Home Phone Networking Magnetic Module ELECTRONICS INC. EPB5119S • Designed to work with Broadcom’s BCM4210 • • Integrated with 10/100 Base-T Magnetics • • Robust Construction allows for IR Processes • • 1500 Vrms Isolation • • Temperature Range : -40°C to +85°C • Electrical Parameters @ 25° C Insertion Loss Return Loss (dB) (dB Min.) Cut-Off Freq. (MHz Typ.) Lower Upper Band Band HPNA 11.5 3.5 4.25 MHz 9.75 MHz 6 MHz 9 MHz @ 1.1 MHz @ 22 MHz @ 54 MHz @ 1 MHz 1.0 - 2.2 -12 -60 -35 -50 -50 1-80 MHz Transmit -1.0 Receive -1.0 @ 100 MHz -1.5 • CMDR (dB Min.) @ 100 MHz -50 1-30 MHz -18 @ 60 MHz -12 Turns Ratio 200 KHz 22 MHz Pins 29-28:1-3 Pins 29-28:3-4 -40 1:.667 1:.2 CMRR (dB Min.) Return Loss (dB Min.) Insertion Loss (dB Max.) 10/100 Base-T CMRR (dB Min.) Attenuation (dB Min.) @ 80 MHz -10 1-30 MHz -45 -1.5 -18 -12 -10 Cable Side Impedance : 100 Ω • Crosstalk : -35 dB Min. • @ 100 MHz -35 @ 200 MHz -35 -10 -45 -10 Schematic 1 HPNA Filter Input Impedance 29 (Phone Line Tip) Transmit BPF 2 28 (Phone Line Ring) 3 Receive HPNA Filter 40 4 Transmit (10/100 Base-T) 25 16 15 17 0 < f < = 0.285 0.285 < f < = 2.85 2.85 < f < = 28.5 28.5 < f < = 95 95 < f < = 190 190 < f < = 285 285 < f < = 380 380 < f < = 475 475 < f < = 570 570 < f < = 665 665 < f < = 760 760 < f < = 855 855 < f < = 950 950 < f < = 1000 Receive (10/100 Base-T) 22 19 26 18 24 20 1: 1 23 21 1: 1 Package A N J With 44.2 Ω load across pins 1 and 2, please refer to the table below. The magnitude of the input impedance shall be > 10 Ω from 0-30 MHz and shall conform to the following lower-bound mask: Frequency Minimum Frequency Minimum Range Impedance Range Impedance (KHz) Ω (KHz) Ω 1M 100 K 10 K 4.0 K 2.0 K 1.4 K 1.0 K 850 700 600 525 450 400 350 1000 < f < = 1400 1400 < f < = 2300 2300 < f < = 2850 2850 < f < = 3085 3085 < f < = 3725 3725 < f < = 3935 3935 < f < = 4000 10000 < f < =10450 10450 < f < =10925 10925 < f < = 13125 13125 < f < = 14175 14175 < f < = 16800 16800 < f < = 21000 21000 < f < = 30000 175 100 50 25 10 25 50 40 25 10 25 50 100 50 Dimensions Pin 1 I.D. 40 PCA EPB5119S Date Code B 21 P Solder Pad Layout Q 1 20 D M E C K L H PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 F I G Dim. A B C D E F G H I J K L M N P Q (Inches) Min. Max. Nom. (Millimeters) Min. Max. Nom. 1.110 .470 .250 --.010 --.590 .016 .008 --0° .025 --------- 28.19 11.94 6.35 --.254 --14.99 .406 .203 --0° .635 --------- 1.130 .490 .270 --.015 --.610 .022 .012 --8° .045 --------- 1.120 .480 .260 .950 .012 .050 .600 .019 .010 .085 --.035 .030 .050 .090 .670 CSB5119S Rev. - 11/7/00 Product performance is limited to specified parameters. Data is subject to change without prior notice. 28.70 12.45 6.86 --.381 --15.49 .559 .305 --8° 1.14 --------- 28.45 12.19 6.60 24.13 .305 1.27 15.24 .483 .254 2.16 --.889 .762 1.27 2.29 17.02 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com