Kemet CBR02C330F9GACTU Surface mount multilayer ceramic capacitors (smd mlccs) for high power application Datasheet

Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Application
CBR Series, C0G Dielectric, Ultra High Q, Low ESR,
6.3VDC-250VDC (RF & Microwave) Preliminary
Overview
KEMET’s CBR series surface mount multilayer ceramic capacitors
(MLCCs) in C0G dielectric feature a robust and exceptionally
stable base metal electrode dielectric system that provides
excellent low loss performance (High Q). These devices offer
extremely low ESR and high self-resonance characteristics, and
are well suited for resonant circuit applications or those where
Q and stability of capacitance characteristics are required. CRF
series capacitors exhibits no change in capacitance with respect
to time and voltage and boasts a negligible change in capacitance
with reference to ambient temperature. Capacitance change is
limited to ±30ppm/ºC from -55°C to +125°C.
CBR series devices are are suitable for many circuit applications
including RF power amplifiers, mixers, oscillators, low noise
amplifiers, filter networks, antenna tuning, timing circuits, delay
lines and MRI imaging coils.
Benefits
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated termination finish allowing for
excellent solderability
• -55°C to +125°C operating temperature range
• Ultra High Q
• Base metal electrode (BME) dielectric system
• Pb-Free and RoHS compliant
• 0201, 0402, 0603 and 0805 case sizes (inches)
• DC voltage ratings of 6.3V, 10V, 25V, 50V, 100V and 250V
• Capacitance offerings ranging from 0.1pF up to 100pF
• Available capacitance tolerances of ±0.05pF, ±0.1pF, ±0.25pF,
±0.5pF, ±1%, ±2%, ±5% and ±10%
• No piezoelectric noise
• Low ESR
• High thermal stability
• No capacitance change with respect to applied rated DC voltage
• Negligible capacitance change with respect to temperature
• No capacitance decay with time
Applications
Typical applications include critical timing, tuning, bypass,
coupling, feedback, filtering, impedance matching and DC
blocking.
Field applications include wireless and cellular base stations,
wireless LAN, subscriber based wireless services, wireless
broadcast equipment, satellite communications, RF PA modules,
filters, VCOs, PAs, matching networks, RF modules, satellite
communications and medical electronics.
Ordering Information
CBR
Series
CBR
02
C
Case Size Specification/
(L"x W")
Series
330
F
9
G
A
C
TU
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Dielectric
Termination
Style
Termination Finish
Packaging/Grade
(C-Spec)
9 = 6.3V
8 = 10V
3 = 25V
5 = 50V
1 = 100V
A = 250V
G = C0G
A = N/A
C = 100% Matte Sn
02 = 0201 C = Standard 2 Sig. Digits
04= 0402
+ Number of
06 = 0603
Zeros
08 = 0805
Use 9 for 1.0 9.9pF
Use 8 for 0.5 .99pF
ex. 2.2pF = 229
ex. 0.5pF = 508
One WORLD
One Brand
A = ±0.05pF
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
F = ±1%
G = ±2%
J = ±5%
One Strategy
One Focus
One Team
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
TU = 7" Reel
Unmarked
One KEMET
C1030-1 • 4/6/2011
1
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications – CBR Series
Dimensions – Millimeters (Inches)
W
100% Tin or SnPb Plate
L
T
Nickel Plate
Electrodes
Case
Case
Size (in.) Size (mm)
L
Length
W
Width
T
Thickness
0.30 (.012) ± 0.03 (.001)
0201
0603
0.60 (.024) ± 0.03 (.001)
0.30 (.012) ± 0.03 (.001)
0402
1005
1.00 (.040) ± 0.05 (.002)
0.50 (.020) ± 0.05 (.002)
0603
0805
1608
2012
1.60 (.063) ± 0.10 (.004)
2.00 (.079) ± 0.20 (.008)
0.80 (.031) ± 0.10 (.004)
1.25 (.049) ± 0.20 (.008)
B
Bandwidth
0.15 (.006) ± 0.05 (.002)
0.25 (.010) + 0.05 (.002) /
0.50 (.020) ± 0.05 (.002)
-0.10 (.004)
0.80 (.031) ± 0.07 (.003) 0.40 (.016) ± 0.15 (.006)
0.85 (.031) ± 0.10 (.004) 0.50 (.020) ± 0.20 (.008)
Conductive Metalization
Mounting
Technique
Solder Reflow
Only
Solder Wave
or Solder Reflow
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range:
Capacitance Change with Reference to +25°C and 0 Vdc Applied (TCC):
Aging Rate (Max % Cap Loss/Decade Hour):
-55°C to +125°C
0 ± 30PPM/ºC
0%
Insulation Resistance (IR) Limit @ 25°C:
See Dielectric Withstanding Voltage Table
(5 ± 1 seconds and charge/discharge not exceeding 50mA)
≥ 1000 for capacitance values ≥ 30pF
≥ 400 + 20C for capacitance values < 30pF
105 Megohms minimum (Rated voltage applied for 120 ± 5 secs)
Insulation Resistance (IR) Limit @ 125°C:
104 Megohms minimum (Rated voltage applied for 120 ± 5 secs)
Dielectric Withstanding Voltage (DWV):
Quality Factor (Q):
Capacitance and Quality Factor (Q) measured under the following conditions:
1MHz ± 100kHz and 1.0 ± 0.2 Vrms if capacitance ≤1000pF
1kHz ± 50Hz and 1.0 ± 0.2 Vrms if capacitance >1000pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as Automatic
Level Control (ALC). The ALC feature should be switched to "ON."
Dielectric Withstanding Voltage (DWV)
DWV
250%
200%
Rated Voltage (VDC)
≤100V
250V
Environmental Compliance
Pb-Free and RoHS compliant
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1030-1 • 4/6/2011
2
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications – CBR Series
Table 1 – CBR Series (0201 - 0805 Case Sizes)
Case Size (in.)
Voltage Code
Rated Voltage (VDC)
Cap
Cap Code
0.1 pF
0.2 pF
0.3 pF
0.4 pF
0.5 pF
0.6 pF
0.7 pF
0.8 pF
0.9 pF
1.0 pF
1.8 pF
2.2 pF
2.4 pF
2.7 pF
3.0 pF
3.3 pF
3.6 pF
3.9 pF
4.3 pF
4.7 pF
5.1 pF
5.6 pF
6.2 pF
6.8 pF
7.5 pF
8.2 pF
9.1 pF
10 pF
11 pF
12 pF
13 pF
15 pF
16 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
56 pF
68 pF
82 pF
100 pF
108
208
308
408
508
608
708
808
908
109
189
229
249
279
309
339
369
399
439
479
519
569
629
689
759
829
919
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
560
680
820
101
Cap
Cap Code
0201
9
6.3
8
10
0402
3
25
5
50
0603
1
100
5
50
1
100
0805
A
250
5
50
1
100
A
250
Capacitance & Capacitance Tolerance Availability
A, B, C
A, B, C
B, C, D
B, C, D
F, G, J
A, B, C
A, B, C
B, C, D
B, C, D
F, G, J
F, G, J
F, G, J
F, G, J
6.3
10
25
50
100
50
100
250
50
100
250
9
8
3
5
1
5
1
A
5
1
A
0201
0402
0603
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
0805
C1030-1 • 4/6/2011
3
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications – CBR Series
Soldering Process
Recommended Soldering Technique:
• Solder wave or solder reflow for 0603 & 0805 case sizes
• 0201 & 0402 case sizes are limited to solder reflow only
Recommended Soldering Profile:
• KEMET recommends following the guidelines outlined in IPC/JEDEC J-STD-020
Recommended Solder Alloys: Pb-Free
Alloy
Composition
Solidus
Liquidous
In50
50 In, 50 Pb
180 °C
209 °C
In52
52 In, 48 Sn
118 °C
118 °C
Sn62
62.5 Sn, 36.1 Pb, 1.4 Ag
179 °C
179 °C
Sn63
63 Sn, 37 Pb
183 °C
183 °C
Pb-Free
95.5 Sn, 3.8 Ag, 0.7 Cu
217 °C
217 °C
Hi-Temp
5 Sn, 93.5 Pb, 1.5 Ag
296 °C
301 °C
Sn5
5 Sn, 95 Pb
308 °C
312 °C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1030-1 • 4/6/2011
4
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications – CBR Series
Table 2 – Chip Capacitor Land Pattern Design Recommendations per IPC-7351 (mm)
Case
Size
(in.)
Case
Size
(mm)
0201
Density Level A:
Maximum (Most) Land
Protrusion
Density Level B:
Median (Nominal) Land
Protrusion
Density Level C:
Minimum (Least) Land
Protrusion
C
Y
X
V1
V2
C
Y
X
V1
V2
C
Y
X
V1
V2
0603
0.38
0.56
0.52
1.80
1.00
0.33
0.46
0.42
1.50
0.80
0.28
0.36
0.32
1.20
0.60
0402
1005
0.50
0.72
0.72
2.20
1.20
0.45
0.62
0.62
1.90
1.00
0.40
0.52
0.52
1.60
0.80
0603
1608
0.90
1.15
1.10
4.00
2.10
0.80
0.95
1.00
3.10
1.50
0.60
0.75
0.90
2.40
1.20
0805
2012
1.00
1.35
1.55
4.40
2.60
0.90
1.15
1.45
3.50
2.00
0.75
0.95
1.35
2.80
1.70
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder
processes. KEMET only recommends wave soldering of 0603(1608) and 0805(2012) case sizes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC standard 7351 (IPC-7351).
Storage and Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp, and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40 degrees C, and maximum storage humidity not
exceed 70% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and
atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability, chip stock should be used promptly,
preferably within 1.5 years of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1030-1 • 4/6/2011
5
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications – CBR Series
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
http://capacitoredge.kemet.com
SPICE & FIT Software
http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge
http://www.kemet.com/keask
Product Information
Resource
Location
Products
Technical Resources (Including Soldering
Techniques)
RoHS Statement
Quality Documents
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
Sample Request
Engineering Kit Request
http://www.kemet.com/sample
http://www.kemet.com/kits
Contact
Resource
Location
Website
Contact Us
Investor Relations
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
Call Us
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1030-1 • 4/6/2011
6
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications – CBR Series
KEMET Corporation
World Headquarters
Europe
Asia
2835 KEMET Way
Simpsonville, SC 29681
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Northeast Asia
Paris, France
Tel: 33-1-4646-1009
Shenzhen, China
Tel: 86-755-2518-1306
Sasso Marconi, Italy
Tel: 39-051-939111
Beijing, China
Tel: 86-10-5829-1711
Milan, Italy
Tel: 39-02-57518176
Shanghai, China
Tel: 86-21-6447-0707
Fort Lauderdale, FL
Tel: 954-766-2800
Rome, Italy
Tel: 39-06-23231718
Taipei, Taiwan
Tel: 886-2-27528585
North America
Madrid, Spain
Tel: 34-91-804-4303
Southeast Asia
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Offices
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central Europe
Hong Kong
Tel: 852-2305-1168
Singapore
Tel: 65-6586-1900
Landsberg, Germany
Tel: 49-8191-3350800
Penang, Malaysia
Tel: 60-4-6430200
Dortmund, Germany
Tel: 49-2307-3619672
Bangalore, India
Tel: 91-806-53-76817
Kwidzyn, Poland
Tel: 48-55-279-7025
Central
Schaumburg, IL
Tel: 847-882-3590
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1030-1 • 4/6/2011
7
Similar pages