AZETTLER AZ6991-1A-5D Sensitive subminiature relay Datasheet

AZ6991
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint utilizing only 0.22 square inch
of PCB area
• Thin vertical profile only 0.196" wide
• 6 Amp switching capability
• High sensitivity, 95 mW pickup
• Dielectric strength 4000 Vrms contact to coil
• Coils to 60 VDC
• Epoxy sealed version for wave soldering and cleaning
available
• Isolation spacing greater than 8 mm
• UL/CUR file E43203, VDE file 40020561
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 180 W or 1662 VA
Max. switched current: 6 A
Max. switched voltage: 150* VDC or 400 VAC
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
6A at 277 VAC resistive
UL/CUR
6A at 30 VDC resistive
R300 Pilot Duty
VDE
Material
6A at 250 VAC resistive
6A at 30 VDC resistive
Silver nickel
Silver nickel with gold plating
COIL
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
10 million operations
3 X 104 at 6 A, 30 VDC or 250 VAC Res.
Operate Time (typical)
8 ms at nominal coil voltage
Release Time (typical)
4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
1000 Vrms between open contacts
4000 Vrms contact to coil
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" DA 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester 94V-0
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
5.4 grams
Power
At Pickup Voltage
(typical)
95 mW
Max. Continuous
Dissipation
1.0 W at 20°C (68°F) ambient
Temperature Rise
20°C (36°F) at nominal coil voltage
Temperature
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
8/10/06W
AZ6991
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil
VDC
3
ORDER NUMBER*
Must Operate
VDC
2.25
Max. Continuous
VDC
6.9
Coil Resistance
Unsealed
Sealed
53 ± 10%
AZ6991–1A–3D
AZ6991–1A–3DE
5
3.75
11.5
147 ± 10%
AZ6991–1A–5D
AZ6991–1A–5DE
6
4.50
13.8
212 ± 10%
AZ6991–1A–6D
AZ6991–1A–6DE
9
6.75
20.7
476 ± 10%
AZ6991–1A–9D
AZ6991–1A–9DE
27.6
848 ± 10%
AZ6991–1A–12D
AZ6991–1A–12DE
41.4
1906 ± 15%
AZ6991–1A–18D
AZ6991–1A–18DE
12
9.00
18
13.5
24
18.0
55.2
3390 ± 15%
AZ6991–1A–24D
AZ6991–1A–24DE
48
36.0
97.7
10600 ± 15%
AZ6991–1A–48D
AZ6991–1A–48DE
AZ6991–1A–60D
AZ6991–1A–60DE
60
45.0
122.2
16600 ± 15%
*Substitute “-1C” for “-1A “ to indicate 1 Form C contacts. Add suffix “A” for gold plated contacts.
MECHANICAL DATA
Wiring Diagram
Outline Dimensions
1 FORM A
0.591MAX
[15.0]
0.02
[0.5]
0.035
[0.9]
0.02
*
[0.5] 0.039
[1.0]
0.149
0.198 0.198
[3.78]
[5.04]
0.138
[3.5]
0.039
[1.0]
0.047
[1.2]
1 FORM C
0.197
[5.0]
[5.04]
0.645
[16.38]
1.102MAX
[28.0]
Viewed toward terminals
* Missing on 1 Form A version
1 FORM C
1 FORM A
2-Ø0.039
[Ø1.0]
3-Ø0.051
[Ø1.3]
2-Ø0.039
[Ø1.0]
2-Ø0.051
[Ø1.3]
0.197
[5.0]
0.047
[1.2]
0.035
[0.9]
0.149
[3.78]
0.645
[16.38]
0.198
[5.04]
0.197
[5.0]
0.035
[0.9]
0.149
[3.78]
1.102
[28.0]
0.198
[5.04]
0.198
[5.04]
0.047
[1.2]
0.645
[16.38]
1.102
[28.0]
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
8/10/06W
Similar pages