A B 2 7 MI N 1.5 5.9 8.6 1 CATHODE 2.54 5 .5 1 MAX T-1 and T-1¾, Infrared LEDs: 880nm, 940nm Size Lens Radiant Power at 20mA Minimum Typical INFRARED 1 E21 T-1 Clear 2.0mW/sr INFRARED 2 E22 T-1 Trans.Blue INFRARED 3 E23 T-1¾ Clear INFRARED 4 E24 T-1¾ Trans.Blue 5.0mW/sr Line Part No. No. Vewing Angle θ½ 2θ Forward Voltage Peak at 20mA Wave Length Typical Maximum at 20mA Drawing 10.0mW/sr 30° 1.2V 1.5V 940nm A 2.0mW/sr 4.0mW/sr 30° 1.4V 1.7V 880nm A 8.0mW/sr 20.0mW/sr 30° 1.2V 1.5V 940nm B 20.0mW/sr 30° 1.4V 1.7V 880nm B C 2 7 MI N 1.5 5.9 8.6 1 CATHODE 2.54 5 .5 1 MAX T-1¾ LEDs with Resistor - 5V Line No. • RED • RED • YELLOW • GREEN • GREEN Part No. Lens Voltage Range Minimum Maximum Luminous Intensity Viewing Current Range Peak at 5VDC Angle at 5VDC Wave Length θ½ Minimum Maxiumum at 5VDC Drawing Minimum Maximum 2θ 5 E304-5V Diffused 4.0VDC 6.0VDC 100mcd 300mcd 60° 8mA 15.5mA 660nm C 6 E148-5V Diffused 4.0VDC 6.0VDC 5mcd 30mcd 60° 8mA 15.5mA 625nm C 7 E149-5V Diffused 4.0VDC 6.0VDC 5mcd 20mcd 60° 8mA 15.5mA 590nm C 8 E151-5V Clear 4.0VDC 6.0VDC 20mcd 150mcd 30° 8mA 15.5mA 565nm C 9 E150-5V Diffused 4.0VDC 6.0VDC 5mcd 20mcd 60° 8mA 15.5mA 565nm C D 2 7 MI N 1.5 5.9 8.6 1 CATHODE 2.54 5 .5 1 MAX T-1¾ LEDs with Resistor - 12V Line No. • RED • YELLOW • GREEN 68 Part No. Lens Voltage Range Minimum Maximum Luminous Intensity Viewing Current Range Peak at 12VDC Angle at 12VDC Wave Length θ½ Minimum Maximum at 12VDC Drawing Minimum Maximum 2θ 10 E304-12V Diffused 9.5VDC 13.0VDC 11 E149-12V Diffused 9.5VDC 13.0VDC 5mcd 15mcd 12 E151-12V Diffused 9.5VDC 13.0VDC 12mcd 20mcd Telephone: 781-935-4442 Fax: 781-938-5867 100mcd 300mcd 60° 8mA 15.5mA 660nm D 60° 8mA 15.5mA 590nm D 60° 8mA 15.5mA 565nm D [email protected] www.gilway.com Engineering Catalog 169 A B Surface Mount Infrared LEDs: 880nm, 940nm Line No. Part No. INFRARED 1 E25A Clear INFRARED 2 E26A Translucent Blue Radiant Power at 20mA Minimum Maximum Lens Vewing Angle θ½ 2θ Forward Voltage Peak at 20mA Wave Length Typical Maximum at 20mA Drawing 1.25mW/sr 5.0mW/sr 120° 1.2V 1.5V 940nm A 1mW/sr 5.0mW/sr 120° 1.4V 1.7V 880nm B Tape & Reel packaging is standard, 1,500 LEDs per reel. Recommended soldering pad, see page 84, number 4. Telephone: 781-935-4442 Fax: 781-938-5867 [email protected] www.gilway.com Engineering Catalog 169 B C Phototransistors Light Current IL VCE =5V H=1mW/cm 2 Minimum Maximum Dark Curremt ID VCE=10 H=0 Maximum Collector to Emitter Breakdown Voltage BRCEO µA IC=100µ H=0 Minimum Emitter to Collector Breakdown Voltage BRECO µA IC=100µ H=0 Minimum Collector to Emitter Saturation Voltage VCE (sat) IC=0.1mA H=2.5mW/cm2 Maximum Drawing Line No. Part No. 3 D40 T-1 1.0mA 2.0mA 100nA 30.0V 5.0V 0.8V B 4 D41 T-1¾ 1.0mA 2.0mA 100nA 30.0V 5.0V 0.8V C Size Telephone: 781-935-4442 Fax: 781-938-5867 [email protected] www.gilway.com Engineering Catalog 169