ELP-75 75W Single Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 90% Optional L-Bracket and cover (ELP-75-x-C, x=3.3,5,12,15,24,36,48) Protections: Short circuit / Overload / Over voltage Cooling by free air convection 1U low profile LED indicator for power on No load power consumption<0.5W 3 years warranty SPECIFICATION ELP-75-3.3 ELP-75-5 ELP-75-12 ELP-75-15 ELP-75-24 ELP-75-36 ELP-75-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 36V 48V RATED CURRENT 15A 15A 6.25A 5A 3.15A 2.1A 1.6A CURRENT RANGE 0 ~ 15A 0 ~ 15A 0 ~ 6.25A 0 ~ 5A 0 ~ 3.15A 0 ~ 2.1A 0 ~ 1.6A RATED POWER 49.5W 75W 75W 75W 75.6W 75.6W 76.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 150mVp-p 240mVp-p 280mVp-p 300mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 2.0% 10.8 ~ 13.2V 2.0% 13.5 ~ 16.5V 2.0% 21.6 ~ 26.4V 1.0% 32.4 ~ 39.6V 1.0% 43.2 ~ 52.8V 1.0% MODEL OUTPUT 3 ~ 3.6V VOLTAGE TOLERANCE Note.3 3.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 1.0% 1.0% 1.0% 1.0% 1.0% 2500ms, 50ms/230VAC SETUP, RISE TIME 20ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE Note.6 90 ~ 264VAC FREQUENCY RANGE 20ms/115VAC at full load 127 ~ 370VDC 47 ~ 63Hz POWER FACTOR (Typ.) Note.5 3.3V: PF>0.91/230VAC INPUT EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.8A/115VAC LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION EMC IMMUNITY OTHERS 5V~48V: PF>0.95/230VAC 82% 89% PF>0.98/115VAC at full load 90% 90% 90% 90% 39.7 ~ 46.8V 53.3 ~ 64.8V 1 A/230VAC COLD START 60A/230VAC <1mA/240VAC 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.7 ~ 4.45V 5.6 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, heavy industry level, criteria A MTBF 345.3Khrs min. DIMENSION PCB:175*60*27mm (L*W*H) with optional CASE:195*68.5*33mm (L*W*H) PCB:0.25Kg; 48pcs/13Kg/0.85CUFT with optional CASE:0.54Kg; 25pcs/14.5Kg/0.59CUFT PACKING NOTE 2500ms, 50ms/115VAC at full load MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. 3.3V PF>0.92/230VAC, others PF>0.95/230VAC. 6. Derating may be needed under low input voltage. Please check the derating curve for more details. File Name:ELP-75-SPEC 2011-05-09 ELP-75 75W Single Output with PFC Function Mechanical Specification series Unit:mm 175 165 5 1 2 3 4 5 6 CN1 1 2 3 FS1 T2.5A/250V CN2 LED1 4- 3.8 3max. 27 SVR1 5 10.6 Pin No. 1 2 3 Assignment AC/L No Pin AC/N 16 AC Input Connector (CN1) : JST B3P-VH or equivalent Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent 2- 163.8 4 2-M 9 25 25 4-M 4 3 10.6 3 Pin No. 1,2,3 4,5,6 Assignment -V +V 33 DC Output Connector (CN2) : JST B6P-VH or equivalent 185 195 Terminal JST SVH-21T-P1.1 or equivalent Mating Housing JST VHR or equivalent 4 7 25 5 Optional L-Bracket: No. 996A-D 25 9 6 8 .5 Block Diagram fosc : 100KHz EMI FILTER & RECTIFIER I/P PFC CIRCUIT RECTIFIERS & FILTER POWER SWITCHING +V -V DETECTION CIRCUIT FG O.L.P. CONTROL O.V.P. Output Derating Output Derating VS Input Voltage Ta=25 230VAC 100 Others 100 90 80 115VAC 80 60 70 3.3V,5V LOAD (%) LOAD (%) 60 50 5 Optional cover: No. 996A-T 40 20 -30 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:ELP-75-SPEC 2011-05-09