2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF3 Series ■Features Correspond to Board Design in Wide Variation ●ID Socket (1) Low profile design with the mounting height of 6.8mm (2) Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID type. (DF11 series represents the 2mm pitch single-row product.Please refer to page A266 to A277.) ●Crimp Socket (1) Low profile design with mounting height 7.5mm. (Please refer to the application pattern figure on page A256 for details.) (2) Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. ●Receptacle (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. (2) For horizontal connection, the board to board size is the low profile of 6.6mm. (Please refer to the application pattern on page A256 for details.) (3) Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. ●Pin Header (1) The board pre-fixed kink is treated with the post pin. (2) The style employs a scoop-proof and sturborn box type. (3) The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. ●In-line Plug (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. (2) The in-line adapter is available to insert and in-line the ID socket from both sides. ■Applications Business equipment such as copy machine and printer A254 BEmbossed Carrier Tape Dimensions Unit: mm Product Type Size DF3/3D-*P-2H Number of Contacts A B C D 2 to 4 5 to 7 24 ––– 11.5 24.4 32 28.4 14.2 32.4 8 to 12 44 40.4 20.2 44.4 13 to 15 56 52.4 26.2 56.4 BPrecautions 1. Recommended Temperature Profile (SMT) Note1: Maximum twice action is allowed under the same condition. However, the interval between the first and second actions must be maintained at room temperature. Note2: The temperature indicates the board surface temperature on the connector lead area. 2. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds 3. Recommended Screen Thickness (SMT) 0.15 to 0.2mm 4. Board Warpage (SMT) 5. Recommended Soldering Condition (DIP) Based on both connector edges, 0.03mm max. in the connector center portion ■Flow Condition with Automatic Soldering Tool. Soldering temperature: 250±5ç, Soldering time: Within 3 seconds ■Manual Soldering Condition. Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds 6. Cleaning Condition Refer to the "Nylon Connector Use Hand book". 7. Connection Condition Refer to the "Nylon Connector Use Hand book". A265 ■Product Specifications AWG 22 to 24:3A Current rating Rating Crimping Wire size Note 1 IDC Voltage rating AC100V Crimping Wire size AWG 26 :2A AWG 28 :1A AWG 26, 28:1A Press-fit: 250V AC IDC Operating Temperature Range -30ç to +85ç Note 2. Operating Humidity Range Storage Temperature Range -10ç to +60ç Note 3. Press-connect: 100V AC Storagg Humidity Range UL-CSA Safety Standard and Approved specification Rated Current Wire size Rating Rated Voltage AWG 24 to 28: 1A 30V AC Item 40% to 70% ■UL CSA Safety Standard File No. UL :E52653 CSA :LR95109 ■UL CSA Acquisition Objective Item 1DF3-*S-2C 2DF3/3A-*P-2DSA/DS 3DF3/DF3AA-*EP-2C 4DF3-*S-2R26/28 5DF3-*P-2H Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 30m ohms max 100mA 4. Single Insertor/Extraction Force MIN0.3N (30gf), MAX4.4N(450gf) 5. Vibration 40% to 80% Measure by the square steel pin with 0.5±0.002mm No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 500M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 7. Temperature Cycle (-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10minutes) 5 cycles Contact resistance: 30m ohms max.:Insulation resistance: 1000M ohms min. 8. Durability (Mating/un-mating) Contact resistance: 30m ohms max. Tin plating: 30 cycles Gold plating: 50 cycles 9. Resistance to Soldering Heat No deformation of components affecting performance. Flow: 250ç for 10 seconds Manual soldering: 300ç for 2 seconds Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Product Part Materia Finish Remarks Crimping Socket Insulator Polyamide Black UL94V-0 IDC Contact for Socket ID Socket Receptacle Pin Header SMT Pin Header In-line Plug In-line IDC Contact In-line Adapter Contact Phosphor bronze Tin plated or gold plated ––––––– Insulator Polyamide Black UL94V-0 Contact Phosphor bronze Tin plated or gold plated ––––––– Insulator Polyamide Black UL94V-0 Contact Phosphor bronze Tin plated or gold plated ––––––– Insulator Polyamide Black UL94V-0 Contact Brass Tin plated or gold plated ––––––– Insulator Polyamide Beige UL94V-0 Contact Phosphor bronze Tin plated or gold plated ––––––– Metal tab Brass Tin plated ––––––– Insulator Polyamide Black UL94V-0 Contact Phosphor bronze Tin plated or gold plated ––––––– Insulator Polyamide Black UL94V-0 Contact Brass Tin plated ––––––– Note:HRS's tin plating takes actions against whisker. A255 ■Ordering Information ●Connector DF 3 - * S - 2C q w q Series Name : DF w Series No. : 3, 3A, 3AA e r t y y Connection Form/Contact Style C e Number of Contacts : 2~15 : Crimp socket R26 : ID socket for AWG26 r Connector Type R28 : ID socket for AWG28 S : Socket DSA : Straight through hole P : Pin Header DS : Right angle through hole EP : In-line Plug V : Straight SMT : 2mm H : Right angle SMT A : Adapter t Contact Pitch ●Contact DF3 - EP2428PCFA q q Contact Type e r e Contact Type/Packaging Type NONE : For socket SCF EP SC : Socket contact, Bag PCF : Plug contact, Embossed tape PC : Plug contact, Bag : For in-line plug w Applicable Wire Size 22 : AWG22 2428 : AWG24 to 28 ■Application pattern A256 w : Socket contact, Embossed tape r Plating Type Blank : Tin plated A : Gold plated C : Gold plated ■ID Socket [Specific No.]–* *, (* *) Blank : Tin plated, 100 pieces per bag (01) : Gold plated, 100 pieces per bag (20) : Tin plated, Tube packaging This picture shows the cable assembled status. Note 1. Mark to determine the socket name Mark6: R26, Mark8: R28 ●AWG28 Unit: mm Number of Tube packaging Number of A B A B Part Number CL No. Part Number CL No. Contacts Quantity Contacts DF3- 2S-2R26(**) 543-0078-7-** 2 6 2 190 pieces DF3- 2S-2R28(**) 543-0092-8-** 2 6 2 DF3- 3S-2R26(**) 543-0079-0-** 3 8 4 142 DF3- 3S-2R28(**) 543-0093-0-** 3 8 4 DF3- 4S-2R26(**) 543-0080-9-** 4 10 6 114 DF3- 4S-2R28(**) 543-0094-3-** 4 10 6 DF3- 5S-2R26(**) 543-0081-1-** 5 12 8 094 DF3- 5S-2R28(**) 543-0095-6-** 5 12 8 DF3- 6S-2R26(**) 543-0082-4-** 6 14 10 080 DF3- 6S-2R28(**) 543-0096-9-** 6 14 10 DF3- 7S-2R26(**) 543-0083-7-** 7 16 12 070 DF3- 7S-2R28(**) 543-0097-1-** 7 16 12 DF3- 8S-2R26(**) 543-0084-0-** 8 18 14 062 DF3- 8S-2R28(**) 543-0098-4-** 8 18 14 DF3- 9S-2R26(**) 543-0085-2-** 9 20 16 056 DF3- 9S-2R28(**) 543-0099-7-** 9 20 16 DF3-10S-2R26(**) 543-0086-5-** 10 22 18 052 DF3-10S-2R28(**) 543-0100-4-** 10 22 18 DF3-11S-2R26(**) 543-0087-8-** 11 24 20 046 DF3-11S-2R28(**) 543-0101-7-** 11 24 20 DF3-12S-2R26(**) 543-0088-0-** 12 26 22 044 DF3-12S-2R28(**) 543-0102-0-** 12 26 22 DF3-13S-2R26(**) 543-0089-3-** 13 28 24 040 DF3-13S-2R28(**) 543-0103-2-** 13 28 24 DF3-14S-2R26(**) 543-0090-2-** 14 30 26 038 DF3-14S-2R28(**) 543-0104-5-** 14 30 26 DF3-15S-2R26(**) 543-0091-5-** 15 32 28 034 DF3-15S-2R28(**) 543-0105-8-** 15 32 28 Note 2.The quantity for delivery of the specific No. "None" and (01) is determined per bag (100pcs.). If needed, please order productsper bag. Note 3.If the Full automatic IDC machine to hit the DF11 single core,the (20) tube packaging specification will be applied. Note 4.Order the tube packaging product, multiplying the tube packaging quantity (pieces). ●AWG26 Unit: mm Tube packaging Quantity 190 pieces 142 114 094 080 070 062 056 052 046 044 040 038 034 the ■Applicable Cable Part Number Applicable Cable Jacket Diameter DF3-*S-2R26 UL1061 AWG26 (7/0.16) Ø0.9 to 1mm DF3-*S-2R28 UL1061 AWG28 (7/0.127) Ø0.9 to 1mm ■Applicable ID Connection Tool Type Part Number DF11 Single Contact Punching Full Automatic ID Machine AM700/DF11 DF3 DF4 Desktop ID Machine DF3(4)/ID-MO Connection Type ■ Effective Harness Form 1DF11-Both ended, single ended 2DF11-DF11, Separation 3DF11-DF3, Separation ■ Effective Harness Length 100 to 2,000mm ■ Conduction Inspection Mechanism Installed DF3 No restriction DF4 No restriction Remarks Connector is the specification (20). Tube packaging applied Desktop machine for small lot A257 ■Crimping Socket [Specific No.] –* *, (* *) Blank: 100 pieces per pack This picture shows the Contact crimped status. Unit: mm Number of Contacts A B DF3-2S-2C(**) 543-0003-8-** 2 06 02 DF3-3S-2C(**) 543-0004-0-** 3 08 04 DF3-4S-2C(**) 543-0005-3-** 4 10 DF3-5S-2C(**) 543-0006-6-** 5 12 DF3-6S-2C(**) 543-0007-9-** 6 DF3-7S-2C(**) 543-0008-1-** 7 Part Number CL No. Number of Contacts A B DF3-19S-2C(**) 543-0010-3-** 09 20 16 DF3-10S-2C(**) 543-0011-6-** 10 22 18 06 DF3-11S-2C(**) 543-0012-9-** 11 24 20 08 DF3-12S-2C(**) 543-0013-1-** 12 26 22 14 10 DF3-13S-2C(**) 543-0014-4-** 13 28 24 16 12 DF3-14S-2C(**) 543-0015-7-** 14 30 26 Part Number CL No. 8 15 18 32 14 28 DF3-8S-2C(**) 543-0009-4-** DF3-15S-2C(**) 543-0016-0-** Note1: The product's contact number indicated. Note2: The quantity for delivery of the specification No. "None" is determined per bag (100 pcs.). If needed, please order the products per bag. Note3: A quantity of "500 pieces package" and "1000 pieces package" for delivery is dealt with pieces. Order example: 500, 1000, and 1500 pieces... ■Receptacle [Specific No.] –* *, (* *) (20) :Tin plated, Tube packaging (50) :Gold plated, Tube packaging Note1: The product's contact number indicated ●Board Through-hole Diameter: Ø0.7++0.1 0 Unit: mm Part Number A258 CL No. Number of Contacts A B Tube Package Quantity Part Number CL No. Number of Contacts A B Tube Package Quantity DF3-2S-2DSA(**) 543-0048-6-** 2 06 02 80 pieces DF3- 9S-2DSA(**) 543-0055-1-** 09 20 16 24 pieces DF3-3S-2DSA(**) 543-0049-9-** 3 08 04 60 DF3-10S-2DSA(**) 543-0056-4-** 10 22 18 21 DF3-4S-2DSA(**) 543-0050-8-** 4 10 06 48 DF3-11S-2DSA(**) 543-0057-7-** 11 24 20 20 DF3-5S-2DSA(**) 543-0051-0-** 5 12 08 40 DF3-12S-2DSA(**) 543-0058-0-** 12 26 22 18 DF3-6S-2DSA(**) 543-0052-3-** 6 14 10 34 DF3-13S-2DSA(**) 543-0059-2-** 13 28 24 17 DF3-7S-2DSA(**) 543-0053-6-** 7 16 12 30 DF3-14S-2DSA(**) 543-0060-1-** 14 30 26 16 8 18 14 27 DF3-15S-2DSA(**) 543-0061-4-** DF3-8S-2DSA(**) 543-0054-9-** Note2: Please order the tube packaging at the multiplied tube packaging quantity (pieces). 15 32 28 15 ■Straight Pin Header ●Board Through-hole Diameter: Ø0.8++0.1 0 ●Kink Pre-fixed Effective Diameter: Ø0.8++0.05 0 Unit: mm Tin Plating Gold Plating Part Number CL No. Part Number CL No. 543-0165-0 543-0017-2-01 DF3A- 2P-2DSA DF3- 2P-2DSA(01) 543-0166-2 543-0018-5-01 DF3A- 3P-2DSA DF3- 3P-2DSA(01) 543-0167-5 543-0019-8-01 DF3A- 4P-2DSA DF3- 4P-2DSA(01) 543-0168-8 543-0020-7-01 DF3A- 5P-2DSA DF3- 5P-2DSA(01) 543-0169-0 543-0021-0-01 DF3A- 6P-2DSA DF3- 6P-2DSA(01) 543-0170-0 543-0022-2-01 DF3A- 7P-2DSA DF3- 7P-2DSA(01) 543-0171-2 543-0023-5-01 DF3A- 8P-2DSA DF3- 8P-2DSA(01) 543-0172-5 543-0024-8-01 DF3A- 9P-2DSA DF3- 9P-2DSA(01) 543-0173-8 543-0025-0-01 DF3A-10P-2DSA DF3-10P-2DSA(01) 543-0174-0 543-0026-3-01 DF3A-11P-2DSA DF3-11P-2DSA(01) 543-0175-3 543-0027-6-01 DF3A-12P-2DSA DF3-12P-2DSA(01) 543-0176-6 543-0028-9-01 DF3A-13P-2DSA DF3-13P-2DSA(01) 543-0177-9 543-0029-1-01 DF3A-14P-2DSA DF3-14P-2DSA(01) 543-0178-1 543-0030-0-01 DF3A-15P-2DSA DF3-15P-2DSA(01) Note : The quantity for delivery is determined per bag (100 pcs.). If needed, please order the products per bag. Number of Contacts A B 2 3 4 5 6 7 8 9 10 11 12 13 14 15 06 08 10 12 14 16 18 20 22 24 26 28 30 32 02 04 06 08 10 12 14 16 18 20 22 24 26 28 ■Right Angle Pin Header ●Board Through-hole Diameter: Ø0.8++0.1 0 ●Kink Pre-fixed Effective Diameter: Ø0.8++0.05 0 Unit: mm Tin Plating Gold Plating Part Number CL No. Part Number CL No. 543-0179-4 543-0031-3-01 DF3A- 2P-2DS DF3- 2P-2DS(01) 543-0180-3 543-0032-6-01 DF3A- 3P-2DS DF3 -3P-2DS(01) 543-0181-6 543-0033-9-01 DF3A- 4P-2DS DF3- 4P-2DS(01) 543-0182-9 543-0034-1-01 DF3A- 5P-2DS DF3- 5P-2DS(01) 543-0183-1 543-0035-4-01 DF3A- 6P-2DS DF3- 6P-2DS(01) 543-0184-4 543-0036-7-01 DF3A- 7P-2DS DF3- 7P-2DS(01) 543-0185-7 543-0037-0-01 DF3A- 8P-2DS DF3- 8P-2DS(01) 543-0186-0 543-0038-2-01 DF3A- 9P-2DS DF3- 9P-2DS(01) 543-0187-2 543-0039-5-01 DF3A-10P-2DS DF3-10P-2DS(01) 543-0188-5 543-0040-4-01 DF3A-11P-2DS DF3-11P-2DS(01) 543-0189-8 543-0041-7-01 DF3A-12P-2DS DF3-12P-2DS(01) 543-0190-7 543-0042-0-01 DF3A-13P-2DS DF3-13P-2DS(01) 543-0191-0 543-0043-2-01 DF3A-14P-2DS DF3-14P-2DS(01) 543-0192-2 543-0044-5-01 DF3A-15P-2DS DF3-15P-2DS(01) Note : The quantity for delivery is determined per bag(100 pcs.). If needed, please order the products per bag. Number of Contacts A B 2 3 4 5 6 7 8 9 10 11 12 13 14 15 06 08 10 12 14 16 18 20 22 24 26 28 30 32 02 04 06 08 10 12 14 16 18 20 22 24 26 28 A259 ■Straight Pin Header (SMT) BPCB mounting pattern Note : If a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact. [Specific No.] –* *, (* *) (20) :Tin plated tube packaging (50) :Gold plated tube packaging Unit: mm With Boss Without Boss A B C D 543-0207-8-** 2 02 8.5 4.8 8.74 DF3D- 3P-2V(**) 543-0208-0-** 3 04 10.5 6.8 10.74 34 543-0123-0-** DF3D- 4P-2V(**) 543-0209-3-** 4 06 12.5 8.8 12.74 30 543-0124-2-** DF3D- 5P-2V(**) 543-0210-2-** 5 08 14.5 10.8 14.74 26 543-0125-5-** DF3D- 6P-2V(**) 543-0211-5-** 6 10 16.5 12.8 16.74 23 543-0126-8-** DF3D- 7P-2V(**) 543-0212-8-** 7 12 18.5 14.8 18.74 21 543-0127-0-** DF3D- 8P-2V(**) 543-0213-0-** 8 14 20.5 16.8 20.74 19 543-0128-3-** DF3D- 9P-2V(**) 543-0214-3-** 9 16 22.5 18.8 22.74 18 DF3-10P-2V(**) 543-0129-6-** DF3D-10P-2V(**) 543-0215-6-** 10 18 24.5 20.8 24.74 17 DF3-11P-2V(**) 543-0130-5-** DF3D-11P-2V(**) 543-0216-9-** 11 20 26.5 22.8 26.74 15 DF3-12P-2V(**) 543-0131-8-** DF3D-12P-2V(**) 543-0217-1-** 12 22 28.5 24.8 28.74 14 DF3-13P-2V(**) 543-0132-0-** DF3D-13P-2V(**) 543-0218-4-** 13 24 30.5 26.8 30.74 14 DF3-14P-2V(**) 543-0133-3-** DF3D-14P-2V(**) 543-0219-7-** 14 26 32.5 28.8 32.74 13 15 28 34.5 30.8 34.74 12 CL No. Part Number CL No. DF3- 2P-2V(**) 543-0121-4-** DF3D- 2P-2V(**) DF3- 3P-2V(**) 543-0122-7-** DF3- 4P-2V(**) DF3- 5P-2V(**) DF3- 6P-2V(**) DF3- 7P-2V(**) DF3- 8P-2V(**) DF3- 9P-2V(**) DF3-15P-2V(**) DF3D-15P-2V(**) 543-0134-6-** 543-0220-6-** Note : Please order the tube packaging product, multiplying by tube package quantity ( pcs.). A260 Tube Packaging Number of Contacts Part Number Quantity 41 pcs. ■Right Angle Pin Header (SMT) BPCB mounting pattern BTube Size [Specific No.] –* *, (* *) (20) :Tin plated tube packaging (21) :Tin plated embossed packaging (Note the number of contacts for marchandization.) (50) :Gold plated tube packaging (51) :Gold plated embossded packaging ■Number of Contacts for Embossed Packaging Available Numbers of Contacts (21)Tin plated (51)Gold plated (21)Tin plated (51)Gold plated DF3D-*P-2H DF3D-*P-2H 2 3 4 5 K K K K K K K ∞ K K K K ∞ K K K 6 7 8 K ∞ K ∞ K ∞ K K K K K K 9 ∞ ∞ ∞ ∞ 10 11 12 13 14 15 K K K ∞ ∞ K ∞ K K ∞ ∞ K K K K K ∞ K K K K ∞ ∞ ∞ Unit: mm With Boss Without Boss Tube Packaging Quantity Number of Contacts A B C D 543-0221-9-** 2 2 8.5 4.8 8.74 DF3D- 3P-2H(**) 543-0222-1-** 3 4 10.5 6.8 10.74 34 DF3D- 4P-2H(**) 543-0223-4-** 4 6 12.5 8.8 12.74 30 DF3D- 5P-2H(**) 543-0224-7-** 5 8 14.5 10.8 14.74 26 10 16.5 12.8 16.74 23 Part Number CL No. Part Number CL No. DF3- 2P-2H(**) 543-0107-3-** DF3D- 2P-2H(**) DF3- 3P-2H(**) 543-0108-6-** DF3- 4P-2H(**) 543-0109-9-** DF3- 5P-2H(**) 543-0110-8-** 41 pcs. DF3- 6P-2H(**) 543-0111-0-** DF3D- 6P-2H(**) 543-0225-0-** 6 DF3- 7P-2H(**) 543-0112-3-** DF3D- 7P-2H(**) 543-0226-2-** 7 12 18.5 14.8 18.74 21 DF3- 8P-2H(**) 543-0113-6-** DF3D- 8P-2H(**) 543-0227-5-** 8 14 20.5 16.8 20.74 19 DF3- 9P-2H(**) 543-0114-9-** DF3D- 9P-2H(**) 543-0228-8-** 9 16 22.5 18.8 22.74 18 DF3-10P-2H(**) 543-0115-1-** DF3D-10P-2H(**) 543-0229-0-** 10 18 24.5 20.8 24.74 17 DF3-11P-2H(**) 543-0116-4-** DF3D-11P-2H(**) 543-0230-0-** 11 20 26.5 22.8 26.74 15 DF3-12P-2H(**) 543-0117-7-** DF3D-12P-2H(**) 543-0231-2-** 12 22 28.5 24.8 28.74 14 DF3-13P-2H(**) 543-0118-0-** DF3D-13P-2H(**) 543-0232-5-** 13 24 30.5 26.8 30.74 14 DF3-14P-2H(**) 543-0119-2-** DF3D-14P-2H(**) 543-0233-8-** 14 26 32.5 28.8 32.74 13 15 DF3-15P-2H(**) DF3D-15P-2H(**) 543-0120-1-** 543-0234-0-** Note1: Please order the tube packaging product, multipliing the tube package quantity. ( pcs.) Note2: Please order the emboss packaging product by the reel number. (1 reel : 1000 pcs.) 28 34.5 30.8 34.74 12 A261 ■In-line Plug [Specific No.] –* *, (* *) Blank: 1 pack Photo: Contact inserted status Number of Contacts Part Number CL No. A B 02 06 2 DF3- 2EP-2C(**) 543-0064-2-** 04 08 3 DF3- 3EP-2C(**) 543-0065-5-** 06 10 4 DF3- 4EP-2C(**) 543-0066-8-** 08 12 5 DF3- 5EP-2C(**) 543-0067-0-** 10 14 6 DF3- 6EP-2C(**) 543-0068-3-** 12 16 7 DF3- 7EP-2C(**) 543-0069-6-** 14 18 8 DF3- 8EP-2C(**) 543-0070-5-** Note : The specific No."None" item is delivered per bag (100 pcs.). ■In-line Plug with Panel Lock Number of Contacts Part Number CL No. 09 DF3- 9EP-2C(**) 543-0071-8-** 10 DF3-10EP-2C(**) 543-0072-0-** 11 DF3-11EP-2C(**) 543-0073-3-** 12 DF3-12EP-2C(**) 543-0074-6-** 13 DF3-13EP-2C(**) 543-0075-9-** 14 DF3-14EP-2C(**) 543-0076-1-** 15 DF3-15EP-2C(**) 543-0077-4-** Please order products per bag unit. A 20 22 24 26 28 30 32 Unit: mm B 16 18 20 22 24 26 28 BPanel Cutouts Photo: Contact insertion status Number of Contacts Part Number CL No. A B 06 11 2 DF3AA- 2EP-2C(**) 543-0151-5-** 08 13 3 DF3AA- 3EP-2C(**) 543-0152-8-** 10 15 4 DF3AA- 4EP-2C(**) 543-0153-0-** 12 17 5 DF3AA- 5EP-2C(**) 543-0154-3-** 14 19 6 DF3AA- 6EP-2C(**) 543-0155-6-** 16 21 7 DF3AA- 7EP-2C(**) 543-0156-9-** 18 23 8 DF3AA- 8EP-2C(**) 543-0157-1-** 20 25 9 DF3AA- 9EP-2C(**) 543-0158-4-** 22 27 10 DF3AA-10EP-2C(**) 543-0159-7-** 24 29 11 DF3AA-11EP-2C(**) 543-0160-6-** 26 31 12 DF3AA-12EP-2C(**) 543-0161-9-** 28 33 13 DF3AA-13EP-2C(**) 543-0162-1-** 30 35 14 DF3AA-14EP-2C(**) 543-0163-4-** 32 37 15 DF3AA-15EP-2C(**) 543-0164-7-** Note : Specific No."None" item is delivered per bag (100 pcs.). A262 Unit: mm C D E 02 9.4 6.3 Note1: Applicable panel thickness is 1.6 to 1.0mm. (However, a 04 11.4 8.3 slight backlash is considered for 06 13.4 10.3 the thickness other than 1.6 08 15.4 12.3 and 1.2mm.) 10 17.4 14.3 Note2: Use the non-radius surface at 12 19.4 16.3 the hooking panel edge. 14 21.4 18.3 Note3: Contact No. indicates 1, 4, 8, 16 23.4 20.3 12, and 15. 18 25.4 22.3 20 27.4 24.3 22 29.4 26.3 24 31.4 28.3 [Specific No.] –* *, (* *) 26 33.4 30.3 Blank : 100 pcs. per bag 28 35.4 32.3 Please order products per bag unit. ■In-line Adapter with Panel Lock BPanel Cutouts Adapter to in-line by pushing 2 pcs. of socket from both sides No.1-No.1 connection circuit type Unit: mm Number of Contacts A B C DF3- 2EP-2A(**) 543-0267-0-** 2 11 06 DF3- 3EP-2A(**) 543-0268-2-** 3 13 08 DF3- 4EP-2A(**) 543-0269-5-** 4 15 DF3- 5EP-2A(**) 543-0270-4-** 5 17 DF3- 6EP-2A(**) 543-0271-7-** 6 DF3- 7EP-2A(**) 543-0272-0-** 7 DF3- 8EP-2A(**) 543-0273-2-** Part Number CL No. D E 02 9.4 6.3 04 11.4 8.3 10 06 13.4 10.3 12 08 15.4 12.3 19 14 10 17.4 14.3 21 16 12 19.4 16.3 8 23 18 14 21.4 18.3 DF3- 9EP-2A(**) 543-0274-5-** 9 25 20 16 23.4 20.3 DF3-10EP-2A(**) 543-0275-8-** 10 27 22 18 25.4 22.3 DF3-11EP-2A(**) 543-0276-0-** 11 29 24 20 27.4 24.3 DF3-12EP-2A(**) 543-0277-3-** 12 31 26 22 29.4 26.3 DF3-13EP-2A(**) 543-0278-6-** 13 33 28 24 31.4 28.3 DF3-14EP-2A(**) 543-0279-9-** 14 35 30 26 33.4 30.3 Note1: Applicable panel thickness is 1.6 to 1.0mm.(However,backlash will occur except for 1.6, 1.2mm thickness.) Note2: Please use the non-radius surface at the hooking panel edge. [Specific No.] –* *, (* *) Blank : 100 pcs. per bag 15 28 35.4 32.3 37 32 DF3-15EP-2A(**) 543-0280-8-** Note : Specific No."None" item is delivered per bag (100 pcs.). Please order products per bag unit. A263 ■Crimping Contact for Socket Part Number Type CL No. Quantity DF3-22SCF 543-0235-3 Reel contact 10000 pcs. per embossed tape bag DF3-22SC 543-0236-6 Bulk contact DF3-2428SCF 543-0001-2 Reel contact 10000 pcs. per embossed tape bag DF3-2428SC 543-0002-5 Bulk contact DF3-2428SCFC 543-0046-0 Reel contact 10000 pcs. per embossed tape bag DF3-248SCC 543-0047-3 Bulk contact 100 pcs. per embossed tape bag 100 pcs. per embossed tape bag ●Applicable Wire (Tin Plating Annealed Copper Wire) Jacket Diameter AWG 22 (17pcs./0.16mm) Ø1.2 to Ø1.45mm Tin plated per embossed tape bag 100 pcs. Conductor Size (Wire Configuration) Finish Gold plated ●Recommended Wire UL1061, UL1007 (Note 2.) ●Strip Length 1.8 to 2.3mm AWG 24 (11pcs./0.16mm) AWG 26 (7pcs./0.16mm) Ø0.75 to Ø1.45mm AWG 28 (7pcs./0.127mm) Note1: If other wires are used instead of the applicable cable, please contact HRS company. Note2: DF3-22SCF is applicable to UL1061. ■Crimping Contact for In-line Plug CL No. Type DF3-EP2428PCF 543-0062-7 Reel contact 10000 pcs. per reel DF3-EP2428PC 543-0063-0 Bulk contact 100 pcs. per pack DF3-EP2428PCFA 543-0149-3 Reel contact 10000 pcs. per reel DF3-EP2428PCA 543-0150-2 Bulk contact 100 pcs. per pack Part Number Quantity ●Applicable Wire (Tin Plating Annealed Copper Wire) Conductor Size (Wire Configuration) Jacket Diameter Tin plated Gold plated ●Recommended Wire UL1061, UL1007 ●Strip Length 1.9 to 2.5mm AWG 24 (11pcs./0.16mm) AWG 26 (7pcs./0.16mm) Finish Ø0.75 to Ø1.45mm AWG 28 (7pcs./0.127mm) Note1: If other wires are used instead of the applicable cable, please contact HRS company. BApplicable Crimping Tool Type Applicator Press Unit Hand Crimping Tool Extraction Tool Part Number CL No. Applicable Contact AP105-DF3-2428S 901-4503-3 DF3-2428SCF/SCFC AP105-DF3-22S 901-4549-4 DF3-22SCF AP105-DF3-EP2428P 901-4508-7 DF3-EP2428PCF/PCFA CM-105 901-0005-4 ––––––––––––––––––– DF3-TA2428HC 550-0164-5 DF3-2428SC/SCC DF3EP-TA2428HC 550-0184-2 DF3-EP2428PC/PCA DF3-TA22HC 550-0257-4 DF3-22SC DF-C-PO (A) 550-0170-8 DF3-****SCF DF3-EP****PCF Note : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble. A264