Mini SIP Passive Delay Lines ELECTRONICS INC. EP9910-XX & EP9910-XX-RC • Operating Temperature : 0°C to 70°C • Add “-RC” after part number for RoHS Compliant Time Delay (nS) Bi-directional Rise Time (nS Max.) DCR (Ω Max. ) Impedance (±10%) 50Ω 55Ω 75Ω 93Ω 100 Ω 200Ω EP9910-1A EP9910-2A EP9910-3A EP9910-4A EP9910-5A EP9910-6A EP9910-7A EP9910-8A EP9910-9A EP9910-10A EP9910-11A EP9910-12A EP9910-13A EP9910-14A EP9910-15A EP9910-16A EP9910-17A EP9910-18A EP9910-19A EP9910-20A EP9910-1H EP9910-2H EP9910-3H EP9910-4H EP9910-5H EP9910-6H EP9910-7H EP9910-8H EP9910-9H EP9910-10H EP9910-11H EP9910-12H EP9910-13H EP9910-14H EP9910-15H EP9910-16H EP9910-17H EP9910-18H EP9910-19H EP9910-20H EP9910-1F EP9910-2F EP9910-3F EP9910-4F EP9910-5F EP9910-6F EP9910-7F EP9910-8F EP9910-9F EP9910-10F EP9910-11F EP9910-12F EP9910-13F EP9910-14F EP9910-15F EP9910-16F EP9910-17F EP9910-18F EP9910-19F EP9910-20F EP9910-1 I EP9910-2 I EP9910-3 I EP9910-4 I EP9910-5 I EP9910-6 I EP9910-7 I EP9910-8 I EP9910-9 I EP9910-10 I EP9910-11 I EP9910-12 I EP9910-13 I EP9910-14 I EP9910-15 I EP9910-16 I EP9910-17 I EP9910-18 I EP9910-19 I EP9910-20 I EP9910-1B EP9910-2B EP9910-3B EP9910-4B EP9910-5B EP9910-6B EP9910-7B EP9910-8B EP9910-9B EP9910-10B EP9910-11B EP9910-12B EP9910-13B EP9910-14B EP9910-15B EP9910-16B EP9910-17B EP9910-18B EP9910-19B EP9910-20B EP9910-1C EP9910-2C EP9910-3C EP9910-4C EP9910-5C EP9910-6C EP9910-7C EP9910-8C EP9910-9C EP9910-10C EP9910-11C EP9910-12C EP9910-13C EP9910-14C EP9910-15C EP9910-16C EP9910-17C EP9910-18C EP9910-19C EP9910-20C 20%-80% 1 ± 0.2 2 ± 0.2 3 ± 0.2 4 ± 0.2 5 ± 0.25 6 ± 0.3 7 ± 0.3 8 ± 0.3 9 ± 0.3 10 ± 0.3 11 ± 0.35 12 ± 0.35 13 ± 0.35 14 ± 0.35 15 ± 0.35 16 ± 0.4 17 ± 0.4 18 ± 0.4 19 ± 0.4 20 ± 0.4 1.6 1.6 1.7 1.7 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0 0.20 0.25 0.35 0.45 0.55 0.70 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 DC Electrical Characteristics Min Distortion Temperature Coefficient of Delay Insulation Resistance @ 100 Vdc Dielectric Strength Max Unit ±10 100 % PPM/°C Meg Ohms Vdc 1K 100 Schematic 3 1 2 Recommended Operating Conditions P W* Pulse Width % of Total Delay D* Duty Cycle TA Operating Free Air Temperature *These two values are inter-dependent. Min Max 200 0 40 70 Unit % % °C Package .490 Max. (12.45) PCA Input Pulse Test Conditions @ 25°C V IN PW TRI P RR .375 EP9910-1H(-RC) D.C. .025 Max. 1.0 nS (.635) (9.53) 3 Volts 300 % 2.0 nS 1.0 MHz Pulse Input Voltage Pulse Width % of Total Delay Input Rise Time (10 - 90%) Pulse Repetition Rate 3 2 1 .125 Min. (3.18) .120 Max. (3.05) Notes : EP9910-XX EP9910-XX-RC 1. Lead Finish SnPb Hot Tin Dip (Sn) 2. Peak Solder Rating 260°C 260°C .080 Typ. (2.03) (Wave Solder Process Only) 3. Weight 4. Packaging Information (Tube) 0.6 grams 0.6 grams 40 pieces/tube 40 pieces/tube .100 (2.54) .300 (7.62) Leads : #24 TC WIRE Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CS9910-XX & -RC Rev. F2 8/17/06 RR TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com