Document 917-1 Power Inductors – AGP4233 • • • • AEC-Q200 Grade 1 qualified Designed for high current power supply applications Flat wire windings provide extremely low DC and AC resistance. Shield has solderable tabs for additional mounting stability. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper Shield tabs RoHS compliant bright tin over nickel over stainless steel Weight 135 g Ambient temperature –40°C to +125°C with Irms current Maximum part temperature +165°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +165°C. Tray packaging: –40°C to +80°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 9 parts per tray PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number Inductance1 ±20% (µH) AGP4233-682ME AGP4233-103ME AGP4233-153ME AGP4233-223ME AGP4233-333ME AGP4233-473ME AGP4233-683ME AGP4233-104ME AGP4233-154ME AGP4233-224ME AGP4233-334ME AGP4233-474ME 6.8 10 15 22 33 47 68 100 150 220 330 470 DCR (mOhms)2 SRF typ nom max (MHz) 10% drop 2.80 2.80 2.80 2.80 2.80 2.80 2.80 2.80 2.80 10.5 10.5 10.5 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 11.5 11.5 11.5 21.7 18.8 15.2 12.0 10.0 8.5 6.4 5.2 4.2 5.0 4.1 3.6 92.0 56.0 45.0 32.8 22.5 16.0 10.6 6.88 4.18 6.40 4.20 2.60 Isat (A)3 20% drop 30% drop 97.8 60.0 47.0 35.4 24.7 17.6 12.2 7.80 4.96 7.20 4.70 3.20 101.8 63.0 49.0 36.6 25.8 18.6 13.0 8.36 5.40 7.60 5.00 3.40 Irms (A)4 20°C rise 40°C rise 24 24 24 24 24 24 24 24 24 12.4 12.4 12.4 34 34 34 34 34 34 34 34 34 17.5 17.5 17.5 1. 2. 3. 4. Inductance tested at 100 kHz, 0.1 Vrms on Agilent/HP 4192A. DCR measured on a Keithley 580 micro-ohmmeter or equivalent. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. Temperature rise of the core is usually less than that of the winding. When Irms is greater than Isat, Isat is the more critical specification and Irms is shown in gray type. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 917-1 Revised 12/12/14 Document 917-2 Power Inductors – AGP4233 Series Typical L vs Current Typical L vs Frequency Document 917-2 Revised 12/12/14 Document 917-3 Power Inductors – AGP4233 Series 6.8 – 150 µH 220 – 470 µH AGP4233-XXXME AGP4233-XXXME 1.41 ± 0.04 35,8 ±1,0 1.41 ± 0.04 35,8 ±1,0 XXXX X XXXX X Internal code 1.66 ± 0.04 42,2 ±1,0 Internal code 1.66 ± 0.04 42,2 ±1,0 1.10 max 28,0 1.10 max 28,0 0.059 1,50 0.020 0,50 Cover tabs provided for mounting stability only. 0.246 6,25 0.209 max 5,3 0.150 3,80 0.032 0,82 0.020 0,50 Cover tabs provided for mounting stability only. 0.364 0.364 9,25 9,25 CL CL 0.689 17,5 0.443 11,25 0.364 0.364 9,25 9,25 0.039 1,00 0.266 6,75 Dimensions are in inches mm CL 0.079 2,00 0.443 0.689 11,25 17,5 0.246 6,25 0.209 max 5,3 0.150 3,80 Recommended PC board layout 0.689 17,5 0.156 3,95 CL 0.689 17,5 0.413 10,5 0.039 1,00 0.061 1,54 0.413 10,5 0.156 3,95 0.266 6,75 Dimensions are in inches mm Recommended PC board layout Document 917-3 Revised 12/12/14