DF005S thru DF10S Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere Features Ideal for printed circuit boards Applicable for automative insertion High surge current capability Solder Dip 260 oC, 40 seconds Mechanical Data Case: DFS Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: As marked on body Typical Applications General purpose use in ac-to-dc bridge full wave rectification for SMPS, Lighting Ballaster, Adapter, Battery Charger, Home Appliances, Office Equipment, and Telecommunication applications Maximum Ratings and Electrical Characteristics (TA=25oC unless otherwise noted) Symbols DF005S DBS101 DF01S DBS102 DF02S DBS103 DF04S DBS104 Maximum repetitive peak reverse voltage VRRM 50 100 200 Maximum RMS voltage VRMS 35 70 140 Maximum DC blocking voltage V DC 50 100 200 Maximum average forward output rectified current at TA=40oC (Note 2) IF(AV) 1.0 Amp Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 Amps 2 10 A 2 se c VF 1.1 Volts IR 5.0 500 uA pF Parameter It Rating for fusing (t < 8.3ms) Maximum instantaneous forward voltage drop per leg at 0.5A Maximum DC reverse current at rated DC blocking voltage per leg TA=25oC TA=125oC Typical junction capacitance per leg (Note 1) Typical thermal resistance per leg (Note 2) Operating junction and storage temperature range Notes: DF06S DBS105 DF08S DBS106 DF10S DBS107 Units 400 600 800 1000 Volts 280 420 560 700 Volts 400 600 800 1000 Volts CJ 25 RθJA RθJL 40 15 TJ, TSTG -55 to +150 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 2. Units mounted on P.C.B. with 0.51 x 0.51" (13 x 13mm) copper pads 424 o C/W o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 425