Ecliptek EC3200TET-24.000M-G Oscillator Datasheet

EC32 Series
EC32
• RoHS Compliant (Pb-free)
• Voltage Controlled
Crystal Oscillator (VCXO)
• 3.3V Supply Voltage
• HCMOS/TTL output
• 14 pin DIP package
• Stability to ±20ppm
• Wide frequency and pull range
H 5.08
L 20.8
W 13.2
OSCILLATOR
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
1.000MHz to 44.736MHz
Operating Temperature Range
0°C to 70°C or -40°C to +85°C
Storage Temperature Range
-55°C to +125°C
Supply Voltage (VDD)
3.3VDC ±10%
Aging (at 25°C)
±5ppm / year Maximum
Load Drive Capability
2TTL Load or 15pF HCMOS Load Maximum
10 mSeconds Maximum
Start Up Time
Frequency Deviation /
1.65VDC ±1.65VDC Positive Transfer Characteristic, or
Control Voltage
1.65VDC ±1.65VDC Positive Transfer Characteristic
±50ppm Minimum
±100ppm Minimum
±20% Maximum, ±15% Maximum, or 10% Maximum
Linearity
1.000MHz to 20.000MHz
10mA Maximum
20.001MHz to 44.736MHz
20mA Maximum
Inclusive of Operating Temperature
±100ppm, ±50ppm, ±25ppm, or
Range, Supply Voltage, and Load
±20ppm Maximum (0°C to 70°C Only)
w/TTL Load
2.4VDC Minimum
w/HCMOS Load
2.7VDC Minimum
Output Voltage Logic Low (VOL)
w/TTL Load or w/HCMOS Load
0.4VDC Maximum
Duty Cycle
at 50% of Waveform
50 ±10(%) (Standard)
at 50% of Waveform
50 ±5(%) (Optional)
0.4VDC to 2.4VDC w/TTL Load;
5 nSeconds Maximum
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Rise Time / Fall Time
20% to 80% of Waveform w/HCMOS Load
Period Jitter: Absolute
Period Jitter: One Sigma
±100pSeconds Maximum
±25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC32
14 pin DIP
3.3V
OS46
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC32 00 T A 15 ET - 24.000M - G
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum, 25=±25ppm Maximum
20=±20ppm Maximum
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Full Size Gull Wing (See Page 132)
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
FREQUENCY
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard)
ET=-40°C to 85°C
FREQUENCY DEVIATION
Blank=±50ppm Minimum (Standard)
A=±100ppm Minimum
LINEARITY
Blank=20% Maximum(Standard)
15=15% Maximum
10=10% Maximum
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
MARKING SPECIFICATIONS
Pin 1: Control Voltage (Vc)
Pin 7: Case Ground
Pin 8: Output
Pin 14: Supply Voltage
Line 1: ECLIPTEK
Line 2: EC32
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Series Designator
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
minimum.
Solderability
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
Marking Permanency
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 3: XX.XXX M
Frequency in MHz
(5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Note: Pin 1 shall be designated with a dot
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EC32
14 pin DIP
3.3V
OS46
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
08/06
Specifications subject to change without notice.
EC32 Series
• RoHS Compliant (Pb-free)
• Voltage Controlled Crystal Oscillator (VCXO)
• 3.3V Supply Voltage
• HCMOS/TTL output
• 8 pin DIP package
• Stability to ±20ppm
• Wide frequency and pull range
EC32
H 5.6
L 13.2
W 13.2
OSCILLATOR
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
1.000MHz to 44.736MHz
Operating Temperature Range
0°C to 70°C or -40°C to +85°C
Storage Temperature Range
-55°C to +125°C
Supply Voltage (VDD)
3.3VDC ±10%
Aging (at 25°C)
±5ppm / year Maximum
Load Drive Capability
2TTL Load or 15pF HCMOS Load Maximum
10 mSeconds Maximum
Start Up Time
Frequency Deviation /
1.65VDC ±1.65VDC Positive Transfer Characteristic, or
±50ppm Minimum
Control Voltage
1.65VDC ±1.65VDC Positive Transfer Characteristic
±100ppm Minimum
±20% Maximum, ±15% Maximum, or 10% Maximum
Linearity
Input Current
Frequency Tolerance / Stability
1.000MHz to 20.000MHz
10mA Maximum
20.001MHz to 44.736MHz
20mA Maximum
Inclusive of Operating Temperature
±100ppm, ±50ppm, ±25ppm, or
Range, Supply Voltage, and Load
±20ppm Maximum (0°C to 70°C Only)
2.4VDC Minimum
Output Voltage Logic High (VOH) w/TTL Load
w/HCMOS Load
2.7VDC Minimum
Output Voltage Logic Low (VOL)
w/TTL Load or w/HCMOS Load
0.4VDC Maximum
Duty Cycle
at 50% of Waveform
50 ±10(%) (Standard)
at 50% of Waveform
50 ±5(%) (Optional)
0.4VDC to 2.4VDC w/TTL Load;
5 nSeconds Maximum
Rise Time / Fall Time
20% to 80% of Waveform w/HCMOS Load
Period Jitter: Absolute
±100pSeconds Maximum
Period Jitter: One Sigma
±25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC32
8 pin DIP
3.3V
OS47
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC32 00 HS T A 15 ET - 24.000M - G TR
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum, 25=±25ppm Maximum
20=±20ppm Maximum
PACKAGING OPTIONS
Blank=Bulk (Standard)
TR=Tape & Reel (only offered with
Half Size G and Half Size G2 Options)
PACKAGE
HS=Half Size 8 Pin DIP
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Half Size Gull Wing (See Page 132)
G2=Alternate Half Size Gull Wing (See Page 132)
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
FREQUENCY DEVIATION
Blank=±50ppm Minimum (Standard)
A=±100ppm Minimum
FREQUENCY
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard)
ET=-40°C to 85°C
LINEARITY
Blank=20% Maximum(Standard)
15=15% Maximum, 10=10% Maximum
MECHANICAL DIMENSIONS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1 Locator for Gull Wing
(1) For “G” Option
(2) For “G2” Option
Pin 1: Control Voltage (Vc)
Pin 4: Case Ground
Pin 5: Output
Pin 8: Supply Voltage
MARKING SPECIFICATIONS
Line 1: ECLIPTEK
Line 2: EC32
Series Designator
250 Pieces Per Reel
Compliant to EIA-481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Line 3: XX.XXX M
Frequency in MHz
(5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER subject to
CATEGORY
SERIES
Specifications
change without notice.
ECLIPTEK CORP.
OSCILLATOR
EC32
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum.
Solderability
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
Marking Permanency
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz
within 1 minute (approximately) for 2 hours minimum on each axis
(X, Y and Z) for a total of 6 hours.
##
800-ECLIPTEK www.ecliptek.com for latest revision
PACKAGE
VOLTAGE
8 pin DIP
3.3V
CLASS
1-800-ECLIPTEK
OS47
REV.DATE
WWW.ECLIPTEK.COM
08/06
Specifications subject to change without notice.
Similar pages