ZETTLER AZ2280-1AT-6DF 30 amp miniature power relay Datasheet

AZ2280
30 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
Quick-connect leads for contacts and coil
1 Form A, B and C contacts available
AC and DC coils available
Epoxy sealed versions available
UL Class F (155°C) standard
UL, CUR file E44211
VDE certificate 40027037
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
SPST (1 Form B)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. N.O.
Ratings
Resistive load:
Operate Time
15 ms max. at nominal coil voltage
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 28 VDC or 277 VAC
Release Time
10 ms max. at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
2500 Vrms coil to contact
1500 Vrms between open contacts
Insulation Resistance
1000 megaohms min. at 20°C,
500 VDC 50% RH
Dropout
DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
1 Form A
1 Form B
1 Form C
Max. switched power: 280 W or 4155VA
Max. switched current: 15 A
Max. switched voltage: 28 VDC or 277 VAC
Max. switched power:
560 W or 8310 VA (N.O.)
280 W or 5540 VA (N.C.)
Max. switched current: 30 A (N.O.)
20 A (N.C.)
Max. switched voltage: 28 VDC or 277 VAC
Ambient Temperature
Operating
-40°C (-40°F) to 85°C (185°F), DC coils
-40°C (-40°F) to 70°C (158°F), AC coils
Material
Silver cadmium oxide [1], silver tin oxide [2]
Vibration
1.5 mm DA at 10-55 Hz
Resistance
< 50 milliohm initially
(24 V, 1A voltage drop method)
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, Quick Connects
COIL
Power
At Pickup Voltage
(typical)
500 mW, DC coil
1.4 VA, AC coil
Note: Allow suitable slack on leads when
wiring, and do not subject the terminals
to excessive force.
Max. Solder Temp.
270°C (518°F)
Max. Continuous
Dissipation
1.7 W at 20°C (68°F) ambient, DC coil
2.7 VA at 20°C (68°F) ambient, AC coil
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Temperature Rise
38°C (68°F) at nominal coil voltage
Max. Immersion Time
30 seconds
155°C (311°F)
Weight
36 grams
Packing unit in pcs
40 per plastic tray / 240 per carton
Max. Temperature
NOTES
1.
2.
3.
4.
5.
All values at 20°C (68°F)
Relay may pull in with less than “Must Operate” value.
AC coils are not VDE approved
18 VDC coil is not VDE approved.
Specification subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2280
CONTACTS
Rated load
UL
Rated load
VDE
1 Form A
30 A at 277 VAC, General Use, 6k cycles [1][2]
30 A at 28 VDC, resistive, 6k cycles [1]
28 A at 277 VAC, General Use, 100k cycles [1]
20 FLA / 60 LRA at 277 VAC, 30k cycles [1]
2 HP at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
1 Form A, DC coils only
30 A at 250 VAC, resistive, 30k cycles [1]
15 A at 250 VAC, cos phi = 0.4, 100k cycles [1][2]
1 Form B, DC coils only
15 A at 250 VAC, resistive, 30k cycles [1]
1 Form C, (N.O.), DC coils only
30 A at 250 VAC, resistive, 30k cycles [1]
20 A at 250 VAC, resistive, 100k cycles [2]
1 Form B
15 A at 277 VAC, General Use, 6k cycles [1]
10 A at 28 VDC, resistive, 6k cycles [1]
10 FLA / 33 LRA at 277 VAC, 30k cycles [1]
0.5 HP at 250VAC [1]
0.25 HP at 125 VAC [1]
1 Form C, (N.C.), DC coils only
15 A at 250 VAC, resistive, 30k cycles [1]
10 A at 250 VAC, resistive, 100k cycles [2]
1 Form C, (N.O.)
30 A at 277 VAC, General Use, 6k cycles [1][2]
20 A at 277 VAC, General Use, 6k cycles [1]
20 A at 28 VDC, resistive, 6k cycles [1]
20 FLA / 60 LRA at 277 VAC, 30k cycles [1]
2 HP at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
Note: 18 VDC coil is not VDE approved.
AC coils are not VDE approved.
1 Form C, (N.C.)
20 A at 277 VAC, General Use, 6k cycles [1][2]
10 A at 28 VDC, resistive, 6k cycles [1]
10 FLA / 33 LRA at 277 VAC, 30k cycles [1]
0.5 HP at 250 VAC [1][2]
0.25 HP at 125 VAC [1][2]
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Nominal Current
mA ± 10%
Coil Resistance
Ohm ± 10%
ORDER NUMBER*
5
3.75
6.4
185
27
AZ2280-1AT-5DF
6
4.5
7.8
150
40
AZ2280-1AT-6DF
9
6.75
12.2
93
97
AZ2280-1AT-9DF
12
9.0
15.4
77
155
AZ2280-1AT-12DF
15
11.25
19.8
59
256
AZ2280-1AT-15DF
18
13.5
24.1
47
380
AZ2280-1AT-18DF
24
18.0
32.0
36
660
AZ2280-1AT-24DF
48
36.0
62.6
19
2,560
AZ2280-1AT-48DF
COIL SPECIFICATIONS – AC Coil 50/60 Hz
Nominal Coil
VDC
Must Operate
VDC
ORDER NUMBER*
Max. Continuous
VDC
Nominal Coil
Power VA
Coil Resistance
Ohm ± 10%
12
9.6
13.8
2.3
25
AZ2280-1AT-12AF
24
19.2
27.6
2.1
100
AZ2280-1AT-24AF
120
96.0
138.0
2.3
2,500
AZ2280-1AT-120AF
220
176.0
286.0
2.2
13,490
AZ2280-1AT-220AF
240
192.0
286.0
2.6
13,490
AZ2280-1AT-240AF
277
220.0
318.5
2.2
15,000
AZ2280-1AT-277AF
* “1AT” denote silver cadmium oxide contacts.
Substitute “1BT” in place of “1AT” for 1 Form B relay.
Substitute “1CT” in place of “1AT” for 1 Form C relay.
Substitute “1AET” or “1CET” in place of “1AT” or “1CT” for silver tin oxide contacts.
Substitute “DEF” or “AEF” for epoxy sealed version.
Add suffix “K ”at the end of order number for 0.11 x 0.02 [2.8 x 0.5] coil terminals.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2280
MECHANICAL DATA
1.08
(27.5)
1.09
(27.8)
3 x 0.25 x 0.032
[6.3 x 0.8]
1.27
1.98 1.71 (32.4)
(50.2) (43.5)
2 x 0.187 x 0.02*
[4.8 x 0.5]
0.14
(3.5)
* "K" = 0.110 x .02 [2.8 x 0.5]
WIRING DIAGRAMS (Top View)
Form A
Form B
Form C
3
3
2
2
4
1
5
4
4
1
1
5
5
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
Similar pages