BeRex BT013 1500-4000 mhz medium power amplifier Datasheet

BT013
1500-4000 MHz Medium Power Amplifier
Device Features






OIP3 = 45.0 dBm @ 1900 MHz
Gain = 15.0 dB @ 1900 MHz
Output P1 dB = 27.5 dBm @ 1900 MHz
50 Ω Cascadable
Patented Over Voltage Protection Circuit
Lead-free/RoHS-compliant SOT-89 SMT package
Product Description
Typical Performance1
BeRex’s BT013 is a high performance and a
high dynamic range amplifier in a low cost
surface mount package(SOT-89) with a RoHS
-compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices
fabricated with InGaP GaAs technology.
This device is designed for use where high
linearity is required and features high OIP3
and P1 with low consumption current
(85mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port.
All devices are 100% RF/DC tested.
Parameter
Frequency
1900
2140
2400
3500
MHz
Gain
15.0
14.0
13.2
10.7
dB
S11
-17.5
-12.0
-13.0
-26.0
dB
S22
-12.5
-12.0
-13.0
-25.0
dB
2
OIP3
P1dB
45.0
27.5
45.0
27.2
43.0
27.0
40.0
26.0
dBm
dBm
IS-95C ACPR
21.0
-
-
-
dBm
WCDMA ACLR
6.8
19.5
6.8
18.5
6.8
7.1
dBm
dB
Noise Figure
1
Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.
2
OIP3 _ measured with two tones at an output of 13 dBm per tone separated by 1 MHz.
*ACPR&ACLR CH Power _ measured at 45dBc.
Min.
Applications
 Base station Infrastructure/RFID
 Commercial/Industrial/Military wireless system
Unit
Bandwidth
IC @ (Vc = 5V)
VC
RTH
1500
115
Typical
135
5.0
50
Max.
Unit
4000
155
MHz
mA
V
°C/W
Application Circuits
Vcc
Bypass
RF Choke
RF In
RF Out
BT013
DC
Block
DC
Block
*external matching circuit: refer to the page 6 to 12.
Absolute Maximum Ratings
Parameter
Operating Case Temperature
Storage Temperature
Junction Temperature
Operating Voltage
Supply Current
Input RF Power
Rating
-40 to +85
-55 to +155
+220
Unit
°C
°C
°C
+7.0
200
23
V
mA
dBm
*Operation of this device above any of these parameters may result in permanent damage.
BeRex
● website: www.berex.com
● email: [email protected]
1
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
V-I Characteristics
BeRex SOT89 Evaluation Board
BeRex
Evaluation Board
*Voltage protection works at 5~6 V
*Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB
Typical Device Data
S-parameters (Vc=5V, Ic=135mA, T=25°C)
BeRex
● website: www.berex.com
● email: [email protected]
2
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
S-Parameter
(Vdevice = 5.0V, Icc = 135mA, T = 25 °C, calibrated to device leads)
BeRex
Freq
[MHz]
S11
[Mag]
S11
[Ang]
S21
[Mag]
S21
[Ang]
S12
[Mag]
S12
[Ang]
S22
[Mag]
S22
[Ang]
100
500
1000
1500
2000
2500
3000
3500
4000
-0.046
-0.952
-1.111
-0.928
-1.240
-1.390
-1.669
-1.989
-2.281
-30.149
-116.77
-162.01
157.99
129.31
104.6
82.694
60.455
37.752
2.219
6.737
13.26
10.718
9.181
8.334
6.491
6.124
5.024
-128.4
-174.18
161.56
121.35
101.55
81.201
66.725
51.795
33.795
-41.958
-32.703
-32.513
-30.171
-28.599
-26.76
-26.706
-25.792
-24.653
66.107
25.318
76.255
46.516
42.527
37.808
32.623
26.141
20.698
-3.497
-3.457
-7.557
-7.780
-7.262
-7.180
-7.38
-7.336
-6.823
165.97
162.64
117.5
127.17
116.25
97.537
74.648
50.666
32.131
● website: www.berex.com
● email: [email protected]
3
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
WCDMA 6FA 2140 –55dBc
WCDMA 6FA 2140 –60dBc
BeRex
● website: www.berex.com
● email: [email protected]
4
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
ACLR
BeRex
● website: www.berex.com
● email: [email protected]
5
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Application Circuit: 1900 MHz
Schematic Diagram
BOM
C1
C2
C3
+5V
L1
RFin
C4
C5
RFout
BT013
C7
C6
10 uF
Tolerance
C1
100pF
±5%
C2
1000pF
±5%
C3
10uF
±20%
C4
22pF
±5%
C5
22pF
±5%
C6
3pF
±5%
C7
0.5pF
±5%
L1
100nH
±5%
Note:
1. PCB: 31mil thick FR4.
1000 pF
2. Distance between the center of the shunt cap
(C6) and the input pin of BT013 _ 3.2mm.
100 pF
BT013
22 pF
BeRex
3 pF
3. Distance between the center of the shunt cap
(C7) and the output pin of BT013 _ 8.3mm.
100 nH
0.5 pF
22 pF
● website: www.berex.com
● email: [email protected]
6
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Typical Performance
BeRex
● website: www.berex.com
● email: [email protected]
7
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Application Circuit: 2140MHz
Schematic Diagram
C1
C2
C3
+5V
L1
RFin
C4
C5
RFout
BT013
C6
C7
10 uF
BOM
C1
100pF
Tolerance
±5%
C2
1000pF
±5%
C3
10uF
±20%
C4
24pF
±5%
C5
24pF
±5%
C6
3pF
±5%
C7
0.5pF
±5%
L1
33nH
±5%
Note:
1. PCB: 31mil thick FR4
1000 pF
2. Distance between the center of the shunt cap
(C6) and the input pin of BT013 _ 1.5mm.
100 pF
BT013
24 pF
BeRex
3 pF
3. Distance between the center of the shunt cap
(C7) and the output pin of BT013 _ 6.4mm.
33 nH
0.5 pF
24 pF
● website: www.berex.com
● email: [email protected]
8
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Typical Performance
BeRex
● website: www.berex.com
● email: [email protected]
9
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Application Circuit: 2400MHz
Schematic Diagram
BOM
C1
C2
C3
+5V
L1
RFin
C4
RFout
C5
BT013
C6
C7
10 uF
1000 pF
100 pF
BT013
100 pF
BeRex
2 pF
33 nH
0.5 pF
Tolerance
C1
100pF
±5%
C2
1000pF
±5%
C3
10uF
±15%
C4
100pF
±5%
C5
100pF
±5%
C6
2pF
±5%
C7
0.5pF
±5%
L1
33nH
±5%
Note:
1.
PCB: 31mil thick FR4
2.
Distance between the center of the shunt cap
(C6) and the input pin of BT013 _ 0.7mm.
3.
Distance between the center of the shunt cap
(C7) and the output pin of BT013 _ 3.2mm.
100 pF
● website: www.berex.com
● email: [email protected]
10
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Typical Performance
BeRex
● website: www.berex.com
● email: [email protected]
11
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Application Circuit: 3500MHz
Schematic Diagram
BOM
C1
C2
C3
+5V
L1
RFin
C4
C7
C5
RFout
BT013
C6
C8
Tolerance
C1
100pF
±5%
C2
C3
C4
C5
C6
C7
C8
L1
1000pF
10uF
22pF
22pF
0.75pF
0.5pF
0.5pF
33nH
±5%
±20%
±5%
±5%
±5%
±5%
±5%
±5%
Note:
10uF
1.
PCB: 31mil thick FR4
2.
Distance between the center of the shunt cap
(C6) and the input pin of BT013 _ 10mm.
3.
Distance between the center of the series cap
(C7) and the input pin of BT013 _ 4mm.
4.
Distance between the center of the shunt cap
(C8) and the output pin of BT013 _ 3mm.
1000 pF
100pF
100 pF
0.5pF
33nH
B
22pF
22pF
B
0.75pF
BeRex
BT013
BT013
0.5pF
● website: www.berex.com
● email: [email protected]
12
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Typical Performance
BeRex
● website: www.berex.com
● email: [email protected]
13
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Package Outline Dimension
Suggested PCB Land Pattern and PAD Layout
PCB Land Pattern
0.40
1.30
PCB Mounting
0.40
Ø0.40
0.40
0.75
1.20
2.15
1.20
0.50
0.45
1.20
1.20
2.80
1.50
1.00
0.65
0.35
Note : All dimension are in millimeters
PCB lay out _ on BeRex website
BeRex
● website: www.berex.com
● email: [email protected]
14
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT013
1500-4000 MHz Medium Power Amplifier
Tape & Reel
SOT89
Packaging information:
Tape Width (mm): 12
Reel Size (inches): 7
Device Cavity Pitch (mm): 8
Devices Per Reel: 1000
Lead plating finish
100% Tin Matte finish
(All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate
thin whisker growth concerns.)
MSL / ESD Rating
ESD Rating:
Class 1B
Value:
Passes <1000V
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-A114B
MSL Rating:
Level 1 at +265°C convection reflow
Standard:
JEDEC Standard J-STD-020
NATO CAGE code:
2
BeRex
N
9
6
F
● website: www.berex.com
● email: [email protected]
15
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
Similar pages