F-XMD-1W Series 3KV ISOLATED 1 W UNREGULATED SINGLE OUTPUT DIP8 DC/DC Converter SELECTION GUIDE Input FEATURES ◆ Availabel Inputs:3,5, 12 and 24 VDC ◆ Availabel Outputs:3.3,5, 7.2,9,12,15,18,24 VDC ◆ Other specifications please enquire MODEL SELECTION ① ② ③ ④ ⑤ ⑥ F 05 05 X MD -1W ①Product Series ③Output Voltage ⑤DIP8 Package ②Input Voltage ④Fixed Input ⑥Rated Power DESCRIPTION The F_XMD-1W series are specially Output Isolation (VDC) Max Capacitive Load(µF) Efficiency (%,Typ) 303 3000 220 72 200 3000 220 75 9 111 3000 220 74 3.0-3.6 12 83 3000 220 76 F0315XMD-1W 3.0-3.6 15 66 3000 220 77 F0503XMD-1W 4.5-5.5 3.3 300 3000 220 72 F0505XMD-1W 4.5-5.5 5 200 3000 220 75 F0507XMD-1W 4.5-5.5 7.2 140 3000 220 76 F0509XMD-1W 4.5-5.5 9 110 3000 220 77 F0512XMD-1W 4.5-5.5 12 83 3000 220 78 F0515XMD-1W 4.5-5.5 15 67 3000 220 78 F0518XMD-1W 4.5-5.5 18 56 3000 220 78 F0524XMD-1W 4.5-5.5 24 42 3000 220 78 F1203XMD-1W 10.8-13.2 3.3 300 3000 220 72 F1205XMD-1W 10.8-13.2 5 200 3000 220 75 F1207XMD-1W 10.8-13.2 7.2 140 3000 220 76 F1209XMD-1W 10.8-13.2 9 110 3000 220 77 F1212XMD-1W 10.8-13.2 12 83 3000 220 78 F1215XMD-1W 10.8-13.2 15 67 3000 220 78 F1218XMD-1W 10.8-13.2 18 56 3000 220 78 F1224XMD-1W 10.8-13.2 24 42 3000 220 78 F2403XMD-1W 21.6-26.4 3.3 300 3000 220 72 F2405XMD-1W 21.6-26.4 5 200 3000 220 75 F2407XMD-1W 21.6-26.4 7.2 140 3000 220 76 F2409XMD-1W 21.6-26.4 9 110 3000 220 77 F2412XMD-1W 21.6-26.4 12 83 3000 220 78 F2415XMD-1W 21.6-26.4 15 67 3000 220 78 F2418XMD-1W 21.6-26.4 18 56 3000 220 78 F2424XMD-1W 21.6-26.4 24 42 3000 220 78 Order code (VDC) Voltage (VDC) Current (max.mA) F0303XMD-1W 3.0-3.6 3.3 F0305XMD-1W 3.0-3.6 5 F0309XMD-1W 3.0-3.6 F0312XMD-1W Voltage Input Specifications designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. Parameter Voltage range Filter Test conditions +/- 10 % Capacitors Isolation Specifications These products apply to: Parameter 1) where the voltage of the input power supply is fixed Rated voltage Leakage current (voltage variation ≤±5%); 3000 VDC 1 mA 109Ohm Resistance 2) where isolation is necessary between input and output Test conditions Capacitance 60 pF typ. (isolation voltage ≤3000VDC); 3) where the regulation of the output voltage and the output Output Specifications Parameter ripple noise are demanded. Voltage accuracy Ripple and noise (at 20 MHz BW) MICRODC reserves the copyright http://www.microdc.cn Test conditions +/- 5 %, max. 100 mV p-p, max. Short circuit protection Momentary Line voltage regulation +/- 1,2 % / 1,0 % of Vin Load voltage regulation +/- 8 %, load = 20 ~ 100 % Temperature coefficient +/- 0,02 % / °C Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 F-XMD-1W Series 3KV ISOLATED 1 W UNREGULATED SINGLE OUTPUT DIP8 DC/DC Converter Environmental Specifications Dimensions Parameter Test conditions Operating temperature (ambient) - 40° C to + 85° C Storage temperature - 55 °C to + 125 °C Derating See graph Humidity Up to 90 %, non condensing Cooling Free air convection General Specifications Parameter Test conditions Dimensions DIP 12.7 X 10.16 x 6.85 mm/0.5 x 0.4 x 0.24 inches Weight 1.8g Case material Non conductive black plastic General Specifications Parameter Test conditions Efficiency 75 % to 85 % Switching frequency 80 KHz, typ. Derating Graph and Pinning Specification can be changed without notice. REV:2 / 09.2010 Copyright MICRODC electronics GMBH RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. Microdc Professional Power Module,Inc. Tel:0086-20-86000646 REACH COMPLIANT INFORMATION E-mail:[email protected] Website:http://www.microdc.cn http://www.microdc.cn This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2