MICROPROCESSOR CRYSTALS AT 49 CASE GROUNDED (- G), SURFACE MOUNT ABSM 3 Series 13.0 x 4.3 x 6.2 mm FEATURES: • • • • Excellent all-purpose surface-mount crystal. Two different pin connections. Four pad land pattern compatible with common plastic molded designs. Case ground on AG series. APPLICATIONS: • Modems, Communications, High-density equipment • Low EMI applications, Noise veductions. STANDARD SPECIFICATIONS Frequency 3.5 MHz - 25 MHz- 60MHz FrequencyRange Range 3.579MHz STAMode N DARD SPEC3.579MHz IF IC A TATION S Operation Fundamental, Operation Mode - 28MHz (Fundamental) Operating Temperature -10°C to + -60° C (See (3rd Options) 28.01MHz 60MHz overtone) Storage Temperature -55°C to + 125° C (Fundamental Frequency up to 50MHz) @ 25°C Frequency ± 50 ppmto max. (See(See Options) Operating Tolerance Temperature -10°C +60°C Options) Frequency Stability over Temp. ± 50 ppm max. (See Options) Storage Temperature 40°Cto +85°C Equivalent Resistance 200 ±50ppm W for 3.5max. MHz(See < F <Options) 4.0 MHz @ 25°C FrequencySeries Tolerance (ESR) Maximum 150 W for 4.0 MHz < F < 6.0 MHz Frequency Stability over Temp. ±100ppm max. (See Options) 100 W for 6.0 MHz < F < 10.0 MHz Equivalent Series Resistance 180 80 W max. F < 4.000MHz W forfor 103.579MHz MHz < F << 14.0 MHz _ F25< MHz (ESR) Fundamental 150 50 W max. 5.000MHz W forfor 144.000MHz MHz < F < 100 7WpF max. for 5.000MHz < F < 7.000MHz Shunt Capacitance C0 max. Load Capacitance CL p F (See 50 16 W max. forOption) 7.000MHz < F < 15.00MHz Drive Level µW max. 40 100 W max. for 15.00MHz < F < 50.00MHz Aging @ 25° First Year pp mfor max. 3rdCOvertone 100 ±W 5max. 28.0MHz < F < 60.00MHz Insulation Resistance 500 M W min. at 100 Vdc ± 15V Shunt Capacitance C0 7pF max. Load Capacitance CL 18pF (See Options) Drive Level 1mW max., 100µW correlation @ Aging 25°C per Year ±5ppm max. Insulation Resistance 500MW min. at 100Vdc ±15V PIN CONNECTIONS Environmental, and mechanical specifications see appendix C, Group 1. Marking, see appendix G. Tape and Reel, see appendix H.(1,000 pcs / reel). Reflow profile, see appendix E. Recommended handling, see appendix F. Application notes, see appendix A. Dimensions: Inches (mm) Part Number H (max.) ABSM3A ABSM32A ABSM33A ABSM3B ABSM32B ABSM33B ABSM3AG ABSM32AG 0.20 (5.1) 0.18 (4.5) 0.15 (3.8) 0.20 (5.1) 0.18 (4.5) 0.15 (3.8) 0.20 (5.1) 0.18 (4.5) ORDERING OPTIONS ABSM3XXX - Frequency - CL - ESR Blank 2, 3 Blank or G Temperature RXXX (value in W) A or B XX.XXXX MHz Load cap.in pF or -S for Series ABRACON IS ISO 9001 / QS 9000 CERTIFIED - -E for 0°C to + 70°C -B for -20°C to + 70°C -C for -30°C to + 70°C -N for -30°C to + 85°C -D for -40°C to + 85°C -1 -7 -2 -3 -4 - Tolerance for ± 10ppm for ± 15ppm for ± 20ppm for ± 25ppm for ± 30ppm - Stability -U -G -X -W -Y -H -Z for ± 10ppm for ± 15ppm for ± 20ppm for ± 25ppm for ± 30ppm for ± 35ppm for ± 50ppm - Mode - Packaging -T (Tape & Reel) -F (Fundamental AT > 28MHz) -FB (Fundamental BT > 28MHz)* o o * +100ppm @ -10 C to +60 C. NOTE: Left blank if standard • All specifications and markings subject to change without notice ABRACON 29 Journey • Aliso Viejo, CA 92656 • USA (949) 448-7070 • F AX : (949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com C O R P O R AT I O N ® 23