Power Inductors - Shielded CTEP125U Series From 0.3 µH to 5.6 µH SPECIFICATIONS Parts are available in ±20% only. * This indicates the current when the inductance decreases to 75% over it’s nominal value or DC current when the temperature rising ∆T=40°C lower, whichever is lower. CTEP125UF Please specify “F” for RoHS compliant Inductance (µH ±20%) L Test Freq. (kHz) CTEP125U_-0R3M CTEP125U_-0R6M CTEP125U_-0R8M 0.3 0.6 0.8 100 100 100 2.5 2.5 2.5 35.0 30.0 27.2 CTEP125U_-1R4M CTEP125U_-2R2M CTEP125U_-3R2M CTEP125U_-4R3M CTEP125U_-5R6M 1.4 2.2 3.2 4.3 5.6 100 100 100 100 100 3.4 5.4 8.0 11.4 13.5 20.8 14.8 12.8 11.0 9.5 Part Number Not shown at actual size. RoHS Compliant Available ctparts.com DCR Max. Ω) (mΩ *Current (A) PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Max. 12.9 12.9 5.8 2.6±.2 7.0±.2 4.0±.2 .51 .51 .23 .10±.01 .28±.01 .16±.01 CHARACTERISTICS Description: SMD shielded power inductor Applications: Power supplies for VTR, OA equipment, LCD televisions, PC notebooks, portable communication equipment, DC/DC converters, etc. Operating Temperature: -30°C to +100°C Inductance Tolerance: ±20% Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant available. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. PAD LAYOUT CENTRAL Technologies 01.03.06 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice D E F G H 4.2±.2 2.5±.2 0.17±0.1 .10±.01