PRODUCT DATASHEET Mira series last update 26/6/2015 DETAILS Product Number CN13145_MIRA-W Family Mira Type Pack Color black Diameter 34,2 mm Height 16,15 mm Style round Optic Material PC Holder Material Fastening screw Status production ready ROHS Comliant Yes Date Updated 26/06/2015 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector V10 Gen6 44 deg Wide 77 % 1.250 - CXA/B 15xx 42 deg Wide - 1.200 - May 29th 2017 6:41 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 Relative intensity of CN13145_MIRA-W_(V10) 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 A B C D 4 4 16.2 5 2. 22.8 Isometric view 1 16.2 34.2 3 4 . 3 6 1 16.15 Bottom view 2 2 Materials: - LENS: PC - HOLDER: PC, black - TAPE: PU foam Front view Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE 16.11.2012 Datasheet MIRA assembly SIZE A4 SCALE D PART NUMBER 1:1 WEIGHT 1 SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.