BCP882J 3A , 40V P Plastic-Encapsulate Transistor Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES Small Flat Package. High DC Current Gain Low VCE(sat) SOT-89 4 2. Collector 1 CLASSIFICATION OF hFE 2 E BCP882J-O BCP882J-Y BCP882J-GR Range 100~200 160~320 200~400 C B D F G H K PACKAGE INFORMATION MPQ SOT-89 3. Emitter 3 A Rank Package 1. Base J Leader Size 1K Collector 7 inch Millimeter Min. Max. 4.40 4.60 3.94 4.25 1.40 1.60 2.30 2.60 1.50 1.70 0.89 1.20 REF. 2 A B C D E F 1 Base L REF. G H J K L Millimeter Min. Max. 0.40 0.58 1.50 TYP 3.00 TYP 0.32 0.52 0.35 0.44 3 Emitter ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Parameter Symbol Rating Unit Collector to Base Voltage VCBO 40 V Collector to Emitter Voltage VCEO 30 V Emitter to Base Voltage VEBO 6 V Continuous Collector Current IC 3 A Collector Power Dissipation PC 500 mW RθJA 250 °C / W TJ, TSTG 150, -55~150 °C Thermal Resistance from Junction to Ambient Junction and Storage Temperature ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise specified) Parameter Symbol Min Typ Max Unit Test condition Collector to Base Breakdown Voltage V(BR)CBO 40 - - V IC=100µA, IE=0 Collector to Emitter Breakdown Voltage V(BR)CEO 30 - - V IC=10mA, IB=0 Emitter to Base Breakdown Voltage V(BR)EBO 6 - - V IE=100µA, IC=0 Collector Cut-Off Current ICBO - - 1 µA VCB=40V, IE=0 Collector Cut-Off current ICEO - - 10 µA VCE=30V, IB=0 Emitter Cut-Off Current IEBO - - 1 µA VEB=6V, IC=0 100 - 400 DC Current Gain hFE VCE=2V, IC=1A 32 VCE=2V, IC=100mA Collector to Emitter Saturation Voltage VCE(sat) - - 0.5 V IC=2A, IB=0.2A Base to Emitter Saturation Voltage VBE(sat) - - 1.5 V IC=2A, IB=0.2A fT - 50 - Transition Frequency http://www.SeCoSGmbH.com/ 14-Jul-2016 Rev. A MHz VCE=5V, IC=0.1A, f=10MHz Any changes of specification will not be informed individually. Page 1 of 2 BCP882J Elektronische Bauelemente 3A , 40V P Plastic-Encapsulate Transistor CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 14-Jul-2016 Rev. A Any changes of specification will not be informed individually. Page 2 of 2