Packaging Information www.vishay.com Vishay General Semiconductor Packaging Information PACKAGING ORDERING CODE PREFERRED ANTI-STATIC PACKAGE CODE PACKAGE CODE 51 52, 52T P 2D P 2E 2M 2N 53 54 P 5A, 5AT P 5B, 5BT P 5CA P 57, 57T P 6A P 6B P 9A, 9AT P 61, 61T P 67A P 72 P 73 77 P 80 P 81 P 8A P 8W P 83 P 84A P 85A P 86A P 87A P 38 89A P 90 91 92 93 45 P 4W P 96 P 97 P 98 P 100 Bulk DO-214AA (SMB)/DO-215AA (SMBG), 12 mm tape, 7" diameter plastic reel DO-218AB (SM5-8A), 24 mm tape, 13" diameter plastic reel, anode towards sprocket hole DO-218AB (SM5-8A), 24 mm tape, 13" diameter plastic reel, cathode towards sprocket hole Tube packaging for 5KP/6KA type lead formed components DO-218AB, 24 mm tape, 13 "diameter plastic reel with dry packaging, anode towards sprocket hole 26 mm horizontal taping and ammo box packaging 52.4 mm horizontal tape, 13" diameter paper reel DO-214AC (SMA), 12 mm tape, 13" diameter plastic reel DO-214AA (SMB)/DO-215AA (SMBG), 12 mm tape, 13" diameter plastic reel DO-214BA (GF1), 12 mm tape, 13" diameter plastic reel DO-214AB (SMC)/DO-215AB (SMCG), 16 mm tape, 7" diameter plastic reel DO-221AC (SlimSMA), 12 mm tape, 7"diameter plastic reel DO-221AC (SlimSMA), 12 mm tape, 13"diameter plastic reel DO-214AB (SMC)/DO-215AB (SMCG), 16 mm tape, 13" diameter plastic reel DO-214AC (SMA), 12 mm tape, 7" diameter plastic reel DO-214BA (GF1), 12 mm tape, 7" diameter plastic reel Bulk pack for bridge and special axial-leaded formed devices 52.4 mm horizontal tape and ammo box packaging DFS bridge, 16 mm tape, 13" diameter paper reel TO-269AA (MB-S) bridge, 12 mm tape, 13" diameter paper reel TO-263AB 24 mm tape, 13" diameter reinforced hub plastic reel SMPD, 24 mm tape, 13" diameter plastic reel TO-263AB (wire bond) 24 mm tape, 13" diameter reinforced hub plastic reel DO-213AA (GL34) 8 mm tape, 13" diameter plastic reel DO-220AA (SMP) 12 mm tape, 7" diameter plastic reel DO-220AA (SMP) 12 mm tape, 13" diameter plastic reel TO-277A (SMPC), 12 mm tape, 7" diameter plastic reel TO-277A (SMPC), 12 mm tape, 13" diameter plastic reel Lead forming bulk packaging in anti-static bags MicroSMP, 8 mm tape, 7" diameter plastic reel Euroform, reel, cathode first off reel, lead coated Euroform, ammo pack, cathode first out of ammo pack, lead coated Euroform, reel, cathode last off reel, lead coated Euroform, ammo pack, cathode last out of ammo pack, lead coated Anti-static tube packaging for Bridge and Power Pack Anti-static tube packaging for wire bond TO-220, ITO-220, TO-262 and TO-263 DO-213AB (GL41), 12 mm tape, 7" diameter plastic reel DO-213AB (GL41), 12 mm tape, 13" diameter plastic reel DO-213AA (GL34), 8 mm tape, 7" diameter plastic reel MPG06 pseudo radial tape, cathode first out of ammo pack H P Tape in 7" diameter plastic reel I P Tape in 13" diameter plastic reel TR TR3 P P DO-214AC (SMA), 12 mm tape, 7" diameter plastic reel (1) DO-214AC (SMA), 12 mm tape, 13" diameter plastic reel (1) PACKAGING DESCRIPTION Notes (1) Formerly sold by Vishay Telefunken® (Telefunken® is a registered trademark of Electro Holding GmbH). • “P” and bold letter denotes preferred package code. • A “T” suffix added to the packaging codes for SMA, SMB and SMC products indicates that the patented folded-frame construction is used. This does not apply to TR and TR3 codes or TRANSZORB® TVS in SMA and SMB. Revision: 01-Feb-13 Document Number: 88869 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor BULK PACKAGING PREFERRED PACKAGE CODE PACKAGING DF-M, DF-S, DFL-S 45 GSIB-3S CASE TYPES BOX SIZE QUANTITY INCHES cm EA. Anti-static plastic tubes 17.4 length 44.1 length 50 45 Anti-static plastic tubes 25.1 length 63.9 length 20 GSIB-5S, PB 45 Anti-static plastic tubes 24.2 length 61.5 length 20 GBU, BU 45 Anti-static plastic tubes 18.5 length 47 length 20 GBL 45 Anti-static plastic tubes 17.5 length 44.5 length 20 KBPM 45 Anti-static plastic tubes 18.5 length 47 length 30 45, 4W Anti-static plastic tubes 21.0 length 53.7 length 50 TO-247AD 45 Anti-static plastic tubes 20.0 length 50.8 length 30 TO-269AA (MB-S) 45 Anti-static plastic tubes 20.3 x 0.41 51.5 x 1.04 100 KBPM 51 Anti-static PVC tray 12.5 x 6.5 x 1.25 31.7 x 16.5 x 3.17 600 GBL 51 Anti-static PVC tray 12.5 x 6.1 x 1.0 30.9 x 15.5 x 2.5 400 GBPC12-35W 51 Paper box 12.5 x 12.5 x 1.7 31.7 x 31.7 x 4.3 100 GBPC1, GBPC6 51 Paper box 7.5 x 7.5 x 1.43 19.0 x 19.0 x 3.6 100 KBL 51 Anti-static PVC tray 12.2 x 6.1 x 1.5 30.9 x 15.5 x 3.8 300 GBPC12-35 51 Paper box 12.5 x 12.5 x 1.7 31.7 x 31.7 x 4.3 100 KBU4, 6, 8 51 Anti-static PVC tray 12.2 x 6.1 x 1.5 30.9 x 15.5 x 3.8 250 WOG, 2WOG 51 Plastic bags - - 100 GBU, /BU 51 Paper tray 13.1 x 6.6 x 1.2 33.2 x 17.2 x 3.0 250 KBPM 72 Paper box 7.4 x 7.4 x 1.5 18.8 x 18.8 x 3.8 200 TO-220AB/AC, ITO-220AC/AB, TO-262AA Revision: 01-Feb-13 Document Number: 88869 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor AXIAL-LEADED TAPE AND REEL PACKAGING Inspection Hole (Both Sides) A C Ammo Pack can be Opened on Either Side, Depending on Desired Device Polarity B All axial-leaded devices are packed in accordance with EIA standard RS-296-E. The diagrams given below refer to these specifications. TABLE 1 - AMMO PACK PACKAGING PACKAGING 26 mm horizontal tape, ammo pack 52 mm horizontal tape, ammo pack AVAILABLE PRODUCT OUTLINES DO-204AL (DO-41), MPG06 DO-204AC P300 DO-204AL, MPG06 DO-204AC DO201AD, GP20 P600 PREFERRED PACKAGE CODE 53 53 53 73 73 73 73 GP10-E, RGP10-E, GP10-E, RGP10-E MPG06 Radial (avisert, panasert, euroform) vertical tape Pseudo/radial tape, ammo pack DIMENSION DIMENSION DIMENSION A B C 9.7" (247 mm) 1.7" (44 mm) 3.7" (95 mm) 10.0" (255 mm) 3.15" (80 mm) 4.53" (115 mm) 91, 93 13.4" (340 mm) 1.8" (47 mm) 7.9" (200 mm) 100 13.4" (340 mm) 1.8" (47 mm) 7.9" (200 mm) QUANTITY BOX 3.0K 1.5K 0.75K 3.0K 2.0K 1.0K 0.3K 2.0K 2.5K 2.0K 2.0K |D1 - D2| = 1.4 (0.055) Max. 0.8 (0.031) Max. Typ. 0.0 D1 D2 K C S A 0.8 (0.031) Max. E P E D Dia. (Table 2) Anode Lead White Tape B 6.0 ± 0.4 T (0.236 ± 0.0157) W Dimensions A, M, K, P, S and T apply to both sides Dimensions in millimeters (inches) Description Symbol Component Pitch A 2, 3 Inside Tape Spacing B 2, 3 Lead to Lead Eccentricity |D1 - D2| Lead Extension K Lead Bending E 2 Cumulative Pitch P 3 Exposed Adhesive S Tape Width T All polarized components shall be oriented in the same direction Fig. 1 Revision: 01-Feb-13 91.9 (3.62) Dia. 50.8 (2.00) Dia. 38.1 (1.50) Dia. 14.3 (0.56) Dia. Kraft Paper Cathode Lead Colored Tape The “C” dimension of Fig. 2 is between flanges of the component reel and shall be 1.5 mm (0.059") to 8.00 mm (0.315") greater than the overall taped component width “W” (Fig. 1). Where “W” dimension is 68.2 mm (2.68") max. Fig. 2 Document Number: 88869 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor AXIAL-LEADED TAPE AND REEL PACKAGING TABLE 2 - REEL AND AMMO PACK TAPING SPECIFICATIONS COMPONENT PITCH “A” Fig. 1 INSIDE TAPE SPACING “B” Fig. 1 PREFERRED PACKAGE CODE UNITS PER REEL EA. INCHES mm INCHES mm INCHES mm INCHES mm 1.5KA (PAR) 54 1400 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2 DO-204AC 54 4000 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2 DO-201AD 54 1400 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2 DO-204AL 54 5500 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2 COMPONENT CASE TYPE DFS Surface Mount REEL DIMENSION “D” Fig. 2 LEAD BENDING “E” Fig. 1 77 1500 - - 13.0 330 Fig. 13 - DO-214BA (GF1) 67A/5CA 1500/6500 - - 7.0/13.0 178/330 Fig. 13 - DO-213AA (GL34) 98/83 2500/9000 DO-213AB (GL41) 96/97 1500/5000 GP10E Radial Fig. 13 - - 7.0/13.0 178/330 Fig. 13 - - - 7.0/13.0 178/330 Fig. 13 - Fig. 7 and Fig. 8 2500 0.500 12.7 - - 13.0 330 0.079 2.0 GP10E 54 5500 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2 GP20/1.5KE 54 1400 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2 MPG06 100 5500 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2 P600 54 800 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2 84A/85A 3000/10 000 - - 7.0/13.0 178/330 Fig. 13 - 8A 2000 - - 13.0 330 Fig. 13 - DO-220AA (SMP) SMPD MicroSMP 89A 4500 - - 7.0 178 Fig. 13 - TO-277A (SMPC) 86A/87A 1500/6500 - - 7.0/13.0 178/330 Fig. 13 - DO-214AC (SMA) 61, 61T, TR/5A, 5AT, TR3 1800/7500 - - 7.0/13.0 178/330 Fig. 13 - - - 7.0/13.0 178/330 Fig. 13 - 850/3500 - - 7.0/13.0 178/330 Fig. 13 - 750 - - 13.0 330 Fig. 13 - DO-214AA (SMB)/ 52, 52T/5B, 5BT DO-215AA (SMBG) DO-214AB (SMC)/ 57T/9AT DO-215AB (SMCG) 750/3200 Fig. 13 DO-218AB 2D TO-263AB 81, 8W 800 - - 13.0 330 Fig. 13 - 80 3000 - - 13.0 330 Fig. 13 - 6A/6B 3500/14 000 - - 7.0/13.0 178/330 Fig. 13 - TO-269AA (MB-S) DO-221AC (SlimSMA) Note • Package codes, 61/5A, 52/5B are matrix-frame constructions for TRANSZORB® TVS in SMA and SMB only. TABLE 3 - COMPONENT AND INSIDE HORIZONTAL TAPE SPACING COMPONENT BODY DIAMETER COMPONENTS SPACING A (LEAD TO LEAD) INSIDE TAPE SPACING "B" 0 mm to 5 mm (0.0" to 0.197") 5.0 mm ± 0.5 mm (0.197" ± 0.020") 26 mm + 1.5 mm/- 0.0 mm (1.024" + 0.059"/- 0.0") 0 mm to 5 mm (0.0" to 0.197") 5.0 mm ± 0.5 mm (0.197" ± 0.020") 52.4 mm + 1.5 mm/- 0.4 mm (2.062" + 0.059"/- 0.016") 5.01 mm to 10 mm (0.197" to 0.394") 10 mm ± 0.5 mm (0.394" ± 0.020") 52.4 mm + 1.5 mm/- 0.4 mm (2.062" + 0.059"/- 0.016") Revision: 01-Feb-13 CUMULATIVE PITCH TOLERANCE Not to exceed 1.5 mm (0.059") over 6 consecutive components Document Number: 88869 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor DIMENSIONS in millimeters (inches) 12.7 (0.50) (Nominal) 7.35 (0.29) 5.35 (0.21) ± 1.0 (2) (± 0.039) 1.0 MAX. (2) (0.40) (Center to Center) 32.0 (1.26) 23.0 (0.905) 5.68 (0.224) 4.68 (0.184) 12.0 MAX. (Center to Center) (0.472) 2.72 (0.107) 2.03 (0.080) Body DIA. 6.5 MAX. (0.256) A (1) 20.5 18.5 (0.807) (0.728) 16.5 (0.650) 15.5 (0.610) Tape B (1) 2.5 11.0 MAX. MIN. (0.433) (0.098) Note: (1) Measurement difference between leads, A and B = 0.4 (0.016) MAX. (2) Component Alignment 0.65 (0.0256) 0.55 (0.022) Lead DIA. 0.6 MAX. (0.024) 9.75 (0.384) 8.50 (0.335) 4.3 (0.169) 3.7 (0.146) DIA. 4.55 (0.179) 3.15 (0.124) 19.0 (0.748) 17.5 (0.689) 13.5 (0.531) 12.5 (0.492) 13.0 (0.512) 12.4 (0.488) (Center to Center) 0.6 (0.025) 0.4 (0.016) User Direction Feed Available for GP10 Products only Utilizing 0.65 mm (0.025") Diameter Leads for Euroform tape by adding suffix “E” (GP10GE, 1N4004GPE). Lead coating is standard. Fig. 3 - Euroform 12.7 (0.50) (Nominal) ± 1.0 (1) (± 0.039) 1.0 MAX. (1) (0.40) (Center to Center) 5.68 (0.224) 4.68 (0.184) 6.5 MAX. (0.256) (Center to Center) 5.5 MIN. (0.217) 32.0 (1.26) 23.0 (0.905) 16.0 MIN. (0.630) 0.86 (0.034) 0.55 (0.022) Lead DIA. 1.3 MIN. (0.059) 16.5 (0.650) Tape 15.5 (0.610) 11.0 MAX. (0.433) 9.75 (0.384) 8.50 (0.335) 4.3 (0.169) 3.7 (0.146) DIA. Note: (1) Component Alignment 2.72 (0.107) 2.03 (0.080) Body DIA. 7.0 MIN. (0.276) 4.55 (0.179) 3.15 (0.124) (Center to Center) 0.6 (0.025) 0.4 (0.016) 19.0 (0.748) 17.5 (0.689) User Direction Feed 13.0 (0.512) 12.4 (0.488) Fig. 4 - Panasert Revision: 01-Feb-13 Document Number: 88869 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor DIMENSIONS in millimeters (inches) ± 1.0 (1) (± 0.039) 1.0 MAX. (1) (0.40) 12.7 (0.50) (Nominal) (Center to Center) 5.68 (0.224) 4.68 (0.184) (Center to Center) 32.0 (1.26) 23.0 (0.905) 2.72 (0.107) 2.03 (0.080) Body DIA. 6.5 MAX. (0.256) 5.5 MIN. (0.217) Tape 16.0 MIN. (0.630) 0.86 (0.034) 0.55 (0.022) Lead DIA. 3.0 MAX. (0.118) 16.5 (0.650) 15.5 (0.610) 11.0 MAX. (0.433) 9.75 (0.384) 8.50 (0.335) 0.6 (0.025) 0.4 (0.016) 4.55 (0.179) 3.15 (0.124) 19.0 (0.748) 17.5 (0.689) 4.3 (0.169) 3.7 (0.146) (Center to Center) 13.0 (0.512) 12.4 (0.488) Note: (1) Component Alignment User Direction Feed Available only for GP10 style products utilizing 0.65 mm (0.025") or 0.76 mm (0.030") diameter leads for Panasert and Avisert tape. Lead coating is available on GP10 products only. Standard Polarity Cathode Oriented Away from Sprocket Holes (Optional Polarity Cathode Oriented Toward Sprocket Holes) Fig. 5 - Avisert 1.0 MAX. (1) (0.40) 2.54 (0.01) 2.29 (0.090) Body DIA. 12.7 (0.50) (Nominal) 0.66 (0.026) 0.55 (0.022) Lead DIA. (Center to Center) 3.2 (0.125) 2.9 (0.115) ± 1.0 (1) (± 0.039) 1.0 (0.039) MAX. 16.0 (0.63) MIN. Tape 11.0 (4.33) MAX. 9.75 (0.384) 8.50 (0.335) 3.06 (0.118) MAX. 12.5 (0.492) MIN. 0.6 (0.025) 0.4 (0.016) 19.0 (0.748) 17.5 (0.689) 2.0 (0.079) MAX. 4.51 (0.178) 3.11 (0.122) Note: (1) Component Alignment 13.0 (0.51) 12.4 (0.49) 4.3 (0.169) 3.7 (0.146) 5.68 (0.224) DIA. 4.68 (0.184) User Direction Feed Available only for MPG06 Product in Ammo Pack in Accordance with EIA Standard RS-468-A Utilizing 0.61 mm (0.024") Diameter Leads. Maximum Cumulative Pitch Tolerance: 1.0 mm (0.039")/20 Pitch. Fig. 6 - Pseudo Radial Revision: 01-Feb-13 Document Number: 88869 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor RADIAL TAPE PACKAGING PKG91 PKG93 PKG90 PKG92 Fig. 7 and Fig. 8 - Reel and Ammo Box Packaging PREFERRED PACKAGE CODE EUROFORM PKG90, PKG91, PKG92, PKG93 “C” Arbor Hole DIA. 30 ± 5 ID (1.181 ± 0.197) Core DIA. 34.9 to 102 (1.37 to 4.02) 55 (2.17) MAX. 330 (13.0) MAX. Fig. 9 - Reel Dimensions Notes • “C” dimension between the reel flanges shall be governed by the overall width of the taped components and shall be 1.5 mm (0.057") to 8.0 mm (0.315") greater than the overall width • All leaded devices are packaged in accordance with EIA standard RS-468-A specification and are available on reel or in fan fold box (ammo pack) • All dimensions are in millimeters and (inches). The above packaging is only available from Taiwan. Revision: 01-Feb-13 Document Number: 88869 7 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor SURFACE MOUNT TAPE AND REEL PACKAGING Tape with Components shall Pass Around Bending Radius without Damage, for Reels with Hub Diameters Approaching Minimum Dimension Top Cover Tape Thickness: 0.10 mm (0.004") Max. Bending Radius R Ref. Fig. 11 Embossed Carrier Tape G Component Cavity N A B D T C Fig. 10 Fig. 12 DIMENSIONS in millimeters (inches) A MAX. B MIN. C D MIN. N MIN. G MAX. T MAX. 8 mm (0.315) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 1.5 (0.059) 13.0 ± 0.20 (0.51 ± 0.0008) 20.2 (0.795) 50 (1.97) 9.9 (0.389) 14.4 (0.567) 12 mm (0.472) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 1.5 (0.059) 13.0 ± 0.20 (0.51 ± 0.0008) 20.2 (0.795) 50 (1.97) 14.4 (0.567) 18.4 (0.724) 16 mm (0.630) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 1.5 (0.059) 13.0 ± 0.20 (0.51 ± 0.0008) 20.2 (0.795) 50 (1.97) 18.4 (0.724) 22.4 (0.802) 24 mm (0.945) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 1.5 (0.059) 13.0 ± 0.20 (0.51 ± 0.0008) 20.2 (0.795) 50 (1.97) 26.4 (1.039) 30.4 (1.197) TAPE SIZE Revision: 01-Feb-13 Document Number: 88869 8 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor SURFACE MOUNT TAPE AND REEL PACKAGING De-Reeling Direction P0 10 P0itches Cumulative Tolerance on Tape ± 0.2 P2 T2 T TVS Polarization D0 E Top Cover Tape A0 (2) F GL41, SMA, SMB, SMC, SMP, MicroSMP, SMPC, SlimSMA, DO-218AB/2E W K0 B1 (1) E2 B0 Rectifiers Polarization S1 T1 P1 Notes (1) For machine reference only, including draft and radii concentric around B0 (2) D1 for components 2.0 mm x 1.2 mm and larger DFS and MBS Polarization DO-218AB/2D See note 1 and table Fig. 13 8 mm, 12 mm, 16 mm, AND 24 mm EMBOSSED TAPE in millimeters (inches) TAPE SIZE 8 mm, 12 mm 16 mm, 24 mm D0 E1 P0 1.5 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 (0.059 ± 0.004) (0.069 ± 0.004) (0.157 ± 0.004) P2 A0, B0, K0 S1 MIN. T MAX. T1 MAX. 2.0 ± 0.05 (0.79 ± 0.002) 2.0 ± 0.1 (0.79 ± 0.004) (1) 0.6 (0.024) 0.600 (0.024) 0.1 (0.004) DIMENSIONS in millimeters (inches) CASE TYPE DO-213AA (GL34) MicroSMP TAPE SIZE 8 (0.315) B1 MAX. D1 MIN. 4.2 (0.165) 3.28 (0.129) 1.0 (0.39) E2 MAX. F 6.25 (0.246) 6.05 (0.238) 3.5 ± 0.05 (0.138 ± 0.002) DO-213AB (GL41) DO-220AA (SMP) DFS TO-263AB DO-218AB SMPD DO-221AC (SlimSMA) 25 (0.984) 8.2 (0.323) 12 (0.472) 10.25 (0.404) 7.0 (2.76) 8.2 (0.323) TO-277A (SMPC) DO-214AA (SMB)/ DO-215AA (SMBG) DO-214AB (SMC)/ DO-215AB (SMCG) R REF. 4.0 ± 0.10 (0.57 ± 0.004) DO-214BA (GF1) DO-214AC(SMA) P1 5.5 ± 0.05 (0.217 ± 0.002) 1.5 (0.059) 8.0 ± 0.10 30 (0.315 ± 0.004) (1.181) 16 (0.630) 12.1 (0.476) 14.25 (0.561) 24 (0.945) 20.1 (0.791) 22.25 (0.876) 12 (0.472) 6.2 (0.244) 1.5 (0.059) 10.25 (0.404) 7.5 ± 0.05 (0.295 ± 0.002) 12.0 ± 0.10 (0.472 ± 0.004) 16.0 ± 0.10 11.5 ± 0.1 (0.630 ± 0.004) (0.453 ± 0.004) 12.0 ± 0.10 (0.472 ± 0.004) 5.5 ± 0.05 4.0 ± 0.10 (0.217 ± 0.002) (0.157 ± 0.001) T2 MAX. 2.4 (0.094) 1.919 (0.076) 4.5 (0.177) 3.25 (0.128) 2.64 (0.104) 1.84 (0.072) 1.43 (0.056) 2.77 (0.109) 2.64 (0.104) 3.91 (0.154) 5.31 (0.209) 2.35 (0.093) 1.53 (0.060) W 8.0 ± 0.30 (0.315 ± 0.012) 12.0 ± 0.30 (0.472 ± 0.012) 16.0 ± 0.2 (0.630 ± 0.008) 24.0 ± 0.3 (0.945 ± 0.008) 12.0 ± 0.3 (0.472 ± 0.012) Notes (1) A , B , and K are determined by the maximum dimensions of the component size. The clearance between the component and the cavity 0 0 0 must be within 0.05 mm (0.002") min. to 0.5 mm (0.02") max. for 8 mm tape and 12 mm tape, 0.15 mm (0.066") min. to 0.90 mm (0.035") max. for 16 mm tape and 0.15 mm (0.006") min. to 1.0 mm (0.59") max. for 24 mm tape. (2) All surface mount components are packed in accordance with EIA standard 481-C Revision: 01-Feb-13 Document Number: 88869 9 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000