DF15005S THRU DF1510S SINGLE PHASE GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE:50 TO 1000V CURRENT:1.5A FEATURE DBS For surface mount application Reliable low cost construction utilizing molded plastic Technique Surge overload rating:50 A peak MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current at Ta =40°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current per leg 1.5A Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance (1) Typical thermal resistance per leg (2) SYMBOL DF15 005S DF 1501S DF 1502S DF 1504S DF 1506S DF 1508S DF 1510S units Vrrm Vrms Vdc 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V If(av) 1.5 A Ifsm 50.0 A Vf 1.1 V 10.0 500.0 25.0 40 15 -55 to +150 -55 to +150 µA uA Ir Cj RθJA RθJL Tj Tstg Operating Temperature Range Storage and Operating Junction Temperature Note: 1. Measured at 1.0 MHz and applied voltage of 4.0 volt Pf °C/w °C °C 2 . Units mounted on P.C.B. with 0.51 x 0.51" (13 x 13 mm) copper pads Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES DF15005S THRU DF1510S 1 Rev.A2 www.gulfsemi.com