CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount PXF ●Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. (ESR and rated ripple current values are improved from PXA series.) ●Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 2,700µF ●Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ●RoHS Compliant ●Halogen Free Lower ESR PXE Lower ESR PXA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) -55 to +105℃ 2.5 to 16Vdc ±20% (M) Rated voltage×1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 105℃) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value DF (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value DF (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value ≦The initial specified value Leakage current The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value DF (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Endurance Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆MARKING ◆DIMENSIONS [mm] ● Terminal Size Code E61 F61 F80 H70 H80 HA0 HC0 J80 JA0 JC0 Code : A P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.3 (Note) A±0.2 (Note) L±0.5 for HA0, HC0, JA0, JC0 φD 5 6.3 6.3 8 8 8 8 10 10 10 B C L A 5.8 5.3 5.3 5.9 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 6.7 8.3 8.3 9.0 7.7 8.3 8.3 9.0 10.0 8.3 8.3 9.0 12.0 8.3 8.3 9.0 7.7 10.3 10.3 11.0 10.0 10.3 10.3 11.0 12.2 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 3.1 3.1 3.1 4.5 4.5 4.5 EX) 2.5V390µF E49A 390 2.5V ◆PART NUMBERING SYSTEM 1 2 3 4 A PXE 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47μF:470,100μF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/2) CAT. No. E1001L CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 Cap (µF) Size code 180 390 470 560 560 680 820 820 1,000 1,200 1,500 1,500 2,200 2,700 100 150 270 330 390 470 560 680 1,000 1,000 1,200 1,200 1,500 1,800 1,800 100 120 220 270 330 330 390 470 820 820 820 1,200 1,500 1,500 47 56 68 120 150 220 270 330 390 470 680 33 39 68 82 100 100 120 150 180 220 220 330 E61 F61 F80 F80 H70 H70 H80 HC0 H80 J80 HA0 HC0 JA0 JC0 E61 E61 F61 F61 F80 H70 H70 H80 HA0 J80 HC0 JA0 JA0 JA0 JC0 E61 E61 F61 F80 F80 H70 H70 H80 HA0 HC0 J80 JA0 JA0 JC0 E61 E61 E61 F61 F80 H70 H70 H80 HA0 J80 JA0 E61 E61 F61 F80 F80 H70 H70 H80 HA0 HA0 J80 JA0 Leakage current (µAmax/after 2min.) ESR (mΩmax/20℃, 100k to 300kHz) 90 .0 195 235 280 280 340 410 410 500 600 750 750 1,100 1,350 80 .0 120 216 264 312 376 448 544 800 800 960 960 1,200 1,440 1,440 126 151 277 340 415 415 491 592 1,030 1,030 1,030 1,510 1,890 1,890 94 .0 112 136 240 300 440 540 660 780 940 1,360 105 124 217 262 320 320 384 480 576 704 704 1,050 21 15 13 13 13 13 12 9 12 13 10 9 10 9 22 22 15 15 14 14 14 13 10 14 9 10 10 10 9 24 24 15 14 14 14 14 13 12 10 14 12 12 10 28 28 28 25 21 21 21 19 17 19 13 35 35 28 24 24 24 24 22 18 18 22 16 Rated ripple current (mArms/105℃, 100kHz) 2,670 3,160 3,600 3,600 4,100 4,100 4,260 5,400 4,260 4,450 5,220 5,400 5,500 5,600 2,610 2,610 3,160 3,160 3,470 3,950 3,950 3,950 5,220 4,300 5,400 5,500 5,500 5,500 5,600 2,500 2,500 3,160 3,470 3,470 3,950 3,950 3,950 4,770 5,150 4,300 5,025 5,025 5,500 2,310 2,310 2,310 2,530 2,880 3,220 3,220 3,390 4,000 3,800 4,820 2,070 2,070 2,390 2,700 2,700 3,010 3,010 3,150 3,890 3,890 3,450 4,350 Part No. APXE2R5ARA181ME61G APXE2R5ARA391MF61G APXE2R5ARA471MF80G APXE2R5ARA561MF80G APXE2R5ARA561MH70G APXE2R5ARA681MH70G APXE2R5ARA821MH80G APXE2R5ARA821MHC0G APXE2R5ARA102MH80G APXE2R5ARA122MJ80G APXE2R5ARA152MHA0G APXE2R5ARA152MHC0G APXE2R5ARA222MJA0G APXE2R5ARA272MJC0G APXE4R0ARA101ME61G APXE4R0ARA151ME61G APXE4R0ARA271MF61G APXE4R0ARA331MF61G APXE4R0ARA391MF80G APXE4R0ARA471MH70G APXE4R0ARA561MH70G APXE4R0ARA681MH80G APXE4R0ARA102MHA0G APXE4R0ARA102MJ80G APXE4R0ARA122MHC0G APXE4R0ARA122MJA0G APXE4R0ARA152MJA0G APXE4R0ARA182MJA0G APXE4R0ARA182MJC0G APXE6R3ARA101ME61G APXE6R3ARA121ME61G APXE6R3ARA221MF61G APXE6R3ARA271MF80G APXE6R3ARA331MF80G APXE6R3ARA331MH70G APXE6R3ARA391MH70G APXE6R3ARA471MH80G APXE6R3ARA821MHA0G APXE6R3ARA821MHC0G APXE6R3ARA821MJ80G APXE6R3ARA122MJA0G APXE6R3ARA152MJA0G APXE6R3ARA152MJC0G APXE100ARA470ME61G APXE100ARA560ME61G APXE100ARA680ME61G APXE100ARA121MF61G APXE100ARA151MF80G APXE100ARA221MH70G APXE100ARA271MH70G APXE100ARA331MH80G APXE100ARA391MHA0G APXE100ARA471MJ80G APXE100ARA681MJA0G APXE160ARA330ME61G APXE160ARA390ME61G APXE160ARA680MF61G APXE160ARA820MF80G APXE160ARA101MF80G APXE160ARA101MH70G APXE160ARA121MH70G APXE160ARA151MH80G APXE160ARA181MHA0G APXE160ARA221MHA0G APXE160ARA221MJ80G APXE160ARA331MJA0G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (2/2) CAT. No. E1001L