Data Sheet January 1999 D371-Type Digital Uncooled DFB Laser Module Applications ■ Long-reach SONET OC-3/OC-12 systems ■ Telecommunications ■ Secure digital data systems Benefits The low-profile D371-Type Laser Module is ideally suited for short- and long-haul SONET and other high-speed digital applications. Features ■ Eight-pin package suitable for SONET applications ■ Narrow linewidth, distributed-feedback, multiquantum-well (DFB-MQW)1.3 µm laser with singlemode fiber pigtail ■ Wide operating temperature range: –40 °C to +85 °C ■ No TEC required ■ High output power: typical 2.0 mW peak power coupled into single-mode fiber ■ Hermetically sealed active components ■ Internal back-facet monitor ■ Qualification program: Telcordia Technologies * TA-983 * Telcordia Technologies is a registered trademark of Telcordia Technologies, Inc. ■ Easily board mounted ■ Requires no lead bending ■ No additional heat sinks required ■ Pin compatible with industry-standard, 14-pin laser module ■ Highly efficient DFB-MQW laser structure allows for lower threshold and drive currents, and reduced power consumption Description The D371-Type Uncooled Laser Module consists of a laser diode coupled to a single-mode fiber pigtail. The device is available in a standard, 8-pin configuration (see Figure 1 and/or Table 1) and is ideal for long-reach (SONET) and other high-speed digital applications. The laser diode is a narrow linewidth (<1 nm) DFBMQW single-mode laser and an InGaAs PIN photodiode back-facet monitor in an epoxy-free, hermetically sealed package. Data Sheet January 1999 D371-Type Digital Uncooled DFB Laser Module Description (continued) Table 1. Pin Descriptions The device characteristics listed in this document are met at 2.0 mW output power. Higher- or lower-power operation is possible. Under conditions of a fixed photodiode current, the change in optical output is typically ±0.5 dB over an operating temperature range of –40 °C to +85 °C. Pin Number Connection 1 2 3 4 5 6 7 8 NC/reserved Case ground NC/reserved Photodiode cathode Photodiode anode Laser diode cathode Laser diode anode NC/reserved This device incorporates the new Laser 2000 manufacturing process developed by the Optoelectronic unit of Agere Systems Inc. Laser 2000 is a low-cost platform that targets high-volume manufacturing and tighter product distributions on all optical subassemblies. The platform incorporates an advanced optical design that is produced on a highly automated production line. The Laser 2000 platform is qualified for the central office and uncontrolled environments, and can be used for applications requiring high performance and low cost. 4 3 2 1 5 6 7 8 1-900 (C) Figure 1. D371-Type Digital Uncooled DFB Laser Module Schematic, Top View Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Maximum Peak Laser Drive Current or Maximum Fiber Power* Peak Reverse Laser Voltage: Laser Monitor Monitor Forward Current Operating Case Temperature Range Storage Case Temperature Range Lead Soldering Temperature/Time Relative Humidity (noncondensing) Symbol Min Max Unit IOP PMAX — — 150 10 mA mW VRL VRD IFD TC Tstg — RH — — — –40 –40 — — 2 20 2 85 85 260/10 85 V V mA °C °C °C/s % * Rating varies with temperature. 2 Agere Systems Inc. Data Sheet January 1999 D371-Type Digital Uncooled DFB Laser Module Handling Precautions Caution: This device is susceptible to damage as a result of electrostatic discharge (ESD). Take proper precautions during both handling and testing. Follow guidelines such as JEDEC Publication No. 108A (Dec. 1988). Although protection circuitry is designed into the device, take proper precautions to avoid exposure to ESD. Electro/Optical Characteristics Table 2. Electro/Optical Characteristics (over operating temperature range unless otherwise noted) Parameter Operating Temperature Range Optical Output Power* Threshold Current Modulation Current Slope Efficiency† Center Wavelength Spectral Width (–20 dB) Side-mode Suppression Ratio Tracking Error Spontaneous Emission Rise/Fall Times Forward Voltage Input Impedance Monitor Current Monitor Dark Current Wavelength Temperature Coefficient Symbol Test Conditions Min Typ Max Unit T — –40 — 85 °C PF ITH CW, nominal T = 25 °C T = full range CW, PF = 2.0 mW, T = 25 °C CW, IMON = const. T = full range CW, PF = 2.0 mW, T = 25 °C PF = 2.0 mW, CW PF = 2.0 mW, 622 Mbits/s CW, PF = 2.0 mW — 4 2 10 7.5 67 1280 — 30 2 11 — 20 — — — — 40 — 15 50 30 55 200 1335 1 — mW mA mA mA µW/mA nm nm dB IMON = constant, CW I = (0.9) ITH 10%—90% pulse T = 25 °C CW — VR‡ = 5 V VR‡ = 5 V — — — — 0.5 — 0.25 — 50 0.5 dB µW ns — 3 50 — — 1.1 — — 10 0.09 1.6 8 1000 200 0.1 V Ω µA nA nm/°C IMOD SE λC ∆λ SMSR TE PTH tR, tF VF R IMON ID — * 1 mW power option also available. See Table 4 for more information. † The slope efficiency is used to calculate the modulation current for a desired output power. This modulation current plus the threshold current comprise the total operating current for the device. ‡ VR = reverse voltage. Agere Systems Inc. 3 Data Sheet January 1999 D371-Type Digital Uncooled DFB Laser Module Outline Diagram Dimensions are in inches and (millimeters). TRADEMARK, CODE, LASER SERIAL NUMBER, AND/OR DATE CODE IN APPROXIMATE AREA SHOWN 4 3 2 1 5 6 7 8 1.06 (27.0) MIN 39.37 (1000) MIN PIGTAIL LENGTH 0.52 (13.2) 0.29 (7.37) 0.045 (1.143) 0.20 (5.00) 0.165 (4.20) 0.016 (0.410) 0.110 (2.79) 0.100 (2.54) 0.300 (7.62) 0.010 (0.254) 0.085 (2.16) 0.17 (4.32) 1 0.30 (7.62) 1-899 (C).f 4 Agere Systems Inc. Data Sheet January 1999 D371-Type Digital Uncooled DFB Laser Module Qualification Information The D371-Type Laser Module has completed and passed the following qualification tests and meets the intent of Bellcore TR-NWT-000468 for interoffice environments and TA-TSY-000983 for outside plant environments. Table 3. D371-Type Laser Module Qualification Test Plan Qualification Test Conditions Sample Size Reference Mechanical Shock 500 G for P/F 1,500 G for information 11 MIL-STD-883 Method 2002 Vibration 20 g, 20 Hz—2,000 Hz 11 MIL-STD-883 Method 2007 — 11 MIL-STD-883 Method 2007 Delta T = 100 °C 11 MIL-STD-883 Method 2003 1 kg; 3 times for P/F 2 kg; 3 times for information 11 Telcordia Technologies 983 85 °C, 5,000 hrs. 25 Telcordia Technologies 983 Section 5.18 1,000 hrs. for provisional qual. 2,000 hrs. for P/F 5,000 hrs. for information 11 Telcordia Technologies 983 500 cycles for P/F 1,000 cycles for information 11 Telcordia Technologies 983 Section 5.20 10 cycles for P/F 20 cycles for information 11 Telcordia Technologies 983 Section 5.23 40 °C, 95% RH 1,000 hrs. for provisional qual. 1,344 hrs. for P/F 11 MIL-STD-202 Method 103 <5,000 ppm water vapor 11 MIL-STD-883 Method 1018 Flammability — — TR357 Sec. 4.4.2.5 ESD Threshold — 6 Telcordia Technologies 983 Section 5.22 Solderability Thermal Shock Fiber Pull Accelerated (Biased) Aging 85 °C Storage Temperature Cycling Cyclic Moisture Resistance Damp Heat Internal Moisture Agere Systems Inc. 5 Data Sheet January 1999 D371-Type Digital Uncooled DFB Laser Module Laser Safety Information Class IIIb Laser Product FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser Safety requirements. All versions are Class 3B laser products per IEC * 60825-1:1993. The device has been classified with the FDA under accession number 8720010. This product complies with 21 CFR 1040.10 and 1040.11. 8.3 µm single-mode pigtail with optional connector. Wavelength = 1.3 µm. Maximum power = 10 mW. Because of size constraints, laser safety labeling is not affixed to the module but attached to the outside of the shipping carton. Product is not shipped with power supply. Caution: Use of controls, adjustments, and procedures other than those specified herein may result in hazardous laser radiation exposure. DANGER INVISIBLE LASER RADIATION IS EMITTED FROM THE END OF FIBER OR CONNECTOR Avoid direct exposure to beam Do not view beam directly with optical instruments INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR Avoid exposure to beam Class 3B Laser Product IEC-60825M 1993 Max. Output: 10 mW Wavelength: 1.3 µm * IEC is a registered trademark of The International Electrotechnical Commission. 6 Agere Systems Inc. Data Sheet January 1999 D371-Type Digital Uncooled DFB Laser Module Ordering Information Table 4. Ordering Information Device Code Comcode Operating Case Temperature Range (°C) Pfiber Connector D371-10A D371-20A D371-22A D371-20B D371-10F D371-20F D371-22F D371-10N D371-20N D371-22N 107950941 107950958 108286527 108225376 107950982 107950990 108286535 107951006 107951014 108288382 –40 to +85 –40 to +85 0 to 65 –40 to +85 –40 to +85 –40 to +85 0 to 65 –40 to +85 –40 to +85 0 to 65 1.0 mW 2.0 mW 2.0 mW 2.0 mW 1.0 mW 2.0 mW 2.0 mW 1.0 mW 2.0 mW 2.0 mW SC-PC SC-PC SC-PC SC-APC FC-PC FC-PC FC-PC none none none Agere Systems Inc. 7 D371-Type Digital Uncooled DFB Laser Module Data Sheet January 1999 For additional information, contact your Agere Systems Account Manager or the following: INTERNET: http://www.agere.com E-MAIL: [email protected] N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286 1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106) ASIA PACIFIC: Agere Systems Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256 Tel. (65) 778 8833, FAX (65) 777 7495 CHINA: Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 200121 PRC Tel. (86) 21 50471212, FAX (86) 21 50472266 JAPAN: Agere Systems Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700 EUROPE: Data Requests: DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148 Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK) Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. Copyright © 2001 Agere Systems Inc. All Rights Reserved January 1999 DS99-022LWP (Replaces DS98-283LWP)