BZW04P-5V8 THRU BZW04-376 TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.8 to 376 Volts Peak Pulse Power - 400 Watts FEATURES DO204AL 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junction ♦ 400W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0 ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bi-directional types ♦ Typical ID less than 1µA above 10V rating ♦ High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension 0.034 (0.86) 0.028 (0.71) DIA. MECHANICAL DATA NOTE: Lead diameter is 0.026 (0.66) 0.023 (0.58) for suffix "E" part numbers Dimensions are in inches and (millimeters) Case: JEDEC DO-204AL molded plastic over passivated junction Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: For unidirectional types the color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.012 ounce, 0.3 gram DEVICES FOR BIDIRECTIONAL APPLICATIONS For bi-directional use add suffix Letter "B" (e.g. BZW04P-6V4B). Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1, FIG. 1) Peak pulse current with a 10/1000µs waveform (NOTE 1) Steady state power dissipation at TL=75°C lead lengths, 0.375” (9.5mm) (NOTE 2) Peak forward surge current, 8.3ms single half Sine-wave superimposed on rated load (JEDEC Method) (NOTE 3) unidirectional only Maximum instantaneous forward voltage at 25A uni-directional only (NOTE 4) Operating junction and storage temperature range NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2 (2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5 (3) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum (4) VF=3.5V max. for devices of V(BR)≤220V and VF=5.0 Volt max. for devices of V(BR)>220V 1/5/98 SYMBOL VALUE UNITS PPPM Minimum 400 Watts IPPM SEE TABLE 1 Amps PM(AV) 1.0 Watts IFSM 40.0 Amps VF 3.5/5.0 Volts TJ, TSTG -55 to +175 °C ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 Breakdown Voltage V(BR) Volts (NOTE 1) Device Type MIN MAX Test Current at IT (mA) BZW04P5V8 BZW04-5V8 BZW04P6V4 BZW04-6V4 BZW04P7V0 BZW04-7V0 BZW04P7V8 BZW04-7V8 BZW04P8V5 BZW04-8V5 BZW04P9V4 BZW04-9V4 BZW0P10 BZW04-10 BZW04P11 BZW04-11 BZW04P13 BZW04-13 BZW04P14 BZW04-14 BZW04P15 BZW04-15 BZW04P17 BZW04-17 BZW04P19 BZW04-19 BZW04P20 BZW04-20 BZW04P23 BZW04-23 BZW04P26 BZW04-26 BZW04P28 BZW04-28 BZW04P31 BZW04-31 BZW04P33 BZW04-33 BZW04P37 BZW04-37 BZW04P40 BZW04-40 BZW04P44 BZW04-44 BZW04P48 BZW04-48 6.45 6.45 7.13 7.13 7.79 7.79 8.65 8.65 9.50 9.50 10.5 10.5 11.4 11.4 12.4 12.4 14.3 14.3 15.2 15.2 17.1 17.1 19.0 19.0 20.9 20.9 22.8 22.8 25.7 25.7 28.5 28.5 31.4 31.4 34.2 34.2 37.1 37.1 40.9 40.9 44.7 44.7 48.5 48.5 53.2 53.2 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (µA) Maximum Peak Pulse Current IPPM (Amps) (NOTE 2) Maximum Clamping Voltage at IPPM VC (Volts) 38.0 38.0 35.4 35.4 33.0 33.0 30.0 30.0 27.6 27.6 25.7 25.7 24.0 24.0 22.0 22.0 19.0 19.0 17.8 17.8 16.0 16.0 14.5 14.5 13.0 13.0 12.0 12.0 10.7 10.7 9.6 9.6 8.8 8.8 8.0 8.0 7.4 7.4 6.7 6.7 6.2 6.2 5.7 5.7 5.2 5.2 10.5 10.5 11.3 11.3 12.1 12.1 13.4 13.4 14.5 14.5 15.6 15.6 16.7 16.7 18.2 18.2 21.2 21.2 22.5 22.5 25.2 25.2 27.7 27.7 30.6 30.6 33.2 33.2 37.5 37.5 41.5 41.5 45.7 45.7 49.9 49.9 53.9 53.9 59.3 59.3 64.8 64.8 70.1 70.1 77.0 77.0 Maximum Temperature Coefficient of V(BR) (% / C) (NOTE4) 5.80 5.80 6.40 6.40 7.02 7.02 7.78 7.78 8.55 8.55 9.4 9.4 10.2 10.2 11.1 11.1 12.8 12.8 13.6 13.6 15.3 15.3 17.1 17.1 18.8 18.8 20.5 20.5 23.1 23.1 25.6 25.6 28.2 28.2 30.8 30.8 33.3 33.3 36.8 36.8 40.2 40.2 43.6 43.6 47.8 47.8 1000 1000 500 500 200 200 50.0 50.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.073 0.073 0.075 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 (Cont’d) Breakdown Voltage V(BR) Volts (NOTE 1) Device Type MIN MAX BZW04P53 BZW04-53 BZW04P58 BZW04-58 BZW04P64 BZW04-64 BZW04P70 BZW04-70 BZW04P78 BZW04-78 BZW04P85 BZW04-85 BZW04P94 BZW04-94 BZW04P102 BZW04-102 BZW04P110 BZW04-110 BZW04P128 BZW04-128 BZW04P136 BZW404-136 BZW04P145 BZW04-145 BZW04P154 BZW04-154 BZW04P171 BZW04-171 BZW04P188 BZW04-188 BZW04P213 BZW04-213 BZW04P239 BZW04-239 BZW04P256 BZW04-256 BZW04P273 BZW04-273 BZW04P299 BZW04-299 BZW04P342 BZW04-342 BZW04P376 BZW04-376 58.9 58.9 64.6 64.6 71.3 71.3 77.9 77.9 86.5 86.5 95.0 95.0 105 105 114 114 124 124 143 143 152 152 161 161 171 171 190 190 209 209 237 237 266 266 285 285 304 304 332 332 380 380 418 418 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 308 294 330 315 352 336 385 368 440 420 484 462 Test Current at IT (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (µA) Maximum Peak Pulse Current IPPM (Amps) (NOTE 2) Maximum Clamping Voltage at IPPM VC (Volts) 4.7 4.7 4.3 4.3 3.9 3.9 3.5 3.5 3.2 3.2 2.9 2.9 2.6 2.6 2.4 2.4 2.2 2.2 2.0 2.0 1.8 1.8 1.7 1.7 1.6 1.6 1.5 1.5 1.4 1.4 1.5 1.5 1.5 1.5 1.2 1.2 1.2 1.2 0.90 0.90 0.90 0.90 0.80 0.80 85.0 85.0 92.0 92.0 103 103 113 113 125 125 137 137 152 152 165 165 179 179 207 207 219 219 234 234 246 246 274 274 301 301 344 344 384 384 414 414 438 438 482 482 548 548 603 603 Maximum Temperature Coefficient of V(BR) (% / C) (NOTE4) 53.0 53.0 58.1 58.1 64.1 64.1 70.1 70.1 78.0 78.0 85.5 85.5 94.0 94.0 102 102 111 111 128 128 136 136 145 145 154 154 171 171 188 188 213 213 239 239 256 256 273 273 299 299 342 342 376 376 NOTES: (1) V(BR) measured after IT applied for 300µs IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (4) For bi-directional devices with VWM of 10 Volts and less, the ID limit is doubled 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 RATINGS AND CHARACTERISTIC CURVES BZW04P5V8 THRU BZW04-376 FIG. 2 - PULSE DERATING CURVE PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE, % PPPM, PEAK PULSE POWER, kW FIG. 1 - PEAK PULSE POWER RATING CURVE 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25°C 10 1.0 0.1 0.1µs 10µs 1.0µs 100µs 1.0ms 10ms td, PULSE WIDTH, sec. PEAK VALUE IPPM 25 0 25 0 50 75 100 125 150 175 200 100 FIG. 4 - TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL 100,000 TJ=25°C f=1.0 MHz Vsig=50mVp-p HALF VALUE - IPP 2 10/1000µsec. WAVEFORM AS DEFINED BY R.E.A. 50 CJ, JUNCTION CAPACITANCE, pF PPPM, PEAK PULSE CURRENT, % 50 TA, AMBIENT TEMPERATURE, °C TA=25°C PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP tr=10µsec. 0 td 4.0 3.0 2.0 1.0 0 t, TIME, ms FIG. 5 - STEADY STATE POWER DERATING CURVE 1.00 L 60 HZ RESISTIVE OR INDUCTIVE LOAD 10,000 1000 MEASURED at ZERO BIAS MEASURED at STAND-OFF VOLTAGE, VWM = 0.375”(9.5mm) LEAD LENGTH 0.75 10 0.50 1.0 10 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS 1.6 x 1.6 x 0.040" (40 x 40 x 1mm.) COPPER HEAT SINKS 0.25 0 0 25 50 75 100 125 150 175 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES PM(AV), STEADY STATE POWER DISSIPATION, WATTS 75 FIG. 3 - PULSE WAVEFORM 150 200 TL, LEAD TEMPERATURE,°C FIG. 7-TYPICAL REVERSE LEAKAGE CHARACTERISTICS ID, INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 100 100 MEASURED at DEVICES STAND-OFF VOLTAGE, VWM 10 TA=25°C 1 FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL 50 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=TJ max. 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60 HZ 0.1 0.01 0 100 200 300 400 V(BR), BREAKDOWN VOLTAGE, VOLTS 500 100