 210% +20/-10% nom. I/P range; self-recovering * Short Circuit Protection Continuous, self-recovering * Hold Up Time (115V / 60Hz) 10 mS, min. Isolation Input-Output: Input-GND: Output-GND: Efficiency , typ Switching Frequency Safety UL/cUL: UL-EU: CB: CE: 4000VAC 1500VAC 500VAC See Selection Chart 65Khz, (fixed, typical) ANSI/AAMI ES60601-1 3rd ed. CSA C22.2 No. 60601-1 3rd ed. EN60601-1 3rd ed. IEC60601-1 3rd ed. EN60601-1-2 PHYSICAL SPECIFICATIONS Size Construction Weight 2” x 4” x 1.244” 50.8 x 101.6 x 31.6mm Open Frame 5.61oz (159g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity EMI MTBF (Mil Std 217, 25°C) -20 to +50°C(FL) , See Derate -40 to +85°C * 0 to + 95%, non-cond * EN55011 Class B 185,000 Hrs OUTPUT DERATING CURVE 100 90 80 All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Load (%) 70 60 50 40 30 20 10 0 -20 10 20 30 40 50 60 70 Ambient Temperature DegC WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASM40 40W U l t r a m i n i a ture Medi c al Open Fram e Switch in g Po we r Su p p lie s series MECHANICAL DIMENSIONS WITH JST CONNECTORS - STANDARD All 4 corner holes need to be bonded accordingly to the end product PE (Protective Earth) path. 4.00in 101.6mm 3.70in 94mm .15in 3.8mm 2.00in 50.8mm .125in 4_ 3.17mm 3 4 5 6 1.70in 43.2mm ACL 1 ACN 2 +V2out GND GND +V1out .15in 3.8mm 1.17in 29.6mm max C .08in 2mm Length 、Width tolerance : DRAWING NO. Single Outputs 1 2 3 4 5 6 AC Line AC Neutral + Output GND GND + Output C .063in 1.6mm 0.1mm (0.004in) ASM60W_C Pin # REV Input connector : JST/VH series or equivalent Output connector : JST/VH series or equivalent UNIT SHEET METAL TOLERANCE Dual Outputs DESCRIPTION Height changes AC Line AC Neutral + Output 2 GND GND + Output 1 WWW.ASTRODYNETDI.COM SIZE mm A4 MATERIAL (UNLESS OTHERWISE SPECIFIED) PART NO. Connectors and Mating Connectors 1:1 SCALE ANGULAR PIERCINGBENDING DIMENSION Input Connector: JST B3P-VH or Molex 41791 Series (3 Position) MODEL NO. 2012/05/24 SHEET OF ±0.1 JST±0.15 X<8Connector: ±0.3° Input Mating VHR-3N or Molex 41695 Series (3 Position)TITLE 2D ±0.5° Projection ±0.1 ±0.2 8<X<25 Output Connector: JST B4P-VH or Molex 41791 DRAWN Series (4 Position) ±0.5° ±0.25 ±0.15 Erica 25<X<100 Output Mating Connector: JST VHR-4N±1° or MolexCHECKED 41695 Series (4 Position) ±0.2 ±0.3 100<X<300 DATE 300<X<800 ±0.3 ±0.5 ±1.5° APPROVED Use with JST # SVH-21T-P1.1 or Molex 2478 Series Crimp Terminals ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASM40 40W U l t r a m i n i a ture Medi c al Open Fram e Switch in g Po we r Su p p lie s series MECHANICAL DIMENSIONS WITH MOLEX CONNECTORS (“A” VERSIONS SINGLE OUTPUTS ONLY) All 4 corner holes need to be bonded accordingly to the end product PE (Protective Earth) path. 4.00in 101.6mm 3.70in 94mm .15in 3.8mm 2.00in 1.70in 50.8mm 43.2mm .125in 4_ 3.17mm 3 4 5 6 ACL 1 ACN 2 +Vout +Vout GND GND .15in 3.8mm 1.17in 29.6mm max C .08in 2mm Length 、Width tolerance : C .06in 1.6mm 0.1mm (0.004in) ASM60-A_C DRAWING NO. REV Input connector : Molex 5273 series or equivalent Output connector : Molex 5273 series or equivalent Pin # Single Outputs 1 2 3 4 5 6 AC Line AC Neutral + Output + Output GND GND DESCRIPTION Height changes WWW.ASTRODYNETDI.COM UNIT SHEET METAL TOLERANCE SIZE mm A4 MATERIAL (UNLESS OTHERWISE SPECIFIED) PART NO. Connectors and Mating Connectors 1:1 SCALE ANGULAR PIERCINGBENDING DIMENSION Connector: JST B3P-VH or Molex 5273 Series (3 Position) 2012/05/25Input MODEL NO. SHEET OF ±0.1 JST ±0.15 X<8 Connector: Input Mating VHR-3N±0.3° or Molex 3069 Series (3 Position)TITLE 2D ±0.5° Projection ±0.1 ±0.2 8<X<25 Output Connector: JST B4P-VH or Molex 5273 DRAWN Series (4 Position) ±0.5° Erica ±0.25 ±0.15 25<X<100 Output Mating Connector: JST VHR-4N or Molex 3069 Series (4 Position) ±0.2 ±1° CHECKED ±0.3 100<X<300 DATE 300<X<800 ±0.3 ±0.5 ±1.5° APPROVED Use with JST # SVH-21T-P1.1 or Molex 2478 Series Crimp Terminals 1715 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458