AORN www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Precision Automotive, AEC-Q200 Qualified, Networks FEATURES • Moisture resistant tantalum nitride resistive film (MIL STD 202, method 106) Available • Standard 8 pin count (0.150" narrow body) JEDEC MS-012 Available • Rugged molded case construction • Excellent long term ratio stability (R ± 0.015 %) The AORN series features a narrow body (0.150") small outline SMT package. The network is constructed with a tantalum nitride resistor film on a high purity alumina substrate for improved ESD and moisture protection. • Low TCR tracking ± 5 ppm/°C SCHEMATICS Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. 8 R1 7 R2 6 R2 • Passes Sulfur Resistance Test per ASTM B 809 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 5 R1 TYPICAL APPLICATIONS 1 2 3 • Voltage divider circuits 4 • Engine control units • Signal conditioning 8 R1 7 R1 1 2 6 R1 3 5 • Feedback circuits TYPICAL PERFORMANCE R1 TCR 4 Note • Consult Factory for additional divider ratios and resistance values. TOL. ABSOLUTE TRACKING 25 5 ABSOLUTE RATIO 0.10 0.05 STANDARD DIVIDER VALUES RATIO R1/R2 R1 R2 100:1 50:1 25:1 20:1 10:1 5:1 2:1 100 k 50 k 25 k 20 k 10 k 10 k 10 k 100 k 100 k 49.9 k 24.9 k 20.0 k 10.0 k 4.99 k 2.0 k 1.0 k 1 k 1 k 1 k 1 k 1 k 2 k 5 k 1:1 Revision: 24-Feb-15 Document Number: 60127 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AORN www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Tantalum nitride (Ta2N) - Pin/Lead Number 8 - Resistance Range 1 k to 100 k per resistor - TCR: Absolute ± 25 ppm/°C (standard) -55 °C to +155 °C TCR: Tracking ± 5 ppm/°C (typical) -55 °C to +155 °C ± 0.10 % to ± 1 % At +25 °C temperature ± 0.05 % to ± 0.1 % At +25 °C temperature Material Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor 100 mW Maximum at +70 °C Power Rating: Package 400 mW Maximum at +70 °C Stability: Absolute R ± 0.05 % 1000 h at +155 °C Stability: Ratio R ± 0.015 % 1000 h at +155 °C Voltage Coefficient < 0.1 ppm/V Working Voltage 100 V max. not to exceed - P x R Operating Temperature Range -55 °C to +155 °C - Storage Temperature Range -55 °C to +155 °C - -30 dB - 0.08 μV/°C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at +25 °C Shelf Life Stability: Ratio R ± 0.002 % 1 year at +25 °C Noise Thermal EMF DIMENSIONS AND IMPRINTING in inches and millimeters E B C DIMENSION INCHES MILLIMETERS A 0.157 3.99 B 0.0165 ± 0.0025 0.4 ± 0.06 C 0.050 1.27 D 0.195 max. 4.93 max. E 0.008 ± 0.001 0.20 ± 0.03 F 0.028 ± 0.001 0.71 ± 0.02 G 0.239 ± 0.001 6.07 ± 0.13 H 0.068 max. 1.73 max. I 0.008 ± 0.002 6.07 ± 0.13 F A G Date Code D H I Seating Plane MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride (Ta2N) Substrate Material Ceramic Body Terminals Lead Frame Finish Note • Gold thickness less than 10 μ". Molded epoxy Copper alloy Ni/Pd/Au solder free (1) DERATING CURVE 100 Precent of Rated Power AORN 100 % = 0.40 W 80 60 40 20 0 0 70 125 155 Ambient Temperature °C Revision: 24-Feb-15 Document Number: 60127 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AORN www.vishay.com Vishay Dale Thin Film ENVIRONMENTAL TESTS ENVIRONMENTAL TEST SUGGESTED TYPICAL VISHAY PRODUCT PERFORMANCE LIMITS < 10K CONDITONS TYPICAL VISHAY PERFORMANCE > 10K Max. Ambient Temperature at Rated Wattage +70 °C +70 °C +70 °C Max. Ambient Temperature at Power Derating +155 °C +155 °C +155 °C R MIL-STD-202, 108, 1000 h at 155 °C ± 0.20 % 0.08 % 0.045 % Temperature Cycling R JESD22, A104, 1000 cycles, -55 °C to +155 °C ± 0.25 % 0.012 % 0.010 % Moisture Resistance R MIL-STD-202 method 106 ± 0.20 % 0.007 % 0.007 % R MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.25 % 0.075 % 0.075 % High Temperature Exposure Biased Humidity Life R MIL-STD-202, 108, 1000 h at 155 °C ± 0.50 % 0.199 % 0.221 % Mechanical Shock R MIL-STD-202 method 213, condition C ± 0.25 % 0.004 % 0.002 % Vibration R MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.25 % 0.004 % 0.002 % Resistance to Soldering Heat R MIL-STD-202, 204, condition B ± 0.10 % -0.008 % 0.016 % R AEC-Q200-002 at 1 kV, human body ± 0.50 % -0.028 % AEC-Q200-002 at 2 kV, human body ± 0.50 % J-STD-002 method B and B1 95 % Electrostatic Discharg Solderability R Terminal Strenght 0.108 % Acceptable Acceptable AEC-Q200-006 at 1 kg for 60 s Acceptable Acceptable AEC-Q200-001 Para 4.0 Acceptable Acceptable Flame Retardance GLOBAL PART NUMBER INFORMATION New Global Part Numbering: AORN 5-1 A O R N A O R N GLOBAL MODEL (4 digits) AORN 8 pin SOIC, surface mount (e4) 1 5 - 1 A U F 0 0 1 A U F DIVIDER (1) or RESISTANCE (3, 4 or 5 digits) TOLERANCE % (ABSOLUTE / RATIO) or A = 0.1 / 0.05 B = 0.1 / 0.1 C = 0.25 / 0.1 D = 0.5 / 0.1 F = 1.0 / 0.5 2-1 5-1 10 - 1 20 - 1 25 - 1 50 - 1 100 - 1 1001 2001 4991 1002 2002 2492 4992 1003 PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Note (1) Examples: 1. 2-1 = ratio between resistance values 2. 1001 = four 1K resistors Revision: 24-Feb-15 Document Number: 60127 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000