RN4910 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) Silicon NPN Epitaxial Type (PCT Process) RN4910 Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications Unit: mm l Includeing two devices in US6 (ultra super mini type with 6 leads) l With built-in bias resistors l Simplify circuit design l Reduce a quantity of parts and manufacturing process Equivalent Circuit and Bias Resister Values R1: 4.7kΩ (Q1, Q2 Common) Q1 Maximum Ratings (Ta = 25°°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO −50 V Collector-emitter voltage VCEO −50 V Emitter-base voltage VEBO −5 V IC −100 mA Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 5 V IC 100 mA Collector current JEDEC EIAJ TOSHIBA Weight: 6.8mg ― ― 2-2J1A Q2 Maximum Ratings (Ta = 25°°C) Characteristic Collector current 1 2001-06-07 RN4910 Q1, Q2 Common Maximum Ratings (Ta = 25°°C) Characteristic Collector power dissipation Junction temperature Storage temperature range * Symbol Rating Unit PC * 200 mW Tj 150 °C Tstg −55~150 °C Total rating Marking Equivalent Circuit (Top View) 2 2001-06-07 RN4910 Q1 Electrical Characteristics (Ta = 25°C) Symbol Test Circuit Collector cut-off current ICBO ― Emitter cut-off current IEBO DC current gain Characteristic Collector-emitter saturation voltage Transition frequency Collector output capacitance Test Condition Min Typ. Max Unit VCB = −50V, IE = 0 ― ― −100 nA ― VEB = −5V, IC = 0 ― ― −100 mA hFE ― VCE = −5V, IC = −1mA 120 ― 400 ― VCE (sat) ― IC = −5mA, IB = −0.25mA ― −0.1 −0.3 V fT ― VCE = −10V, IC = −5mA ― 200 ― MHz Cob ― VCB = −10V, IE = 0, f = 1MHz ― 3 6 pF Min Typ. Max Unit Q2 Electrical Characteristics (Ta = 25°C) Symbol Test Circuit Collector cut-off current ICBO ― VCB = 50V, IE = 0 ― ― 100 nA Emitter cut-off current IEBO ― VEB = 5V, IC = 0 ― ― 100 mA DC current gain hFE ― VCE = 5V, IC = 1mA 120 ― 700 ― VCE (sat) ― IC = 5mA, IB = 0.25mA ― 0.1 0.3 V fT ― VCE = 10V, IC = 5mA ― 250 ― MHz Cob ― VCB = 10V, IE = 0, f = 1 MHz ― 3 6 pF Characteristic Collector-emitter saturation voltage Transition frequency Collector output capacitance Test Condition Q1, Q2 Common Electrical Characteristics (Ta = 25°C) Characteristic Input resistor Symbol Test Circuit Test Condition Min Typ. Max Unit R1 ― ― 3.29 4.7 6.11 kΩ 3 2001-06-07 RN4910 Q1 4 2001-06-07 RN4910 Q2 5 2001-06-07 RN4910 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 6 2001-06-07