CREE CLN6A-WKW-CK0L0343 Cool and warm white led Datasheet

Cree® CLN6A-WKW/MKW
Data Sheet
The CLN6A LED delivers superior value with common voltage, current, size and
optical properties. The Cree CLN6A is available in both cool and warm white to
address a variety of lighting applications, including linear, portable, landscape and
entertainment.
FEATURES
APPLICATIONS
•
Size (mm): 5.0 x 5.0 x 1.3
•
Linear Lighting
•
Cool White (CLN6A-WKW):
»» CCT: 4600 K - 15000 K, typical 5500 K
»» CRI: 72
»» Luminous Flux: 60.5 - 101.8
•
Channel Letter
•
Portable Lighting
•
Architectural & Landscaping Lighting
•
Entertainment Lighting
•
Warm White (CLN6A-MKW)
»» CCT: 2500 K - 4600 K, typical 3200 K
»» CRI: 80
»» Luminous Flux: 51.0 - 101.8
Max. Current: 350 mA
•
Viewing Angle: 115°
•
RoHS-Compliant
D-CT979.003
Data Sheet: CL
•
Subject to change without notice.
www.cree.com/ledlamps
1
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
Cool/Warm
Forward Current
IF
350
mA
IFP
600
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
1200
mW
Operation Temperature
Topr
-40 ~ +90
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
125
°C
Peak Forward Current
Note 1
Note:
1. Pulse width ≤10 msec, duty cycle ≤10%.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Color
Symbol
Condition
Unit
Forward Voltage
Cool/Warm
VF
IF = 300 mA
V
Reverse Current
Cool/Warm
IR
VR = 5 V
μA
Cool
ΦV
IF = 300 mA
lm
60.5
Warm
ΦV
IF = 300 mA
lm
51.0
x
IF = 300 mA
0.3325
y
IF = 300 mA
0.3411
x
IF = 300 mA
0.4234
y
IF = 300 mA
0.3990
Luminous Flux
Cool
Chromaticity
Coordinates
Warm
Minimum
Typical
Maximum
3.8
4.4
100
80
65
Thermal Resistance, junction
to solder point Note 1
Cool/Warm
RTHJS
IF = 300 mA
°C/W
15
Viewing Angle (FWHM)
Cool/Warm
2θ½
IF = 300 mA
deg
115
Note:
1. Rth test condition: mounted on MCPCB (pad size ≥40 mm2).
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Flux Bin Limit (IF = 300 mA)
Warm White Cool White Bin Code
Min.(lm)
Max.(lm)
Bin Code
Min.(lm)
Max.(lm)
J0
60.5
72.0
H0
51.0
60.5
K0
72.0
85.6
J0
60.5
72.0
101.8
K0
72.0
85.6
L0
85.6
101.8
L0
85.6
Tolerance of measurement of luminous flux is ±10%.
VF Bin Limit (IF = 300 mA)
Cool White Bin Code
Min.(V)
Max.(V)
44
2.8
3.2
45
3.2
3.6
46
3.6
4.0
47
4.0
4.4
Warm White Bin Code
Min.(V)
Max.(V)
44
2.8
3.2
45
3.2
3.6
46
3.6
4.0
47
4.0
4.4
Tolerance of measurement of VF is ±0.05 V.
Color Bin Limit (IF = 300 mA)
Cool White
Bin
Code
Subbin
Wa
Wb
W1
Wc
Wd
Bin
Code
Subbin
x
y
0.2640
0.2670
0.2735
0.2860
0.2808
0.2740
0.2290
0.2720
0.2633
0.2410
0.2720
0.2340
0.2640
0.2200
0.2545
0.2245
0.2545
0.2480
0.2640
0.2670
0.2720
0.2575
0.2633
0.2410
0.2633
0.2410
0.2720
0.2575
0.2800
0.2480
0.2720
0.2340
x
y
0.2545
0.2480
0.2633
0.2410
0.2545
0.2245
0.2450
We
Wf
W2
Wg
Wh
CLD-CT979.003
Subbin
x
y
0.2830
0.3050
0.2950
0.3210
0.2998
0.3028
0.2575
0.2895
0.2905
0.2720
0.2575
0.2895
0.2905
0.2808
0.2740
0.2998
0.3028
0.2880
0.2620
0.3045
0.2865
0.2800
0.2480
0.2960
0.2760
0.2735
0.2860
0.2950
0.3210
0.2830
0.3050
0.3070
0.3370
0.2895
0.2905
0.3100
0.3150
0.2808
0.2740
0.2998
0.3028
0.2808
0.2740
0.2998
0.3028
0.2895
0.2905
0.3100
0.3150
0.2960
0.2760
0.3130
0.2970
0.2880
0.2620
0.3045
0.2865
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
3
Bin
Code
Wj
Wk
W3
Wm
Wn
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Color Bin Limit (IF = 300 mA)
Cool
White
Bin
Code
Subbin
Wp
Wq
W4
Wr
Ws
x
y
0.3070
0.3185
0.3200
0.3270
0.3100
0.3150
0.3100
0.3150
0.3200
0.3270
0.3215
0.3075
0.3130
0.2970
0.3185
0.3485
0.3300
0.3600
0.3300
0.3390
0.3200
0.3270
0.3200
0.3270
0.3300
0.3390
0.3300
0.3180
0.3215
0.3075
Bin
Code
Subbin
x
y
0.3370
0.3300
0.3600
0.3485
0.3455
0.3725
0.3443
0.3535
0.3300
0.3390
0.3300
0.3390
0.3443
0.3535
0.3430
0.3345
0.3300
0.3180
0.3455
0.3725
0.3610
0.3850
0.3585
0.3680
0.3443
0.3535
0.3443
0.3535
0.3585
0.3680
0.3560
0.3510
0.3430
0.3345
Wt
Wu
W5
Wv
Ww
Tolerance of measurement of the color coordinates is ±0.01.
Warm White
Bin
Code
Subbin
Ma
Mb
M1
Mc
Md
Bin
Code
Subbin
x
y
0.3900
0.4030
0.3576
0.3651
0.3926
0.3751
0.3783
0.4118
0.4021
0.3820
0.4075
0.4260
0.4390
0.3576
0.3651
0.3926
0.3541
0.3401
0.3822
0.3682
0.3491
0.3976
0.3653
0.3749
0.3781
0.4118
0.4021
0.3820
0.4075
0.4260
0.4390
0.3751
0.3783
0.4118
0.4021
0.3926
0.3915
0.4310
0.4128
0.4030
0.4250
0.4490
0.4530
0.3751
0.3783
0.4118
0.4021
0.3682
0.3491
0.3976
0.3653
0.3822
0.3580
0.4129
0.3725
0.3926
0.3915
0.4310
0.4128
x
y
0.3610
Me
Mf
M2
Mg
Mh
Bin
Code
Subbin
x
y
0.4250
0.4490
0.4530
0.3915
0.4310
0.4128
0.4572
0.4203
0.4785
0.4625
0.3915
0.4310
0.4128
0.3580
0.4129
0.3726
0.4359
0.3782
0.4572
0.4203
0.4785
0.4625
0.4572
0.4203
0.4834
0.4279
0.5080
0.4720
0.4572
0.4203
0.4359
0.3782
0.4588
0.3838
0.4834
0.4279
Mj
Mk
M3
Mm
Mn
Tolerance of measurement of the color coordinates is ±0.01.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
4
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
CIE Chromaticity Diagram
0.5300
0.4700
M3
M
2
Mm
Mj
Mg
M
0K
500
W
W
3
W
e
W
W
1
W
W
0.2300
0.2300
a
c
W
W
W
W
g
p
W
Ma
r
W
W
t
W
W
Mk
Mc
5
W
60
00
K
4
W
70
00
K
80
00
K
W
2
0.2900
W
m
W
j
W
W
W
W
10
00
0K 9 00
0K
y
0.3500
0.1700
0.1700
Me
1
0.4100
Mf
Mh
Md
v
Mb
w
u
Mn
2700K
2500K
3000K
3500K
4000K
s
q
n
k
h
f
d
b
0.2900
0.3500
0.4100
0.4700
0.5300
x
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Order Code Table*
Color
Kit Number
Viewing Angle
Luminous Flux (lm)
Min.
Max.
Color Bin Code
Cool White
CLN6A-WKW-CJ0L0153
115
60.5
101.8
W1,W2,W3,W4,W5
Cool White
CLN6A-WKW-CJ0L0343
115
60.5
101.8
W3,W4
Cool White
CLN6A-WKW-CJ0L0453
115
60.5
101.8
W4,W5
Cool White
CLN6A-WKW-CK0L0343
115
72.0
101.8
W3,W4
Cool White
CLN6A-WKW-CK0L0453
115
72.0
101.8
W4,W5
Color
Kit Number
Viewing Angle
Luminous Flux (lm)
Min.
Max.
Color Bin Code
Warm White
CLN6A-MKW-CH0K0133
115
51.0
85.6
M1,M2,M3
Warm White
CLN6A-MKW-CH0K0233
115
51.0
85.6
M2,M3
Warm White
CLN6A-MKW-CH0K0513
115
51.0
85.6
W5,M1
Warm White
CLN6A-MKW-CJ0K0233
115
60.5
85.6
M2,M3
Warm White
CLN6A-MKW-CJ0K0513
115
60.5
85.6
W5,M1
Warm White
CLN6A-MKW-CH0L0513
115
51.0
101.8
W5,M1
Warm White
CLN6A-MKW-CJ0L0513
115
60.5
101.8
W5,M1
Note:
• The above kit numbers represent the order codes that include multiple flux-bin and color-bin codes. Only one fluxbin code and one color-bin code will be shipped on each reel. Single flux-bin codes and single color-bin code cannotb
be ordered.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
6
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs
If (mA)
600
2.5
500
2.0
400
1.5
300
1.0
200
0.5
0.0
2.6
Vf(V)
3.0
3.4
3.8
4.2
4.6
5.0
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
(RELATIVE LUMINOUS FLUX)
0.0
0.0
If(mA)
100
200
300
400
500
600
FIG.2 RELATIVE LUMINOUS FLUX VS.
FORWARD CURRENT
(RELATIVE LUMINOUS FLUX)
100%
1.0
(RELATIVE RADIANT POWER)
80%
5000K - 10000K CCT
60%
0.5
3700K - 5000K CCT
2600K - 3700K CCT
40%
20%
0.0
0
20
40
60
80
Ta ( C)
100
FIG.3 RELATIVE LUMINOUS FLUX VS AMBIENT
TEMPERATURE DERATING BASED ON Tjmax=125 C
500
WL(nm)
0%
400 450
500
550 600
650 700
750
FIG.4 RELATIVE SPECTRAL POWER DISTRIBUTION
50% Power Angle : 115
(RELATIVE LUMINOUS FLUX)
0
1.0
IF(mA)
400
300
0.5
200
100
0.0
0
20
40
60
80
Ta ( C)
100
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT
TEMPERATURE. DERATING BASED ON Tjmax=125 C
0
-60
-90
-30
FIG.6 FAR FIELD PATTERN
0
30
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
7
CLD-CT979.003
60
90
Angle
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Mechanical Dimensions
All dimensions are in mm.
Heatsink
Internal Circuit
Cathode
Cathode
Cathode
Anode
Anode
Anode
ESD Protection
Heatsink
Notes
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
8
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
9
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Reliability
Tests and Results
Test
Applicable Standards
Test Condition
Note
Number of
Damaged
Temperature Cycle*
JEITA ED-4701
100 105
-40°C~25°C~100°C~25°C
30 mins, 5 mins, 30 mins, 5 mins
100 cycles
0/50
Thermal Shock*
MIL-STD-202G
-40°C~100°C
30 mins, 30 mins
100 cycles
0/50
Moisture Resistance
JEITA ED-4701
200 203
25°C~65°C~
90%RH 24hrs/1cycle
10 cycles
0/25
High Temperature Storage
JEITA ED-4701
200 201
TA=100°C
1000 hrs
0/25
Temperature Humidity Storage
JEITA ED-4701
100 103
TA=60°C
RH=90%
1000 hrs
0/25
Low Temperature Storage
JEITA ED-4701
200 202
TA=-40°C
1000 hrs
0/25
High Temperature Life Test*
-
TA=85°C
IF=160 mA
1000 hrs
0/25
Life Test*
-
TA=25°C
IF=350 mA
1000 hrs
0/25
High Humidity Heat Life Test*
-
60°C RH=90%
IF=250 mA
500 hrs
0/25
Low Temperature Life Test
-
Ta=-30°C
IF=300 mA
1000 hrs
0/25
Resistance to Soldering Heat(Reflow
Soldering)*
JEITA ED-4701
300 301
Tsol=260(±5)°C,10sec (Pre treatment 30°C,70%,168hrs)
2 times
0/25
Solder ability (Reflow Soldering)
JEITA ED-4701
300 303
TSOL=215±5°C, 3 sec
(Lead Solder)
1 time
(over 95%)
0/25
Vibration-variable Frequency
MIL-STE-883
Method 2007
20G min, 20 to 2000Hz, 4cycles, 4mins,
Each x,y,z
16 mins
0/25
Substrate Bending
JEITA ED-4702
3mm, 5±1 sec
1 time
0/25
Adhesion Strength
JEITA ED-4702
5N, 10±1 sec
1 time
0/25
Electrostatic Discharge Test
MIL-STD-883
Method 2007
Human body model 1000 V
+/-1 time
0/25
Items marked with * are selective.
Failure Criteria
Criteria for Judgment
Item
Symbol
Test
Condition
Min.
Max.
Forward Voltage
VF
IF = 300 mA
–
Initial Data x 1.1
Reverse Current
IR
VR = 5 V
-
100 μA
Luminous Flux/Intensity
ФV
IF = 300 mA
Initial Data x 0.7
-
Resistance to Soldering
Heat
-
IF = 300 mA
No dead lamps and visual damage
Vibration-variable
Frequency
-
IF = 300 mA
No dead lamps and visual damage
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
10
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Soldering & Handling
1.
2.
3.
4.
Cleaning
• Don’t use unspecified chemical liquids to clean the SMD LED; the chemical could harm the SMD LED. When
washing is necessary, please immerse the SMD LED in alcohol at normal room temperature for less than 1
minute and dry at normal room temperature for 15 minutes before use.
• The influence of ultrasonic cleaning on the SMD LED depending on factors such as ultrasonic power and the way
SMD LED are mounted. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the
SMD LED.
Moisture-Proof Packing
• In order to prevent moisture absorption into SMD LED during the transportation and storage, SMD LED is
packed in a moisture barrier bag. Desiccants and a humidity indicator are packed together with SMD LED as the
secondary protection. The indication of humidity indicator card provides the information of humidity within SMD
packing.
Storage
• Shelf life in original sealed bag at storage condition of <40ºC and <90%RH is 12 months. Baking is required
whenever shelf life is expired.
• Before openning the packaging , Please check whether bag leak air or not.
• After bag opening, the SMD LED must be stored under the condition < 30ºC and < 60%RH. Under this condition,
SMD LED must be used (subject to reflow) within 168 hours after bag opening, and re-baking is required when
exceeding 168 hours.
• For baking, place SMD LED in oven at temperature 80ºC±5ºC and relative humidity <=10%RH, for 24 hours.
• Take out the material from packaging bag for re-bake. Do not open the door of oven frequently during the baking
process.
Soldering
• Manual soldering by soldering iron
• The use of a soldering iron of less than 25W is recommended and the temperature of the iron must be kept at
below 315ºC, with soldering time within 2 seconds.
• The epoxy resin of SMD LED should not be in contact with tip of soldering iron.
• No mechanical stress should be exerted on the resin portion of SMD LED during soldering.
• Handling of SMD LED should be done when the package has been cooled down to below 40ºC or less. This is to
prevent the SMD LED failures due to thermal-mechanical stress during handling.
• Reflow Soldering: The temperature (top surface of SMD LED) profile is as below:
Heat Sink
Temperature
Melting-point
Pre-heat
Soak
Reflow
Cooling
Time
Solder = Lead-free
Average ramp-up rate = 4ºC/s max
Peak temperature = 250ºC max.
Preheat temperature = 150ºC ~200ºC
Time within 5ºC of actual Peak Temperature = 10s max.
Preheat time = 100s max.
Duration above 217ºC is 80s max.
Ramp-down rate = 6ºC/s max.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
11
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Packaging
•
•
•
•
•
The boxes are not water-resistant, and they must be kept away from water and moisture.
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
The reel pack is applied in SMD LED.
Max 1100 pcs per reel.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
12
CLD-CT979.003
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages