AIMTEC AM1P0505SNZ 1 watt | dc-dc converter Datasheet

Click on Series name for product info on aimtec.com
Series AM1P-NZ
1 Watt | DC-DC Converter
FEATURES:




 Operating temperature -40oC to + 85oC
 Input / Output isolation 1000 VDC
 Pin computable with multiple manufacturers
 UL94-VO Package
RoHS compliant
8 Pin DIP Package
Low ripple and noise
High efficiency up to 79%
Models
Single output
Input Voltage
(V)
Model
AM1P-0505S-NZ
AM1P-1215S-NZ
Output Voltage
(V)
4.5-5.5
10.8-13.2
Output Current
max (mA)
5
15
Isolation
(VDC)
Efficiency
(%)
1000
1000
78
79
200
67
Input Specifications
Parameters
Voltage range
Nominal
Typical
5
12
4.5-5.5
10.8-13.2
Filter
Maximum
Units
VDC
Capacitor
Isolation Specifications
Parameters
Tested I/O voltage
Resistance
Capacitance
Conditions
Typical
60 sec
Rated
Units
1000
VDC
MOhm
pF
> 1000
60
Output Specifications
Parameters
Voltage accuracy
Short Circuit protection
Line voltage regulation
Load voltage regulation
Temperature coefficient
Ripple & Noise
Conditions
Typical
Maximum
Units
See tolerance graph
Momentary (1 sec)
±1.2
10
±0.03
75
For 1.0% Vin
Load 10 – 100%
At 20 MHz Bandwidth
% of Vin
%
%/oC
m Vp-p
General Specifications
Parameters
Conditions
Typical
Maximum
Units
KHz
Switching frequency
100% load
150
oC
Operating temperature
Without derating
-40 to +85
oC
Storage temperature
-55 to +125
oC
Case temperature
90
Cooling
Free air convection
Humidity
90
%
Case material
Plastic UL94-VO
Weight
1.8
g
Dimensions (L x W x H)
0.46 x 0.39x 0.30 inches
11.70 x 9.80 x 7.70 mm
MTBF
>1 000 000 hrs(MIL-HDBK -217F, Ground Benign, t=+25oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Safety Specifications
Parameters
Agency approvals
Standards
www.aimtec.com
F 051e R11.I
CE
IEC60950-1 :2001
Tel: +1 514 620 2722
1 of 2
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1P-NZ
1 Watt | DC-DC Converter
Pin Out Specifications
Pin
1
4
5
6
7
8
External capacitor
Single
- V Input
+V Input
+V Output
No pin
-V Output
No pin
Vin
(VDC)
External
capacitor
(uF)
Vout
(VDC)
External
capacitor
(uF)
5
12
24
-
4.7
2.2
1
-
5
9
12
15
10
4.7
2.2
1
Dimensions
11.70
(0.46)
Filtering
7.62
(0.30)
0.50
(0.02)
1
7.62
(0.30)
9.80
(0.39)
4
Bottom View
8
7
6
5
2.54
(0.10)
7.70
(0.30)
4.10
(0.16)
0.50
(0.02)
2.54
(0.10)
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R11.I
Tel: +1 514 620 2722
2 of 2
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Similar pages