AKL Enclosures are very similar to their door bearing cousins, the AKII. The main feature that differentiates this family from the AKII is the configuration of the covers and bases. The AKL Series, like the AKII Series, features aesthetically pleasing smooth exterior walls. Knockout patterns are on the inside, with identical tops and bottoms. The AKL Series offers larger sizes, ranging from 150x300x142 mm (5.91x11.81x5.59 in.) to 600x300x210 mm (23.62x11.81x8.27 in.). Some models feature low or high covers, 76 AKL Series available in gray or tinted transparent. Standardized dimensions allow for joining multiple AKL Enclosures or combining AKII and AKL Enclosures with a common combination kit to create larger enclosure combinations. As with the AKII, the AKL family features the same 150 mm (5.91 in.) center to center DIN rail spacing. The standard ingress protection level when using appropriate strain reliefs is IP65. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com AKL1 – Polystyrene and Polycarbonate – 150x300mm (5.91x11.81in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Transparent Cover IP65 Knockout Sidewalls Gray or Tinted Transparent Cover Multiple Enclosure Combination Options Polystyrene or Polycarbonate Material: Polycarbonate Polyurethane Light Gray Polystyrene -40˚C to 70˚C (-40˚F to 158˚F) Polycarbonate -35˚C to 120˚C (-31˚F to 248˚F) Included Accessories: (10) M20 Double Membrane Seals (2) M25 Double Membrane Seals (2) M32 Double Membrane Seals (1) M40 Entry Spout Accessories: See section below • Gasket Material: • Color: • Temperature Range: • • AKL Ordering Information Cat. No. Cover Type / Color Length Dimensions mm (in) Width Height Std. Pk. Polystyrene Enclosure - low cover Transparent - low cover 740-401 744-001 AKL 1-g / gray AKL 1-t / trans. 150 mm (5.91 in.) 150 mm (5.91 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 132 mm (5.20 in) 132 mm (5.20 in) 1 1 Polycarbonate Enclosure - low cover Transparent - low cover 741-401 745-001 AKi 1-g / gray AKi 1-t / trans. 150 mm (5.91 in.) 150 mm (5.91 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 132 mm (5.20 in) 132 mm (5.20 in) 1 1 Accessories Ordering Information Cat. No. Mounting Plate – 240 x 112 mm DIN Rail – 216 mm Surface Mounted Hinge Kit Set Mounting Tab Kit (metal) 795-001 562-035 190-005 793-004 Type MPI 1 SMTS35/216 HK2 MT2 Std. Pk. 1 1 1 1 300 mm (11.81 in.) Please refer to pages 116-120 for additional accessories and detailed information 150 mm (5.91 in.) 94 mm (3.70 in.) 132 mm (5.20 in.) Please refer to page 126 for Knockout details. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 77 AKL2 – Polystyrene and Polycarbonate – 300x300mm (11.81x11.81in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Transparent Cover IP65 Knockout Sidewalls Gray or Tinted Transparent Cover Multiple Enclosure Combination Options Polystyrene or Polycarbonate Material: Polycarbonate Polyurethane Light Gray Polystyrene -40˚C to 70˚C (-40˚F to 158˚F) Polycarbonate -35˚C to 120˚C (-31˚F to 248˚F) Included Accessories: (10) M20 Double Membrane Seals (2) M25 Double Membrane Seals (2) M32 Double Membrane Seals (1) M40 Entry Spout Accessories: See section below • Gasket Material: • Color: • Temperature Range: • • AKL Ordering Information Cat. No. Cover Type / Color Length Dimensions mm (in) Width Height Std. Pk. Polystyrene Enclosure - low cover Enclosure - high cover Transparent - low cover Transparent - high cover 740-402 742-902 744-002 746-902 AKL 2-g / gray AKL 2-gh / gray AKL 2-t / trans. AKL 2-th / trans. 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 132 mm (5.20 in) 210 mm (8.27 in) 132 mm (5.20 in) 210 mm (8.27 in) 1 1 1 1 Polycarbonate Enclosure - low cover Enclosure - high cover Transparent - low cover Transparent - high cover 741-402 743-902 745-002 747-902 AKi 2-g / gray AKi 2-gh / gray AKi 2-t / trans. AKi 2-th / trans. 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 132 mm (5.20 in) 210 mm (8.27 in) 132 mm (5.20 in) 210 mm (8.27 in) 1 1 1 1 Accessories Ordering Information Cat. No. Type Mounting Plate (plastic) – 240 x 240 mm Mounting Plate (steel) – 240 x 240 mm DIN Rail – 250 mm Clip-in DIN Rail – 216 mm Surface Mounted Hinge Kit Set Mounting Tab Kit (metal) 795-002 795-012 562-735 562-035 190-005 793-004 MPI 2 MPS 2 CITS35/250 SMTS35/216 HK2 MT2 Std. Pk. 1 1 1 1 1 1 300 mm (11.81 in.) Please refer to pages 116-120 for additional accessories and detailed information. 94 mm (3.70 in.) 132 mm (5.20 in.) 300 mm (11.81 in.) 210 mm (8.27 in.) Please refer to page 126 for Knockout details. 78 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com AKL3 – Polystyrene and Polycarbonate – 450x300mm (17.72x11.81in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Transparent Cover IP65 Knockout Sidewalls Gray or Tinted Transparent Cover Multiple Enclosure Combination Options Polystyrene or Polycarbonate Material: Polycarbonate Polyurethane Light Gray Polystyrene -40˚C to 70˚C (-40˚F to 158˚F) Polycarbonate -35˚C to 120˚C (-31˚F to 248˚F) Included Accessories: (10) M20 Double Membrane Seals (2) M25 Double Membrane Seals (2) M32 Double Membrane Seals (1) M40 Entry Spout Accessories: See section below • Gasket Material: • Color: • Temperature Range: • • AKL Ordering Information Cat. No. Cover Type / Color Length Dimensions mm (in) Width Height Std. Pk. Polystyrene Enclosure - low cover Enclosure - high cover Transparent - low cover Transparent - high cover 740-403 742-903 744-003 746-903 AKL 3-g / gray AKL 3-gh / gray AKL 3-t / trans. AKL 3-th / trans. 450 mm (17.72 in.) 450 mm (17.72 in.) 450 mm (17.72 in.) 450 mm (17.72 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 132 mm (5.20 in) 210 mm (8.27 in) 132 mm (5.20 in) 210 mm (8.27 in) 1 1 1 1 Polycarbonate Enclosure - low cover Enclosure - high cover Transparent - low cover Transparent - high cover 741-403 743-903 745-003 747-903 AKi 3-g / gray AKi 3-gh / gray AKi 3-t / trans. AKi 3-th / trans. 450 mm (17.72 in.) 450 mm (17.72 in.) 450 mm (17.72 in.) 450 mm (17.72 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 132 mm (5.20 in) 210 mm (8.27 in) 132 mm (5.20 in) 210 mm (8.27 in) 1 1 1 1 Accessories Ordering Information Cat. No. Type Mounting Plate (plastic) – 240 x 390 mm Mounting Plate (steel) – 240 x 390 mm DIN Rail – 250 mm Clip-in DIN Rail – 216 mm Surface Mounted Hinge Kit Set Mounting Tab Kit (metal) 795-003 795-013 562-735 562-035 190-005 793-004 MPI 3 MPS 3 CITS35/250 SMTS35/216 HK2 MT2 Std. Pk. 1 1 1 1 1 1 300 mm (11.81 in.) Please refer to pages 116-120 for additional accessories and detailed information. 94 mm (3.70 in.) 132 mm (5.20 in.) 450 mm (17.72 in.) 210 mm (8.27 in.) Please refer to page 126 for Knockout details. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 79 AKL4 – Polystyrene and Polycarbonate – 600x300mm (23.62x11.81in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Transparent Cover IP65 Knockout Sidewalls Gray or Tinted Transparent Cover Multiple Enclosure Combination Options Polystyrene or Polycarbonate Material: Polycarbonate Polyurethane Light Gray Polystyrene -40˚C to 70˚C (-40˚F to 158˚F) Polycarbonate -35˚C to 120˚C (-31˚F to 248˚F) Included Accessories: (10) M20 Double Membrane Seals (2) M25 Double Membrane Seals (2) M32 Double Membrane Seals (1) M40 Entry Spout Accessories: See section below • Gasket Material: • Color: • Temperature Range: • • AKL Ordering Information Cat. No. Cover Type / Color Length Dimensions mm (in) Width Height Std. Pk. Polystyrene Enclosure - low cover Enclosure - high cover Transparent - low cover Transparent - high cover 740-404 742-904 744-004 746-904 AKL 4-g / gray AKL 4-gh / gray AKL 4-t / trans. AKL 4-th / trans. 600 mm (23.62 in.) 600 mm (23.62 in.) 600 mm (23.62 in.) 600 mm (23.62 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 132 mm (5.20 in) 210 mm (8.27 in) 132 mm (5.20 in) 210 mm (8.27 in) 1 1 1 1 Polycarbonate Enclosure - low cover Enclosure - high cover Transparent - low cover Transparent - high cover 741-404 743-904 745-004 747-904 AKi 4-g / gray AKi 4-gh / gray AKi 4-t / trans. AKi 4-th / trans. 600 mm (23.62 in.) 600 mm (23.62 in.) 600 mm (23.62 in.) 600 mm (23.62 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 300 mm (11.81 in.) 132 mm (5.20 in) 210 mm (8.27 in) 132 mm (5.20 in) 210 mm (8.27 in) 1 1 1 1 Accessories Ordering Information Cat. No. Type Mounting Plate (plastic) – 240 x 540 mm Mounting Plate (steel) – 240 x 540 mm DIN Rail – 250 mm Clip-in DIN Rail – 216 mm Surface Mounted Hinge Kit Set Mounting Tab Kit (metal) 795-004 795-014 562-735 562-035 190-005 793-004 MPI 4 MPS 4 CITS35/250 SMTS35/216 HK2 MT2 Std. Pk. 1 1 1 1 1 1 300 mm (11.81 in.) Please refer to pages 116-120 for additional accessories and detailed information. 94 mm (3.70 in.) 132 mm (5.20 in.) 600 mm (23.62 in.) 210 mm (8.27 in.) Please refer to page 126 for Knockout details. 80 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com