EPCOS B44066R6066E230 Film capacitors - power factor correction Datasheet

Film Capacitors – Power Factor Correction
Key components
Series/Type:
Power factor controller series BR6000–T6R6, V5.0
Ordering code: B44066R6**6E230
Date:
Version:
November 2009
1
Content of inside pages of data sheet. Data will be automatically entered into frontpage
headlines, headers and footers. Please fill in the table and then change the colour to “White”.
This ensures that the table disappears for the customer pdf.
Identification/Classification 1:
(header 1)
Film Capacitors – Power Factor Correction
Identification/Classification 2:
(header 2)
Key components
Ordering code:
B44066R6**6E230
Series/Type:
Power factor controller series BR6000–T6R6, V5.0
Preliminary data (optional):
(if necessary)
Preliminary data
Department:
FK PC PM PFC
Date:
November 2009
 EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
Film Capacitors – Power Factor Correction
B44066R6**6E230
Key components
Power factor controller series BR6000–T6R6, V5.0
Preliminary data
Characteristics
 6 transistor outputs for direct triggering of
thyristor modules TSM series for dynamic compensation
 6 relay outputs for direct triggering of capacitor contactors
for conventional compensation
 Intelligent behavior that logically combines both types of
control of the output steps
 Menu driven handling (plain language)
Dutch/English/French/German/Polish/Portuguese/
Russian/Czech/Spanish
 Self-optimizing control capability
 Large measuring voltage range
 Recall function of recorded values (Vmax, kvar, kW, kVA, °C)
 Four-quadrant operation (e.g. standby generator)
 Powerful alarm output
 Control series editor (value perception selectable)
 2nd target power factor
 Interface RS485 optional
Features
Display
System parameters displayed
Alarm output
Recall recorded values
Additional Features
Large and multifunctional LCD
(2 × 16 characters)
- Graphic and alphanumeric
- LCD illumination
- System voltage (V AC)
- Reactive power (kvar)
- Active power (kW)
- Frequency
- Apparent power (kVA)
- Apparent current (A)
- Temperature (°C / °F )
- Real-time cos 
- Target cos 
- kvar value to target cos 
- Display of values also as percentage
- Insufficient compensation
- Overcompensation
- Undercurrent
- Overcurrent
- Overtemperature
- Threshold value programmable
- Maximum voltage, Vmax
- Maximum reactive power, Q (kvar)
- Maximum active power, P (kW)
- Maximum apparent power, S (kVA)
- Maximum temperature, (°C)
- Internal error storage
nd
- 2 signal relay random
- Triggering time programmable
-
FK PC PM PFC
Please read Important notes
at the end of this document.
November 2009
Page 2 of 6
Film Capacitors – Power Factor Correction
B44066R6**6E230
Key components
Power factor controller series BR6000–T6R6, V5.0
Preliminary data
Technical data
Weight
1 kg
Case
Panel-mounted instrument, 144 × 144 × 55 mm
(cut out 138 × 138 mm)
Ambient conditions
Overvoltage class
II
Pollution degree
2
Operating temperature
–20 ... 60 °C
Storage temperature
–20 ... 75 °C
Sensitivity to inference (industrial areas)
EN55082–2.1995
Spurious radiation (residential areas)
EN55011–10.1997
Safety guidelines
IEC61010–1:2001, EN61010–1:2001
Mounting position
Any
Humidity class
15 ... 95% without dew
Protection class
Front plate
IP54 to IEC60529
Rear side
IP20 to IEC60529
Operation
Supply voltage
110 … 230 V AC, 50 and 60 Hz power lines
Target cos 
0.3 inductive to 0.3 capacitive adjustable
Switching and discharge time range
20 ... 1000 ms / 1 … 1200 s
(dynamic / static section)
Number of control series
20 series preset + control series editor for free
programming
Control modes
- Series switching (LIFO),
- Circular switching (FIFO),
- Self-optimized intelligent control mode
Measurement
Measurement voltage range
30 ... 525 V AC (L–N) or (L-L)
Fundamental frequency
50 and 60 Hz
Measurement current (CT)
x/5 and x/1 Ampere possible
Minimum operating current
40 mA / 10 mA
Maximum current
5.3 A (sinusoidal)
Zero voltage release
< 15 ms
FK PC PM PFC
Please read Important notes
at the end of this document.
November 2009
Page 3 of 6
Film Capacitors – Power Factor Correction
B44066R6**6E230
Key components
Power factor controller series BR6000–T6R6, V5.0
Preliminary data
Switching outputs
Output 1… 6: transistor
6 steps (10 ... 24 V DC, 40 mA
Output 7…12: relay
6 steps (230 V AC, 6 A)
Alarm relay
Potential-free contact (max. 250 V, 6 A)
Message relay
Potential-free contact (max. 250 V, 6 A)
2nd target power factor programmable
(activation via external input)
Interface
Optional RS485
Ordering codes
Type
BR6000-T6R6
Voltage
50/60 Hz
V AC
Output
Relay
Alarm
output
Transistor
Switchover Intertarget
face
cos  1/2
110 … 230
6
6
Yes
Yes
BR6000-T6R6/S485 110 … 230
6
6
Yes
Yes
FK PC PM PFC
Please read Important notes
at the end of this document.
No
Ordering code
B44066R6066E230
RS485 B44066R6466E230
November 2009
Page 4 of 6
Film Capacitors – Power Factor Correction
B44066R6**6E230
Key components
Power factor controller series BR6000–T6R6, V5.0
Preliminary data
Connection plan
FK PC PM PFC
Please read Important notes
at the end of this document.
November 2009
Page 5 of 6
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DSSP,
MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
FK PC PM PFC
November 2009
Page 6 of 6
Similar pages