10Base-T Interface Module ELECTRONICS INC. EPE6192G & EPE6192G-RC • General purpose 10Base-T Filter Module • Operating Temperature Range : 0°C to +70°C • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) (Ref.) Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz @ 50 MHz @ 100 MHz @ 200 MHz 1-10 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -15/-15 -7/-5 -18/-11 -30/-18 -35/-26 -45/-45 -30/-30 -20/-20 -35/-35 • Attenuation (dB Min.) Common Mode Rejection (dB Min.) Isolation : Meets or exceeds 802.3 IEEE Requirements • Crosstalk (dB Min.) Characteristic Filter Impedance : 100 Ω • Package Schematic Transmit Channel .920 (23.36) Pin 1 I.D. PCA EPE6192G(-RC) Date Code .400 (10.16) 8 LPF 7 6 3 Pad Layout .540 (13.72) 1:1 5 .700 (17.78) .040 (1.02) .010/.015 (.254/.381) .225 (5.71) Cable Side 1 .090 (2.29) .100 (2.54) .110 (2.79) Chip Side Receive Channel Chip Side Cable Side 16 9 .008/.012 (.203/.305) 0°-8° LPF .030 (.762) .016/.022 (.406/.559) 10 14 11 1:1 .500 (12.70) .100 (2.54) 12 Notes : EPE6192G 1. Assembly Process (Solder Composition) SnPb EPE6192G-RC Pb-Free + (RoHS exemption 7a) 2. Peak Solder Rating 225°C (per IPC/JEDEC J-STD-020C) 3. Moisture Sensitive Levels (MSL) MSL = 3 (168 Hours, ≤30°C/60%RH) (per IPC/JEDEC J-STD-020C) 4. Weight 5. Packaging Information (*Add “TR” to end of part number when placing order) (Tube) (Tape & Reel) 260°C MSL = 4 (72 Hours, ≤30°C/60%RH) 2.5 grams 2.5 grams 22 pieces/tube 400 pieces/13” reel 22 pieces/tube 400 pieces/13” reel (*EPE6192G-TR) (*EPE6192G-RCTR) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6192G & -RC Rev. Orig.3 1/9/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com