ES2A thru ES2D Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ideal for automated placement • Ultrafast recovery times for high efficiency • Low forward voltage, low power losses • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC DO-214AA (SMB) TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 50 V to 200 V IFSM 50 A trr 20 ns VF 0.90 V TJ max. 150 °C MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code ES2A ES2B ES2C ES2D UNIT EA EB EC ED Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 35 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current at TL = 110 °C IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) Maximum DC reverse current at rated DC blocking voltage Document Number: 88587 Revision: 27-Aug-07 2.0 A TA = 25 °C TA = 100 °C SYMBOL ES2A ES2B ES2C ES2D UNIT VF 0.90 V IR 10 350 µA For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 ES2A thru ES2D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Max. reverse recovery time IF = 0.5 A, IR = 1.0 A, lrr = 0.25 A Maximum reverse recovery time IF = 2.0 A, VR = 30 V, dI/dt = 50 A/µs, Ir = 10 % IRM Maximum stored charge IF = 2.0 A, VR = 30 V, dI/dt = 50 A/µs, Ir = 10 % IRM Typical junction capacitance 4.0 V, 1 MHz SYMBOL ES2A ES2B ES2C ES2D UNIT trr 20 ns TJ = 25 °C TJ = 100 °C trr 30 50 ns TJ = 25 °C TJ = 100 °C Qrr 10 25 nC CJ 18 pF Note: (1) Pulse test: 300 ms pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL ES2A ES2B RθJA RθJL Typical thermal resistance (1) ES2C ES2D 75 20 UNIT °C/W Note: (1) Units mounted on P.C.B. 5.0 x 5.0 mm (0.013 mm thick) land areas ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE ES2D-E3/52T 0.096 52T 750 7" diameter plastic tape and reel ES2D-E3/5BT 0.096 5BT 3200 13" diameter plastic tape and reel ES2DHE3/52T (1) 0.096 52T 750 7" diameter plastic tape and reel ES2DHE3/5BT (1) 0.096 5BT 3200 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 60 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 3.0 2.0 1.0 Resistive or Inductive Load P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0 8.3 ms Single Half Sine-Wave at TL = 110 °C 50 40 30 20 10 0 80 90 100 110 120 130 140 150 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88587 Revision: 27-Aug-07 ES2A thru ES2D Vishay General Semiconductor 60 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 150 °C 10 TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 50 40 30 20 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Leakage Current (µA) 10 000 TJ = 150 °C 1000 TJ = 125 °C TJ = 100 °C 100 10 TJ = 25 °C 1 0.1 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Mounting Pad Layout Cathode Band 0.085 MAX. (2.159 MAX.) 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.180 (4.57) 0.160 (4.06) 0.086 MIN. (2.18 MIN.) 0.060 MIN. (1.52 MIN.) 0.012 (0.305) 0.006 (0.152) 0.220 REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Document Number: 88587 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1