BCR185... PNP Silicon Digital Transistor • Switching circuit, inverter, interface circuit, driver circuit • Built in bias resistor (R1 = 10 kΩ , R2 = 47 kΩ ) • BCR185S: Two internally isolated transistors with good matching in one multichip package • BCR185S: For orientation in reel see package information below • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BCR185/F/W BCR185S C C1 B2 E2 3 6 5 4 R2 R1 R1 TR2 TR1 R2 R1 R2 1 B 2 1 2 3 E E1 B1 C2 EHA07183 EHA07173 Type Marking Pin Configuration BCR185 WNs 1=B 2=E 3=C - - - SOT23 BCR185F WNs 1=B 2=E 3=C - - - TSFP-3 BCR185S WNs 1=E1 2=B1 3=C2 4=E2 5=B2 6=C1 SOT363 BCR185W WNs 1=B 2=E 1 3=C - - Package - SOT323 2007-08-02 BCR185... Maximum Ratings Parameter Symbol Value Collector-emitter voltage VCEO 50 Collector-base voltage VCBO 50 Input forward voltage Vi(fwd) 40 Input reverse voltage Vi(rev) 6 Collector current IC Total power dissipation- Ptot 100 200 BCR185F, TS ≤ 128°C 250 BCR185S, T S ≤ 115°C 250 BCR185W, TS ≤ 124°C 250 Tj Storage temperature Tstg Thermal Resistance Parameter Junction - soldering point2) Symbol RthJS V mA mW BCR185 TS ≤ 102°C Junction temperature Unit 150 °C -65 ... 150 Value BCR185 ≤ 240 BCR185F ≤ 90 BCR185S ≤ 140 BCR185W ≤ 105 Unit K/W 1Pb-containing 2For package may be available upon special request calculation of RthJA please refer to Application Note Thermal Resistance 2 2007-08-02 BCR185... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics Collector-emitter breakdown voltage V(BR)CEO 50 V IC = 100 µA, IB = 0 Collector-base breakdown voltage V(BR)CBO 50 - - I CBO - - 100 nA I EBO - - 167 µA h FE 70 - - - - - 0.3 V Vi(off) 0.5 - 1 Vi(on) 0.5 - 1.4 7 10 13 0.19 0.21 0.24 fT - 200 - MHz Ccb - 3 - pF IC = 10 µA, IE = 0 Collector-base cutoff current VCB = 40 V, IE = 0 Emitter-base cutoff current VEB = 6 V, IC = 0 DC current gain1) IC = 5 mA, VCE = 5 V Collector-emitter saturation voltage1) VCEsat IC = 10 mA, IB = 0.5 mA Input off voltage IC = 100 µA, VCE = 5 V Input on voltage IC = 2 mA, VCE = 0.3 V Input resistor R1 Resistor ratio R1/R 2 kΩ - AC Characteristics Transition frequency IC = 10 mA, VCE = 5 V, f = 100 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz 1Pulse test: t < 300µs; D < 2% 3 2007-08-02 BCR185... DC current gain hFE = ƒ(IC) VCE = 5 V (common emitter configuration) Collector-emitter saturation voltage VCEsat = ƒ(IC), hFE = 20 10 3 1 V V CEsat h FE 0.8 10 2 0.7 0.6 -40 °C -25 °C 25 °C 85 °C 125 °C 0.5 0.4 10 -40 °C -25 °C 25 °C 85 °C 125 °C 1 0.3 0.2 0.1 10 0 -4 10 10 -3 10 -2 A 10 0 -3 10 -1 10 -2 A 10 IC IC Input on Voltage Vi(on) = ƒ(IC ) VCE = 0.3V (common emitter configuration) Input off voltage V i(off) = ƒ(IC) VCE = 5V (common emitter configuration) 10 1 10 2 -40 °C -25 °C 25 °C 85 °C 125 °C Vi(off) Vi(on) V 10 1 -1 -40 °C -25 °C 25 °C 85 °C 125 °C 10 0 10 0 10 -1 -5 10 10 -4 10 -3 10 -2 10 10 -1 -5 10 -1 IC 10 -4 10 -3 10 -2 A 10 -1 IC 4 2007-08-02 BCR185... Total power dissipation Ptot = ƒ(TS) BCR185 Total power dissipation Ptot = ƒ(TS) BCR185F 300 300 mW 250 250 225 225 200 200 P tot P tot mW 175 175 150 150 125 125 100 100 75 75 50 50 25 25 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 15 30 45 60 75 TS 150 TS Total power dissipation Ptot = ƒ(TS) BCR185S Total power dissipation Ptot = ƒ(TS) BCR185W 300 300 mW mW 250 250 225 225 200 200 Ptot Ptot 90 105 120 °C 175 175 150 150 125 125 100 100 75 75 50 50 25 25 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 TS 15 30 45 60 75 90 105 120 °C 150 TS 5 2007-08-02 BCR185... Permissible Pulse Load RthJS = ƒ(tp ) BCR185 Permissible Pulse Load Ptotmax/P totDC = ƒ(tp) BCR185 10 3 10 3 P totmax / P totDC K/W RthJS 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 10 1 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp Permissible Pulse Load BCR185F Ptotmax/P totDC = ƒ(tp) BCR185F 10 2 0 10 0 10 3 Ptotmax /PtotDC K/W RthJS 10 tp Permissible Puls Load RthJS = ƒ (tp) D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 1 10 0 10 -1 -6 10 s 10 -5 10 -4 10 -3 10 10 2 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 6 2007-08-02 BCR185... Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BCR185S Ptotmax/P totDC = ƒ(tp) BCR185S 10 3 10 3 P totmax / P totDC K/W RthJS 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 10 1 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 10 0 tp Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BCR185W Ptotmax/P totDC = ƒ(tp) BCR185W 10 3 10 3 Ptotmax / PtotDC K/W RthJS 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 10 1 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 7 2007-08-02 Package SOT23 BCR185... 0.4 +0.1 -0.05 1) 2 0.08...0.1 C 0.95 1.3 ±0.1 1 2.4 ±0.15 3 0.1 MAX. 10˚ MAX. B 1 ±0.1 10˚ MAX. 2.9 ±0.1 0.15 MIN. Package Outline A 5 0...8˚ 1.9 0.2 0.25 M B C M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 1.3 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s 2005, June Date code (YM) Pin 1 BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 8 2.13 2.65 0.9 Pin 1 1.15 3.15 8 2007-08-02 Package SOT323 BCR185... Package Outline 0.9 ±0.1 2 ±0.2 0.3 +0.1 -0.05 0.1 MAX. 3x 0.1 M 0.1 A 1 2 1.25 ±0.1 0.1 MIN. 2.1 ±0.1 3 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 0.8 1.6 0.6 0.65 0.65 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BCR108W Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 9 2007-08-02 Package SOT363 BCR185... Package Outline 2 ±0.2 0.9 ±0.1 +0.1 6x 0.2 -0.05 0.1 0.1 MAX. M 0.1 Pin 1 marking 1 2 3 A 1.25 ±0.1 4 0.1 MIN. 5 2.1 ±0.1 6 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 1.6 0.9 0.7 0.3 0.65 0.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 2005, June Date code (Year/Month) Pin 1 marking Laser marking BCR108S Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel For symmetric types no defined Pin 1 orientation in reel. 0.2 2.3 8 4 Pin 1 marking 1.1 2.15 10 2007-08-02 Package TSFP-3 BCR185... Package Outline 0.2 ±0.05 0.55 ±0.04 1 1.2 ±0.05 0.2 ±0.05 3 2 0.2 ±0.05 10˚ MAX. 0.8 ±0.05 1.2 ±0.05 0.15 ±0.05 0.4 ±0.05 0.4 ±0.05 Foot Print 1.05 0.45 0.4 0.4 0.4 Marking Layout (Example) Manufacturer BCR847BF Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 1.2 1.5 8 0.3 Pin 1 0.7 1.35 11 2007-08-02 BCR185... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 12 2007-08-02