Click on Series name for product info on aimtec.com Series AM1DE-Z 1 Watt | DC-DC Converter FEATURES: Operating Temperature -40°C to +105°C High efficiency up to 81% Low Profile Plastic Package 7 pin SIP package Low Ripple and Noise Continuous Short Circuit Protection Pin Compatible with Multiple Manufacturers Input / Output Isolation 1500, and 3000 VDC Models Single output Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) AM1DE-0505SZ AM1DE-0512SZ AM1DE-0515SZ AM1DE-1205SZ AM1DE-1212SZ AM1DE-1215SZ AM1DE-2405SZ AM1DE-2412SZ AM1DE-2415SZ 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 10.8 - 13.2 10.8 - 13.2 10.8 - 13.2 21.6 – 26.4 21.6 – 26.4 21.6 – 26.4 5 12 15 5 12 15 5 12 15 200 83 67 200 83 67 200 83 67 1500 1500 1500 1500 1500 1500 1500 1500 1500 253 253 253 106 106 104 53 53 53 AM1DE-0505SH30Z AM1DE-0512SH30Z AM1DE-0515SH30Z AM1DE-1205SH30Z AM1DE-1212SH30Z AM1DE-1215SH30Z AM1DE-2405SH30Z AM1DE-2412SH30Z AM1DE-2415SH30Z 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 10.8 - 13.2 10.8 - 13.2 10.8 - 13.2 21.6 – 26.4 21.6 – 26.4 21.6 – 26.4 5 12 15 5 12 15 5 12 15 200 83 67 200 83 67 200 83 67 3000 3000 3000 3000 3000 3000 3000 3000 3000 253 253 253 106 106 104 53 53 53 Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 10.8 - 13.2 10.8 - 13.2 10.8 - 13.2 21.6 – 26.4 21.6 – 26.4 21.6 – 26.4 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±100 ±42 ±33 ±100 ±42 ±33 ±100 ±42 ±33 1500 1500 1500 1500 1500 1500 1500 1500 1500 Model Input Current Full Load | No Load (mA) Max Capacitive Load (uF) Efficiency % 30 30 30 15 15 15 7 7 7 220 100 100 220 100 100 220 100 100 80 81 81 80 80 81 80 80 80 30 30 30 15 15 15 7 7 7 220 100 100 220 100 100 220 100 100 80 81 81 80 80 81 80 80 80 Max Capacitive Load (uF) Efficiency (%) ±100 ±47 ±47 ±100 ±47 ±47 ±100 ±47 ±47 80 81 81 80 80 81 80 80 80 Models Dual output Model AM1DE-0505DZ AM1DE-0512DZ AM1DE-0515DZ AM1DE-1205DZ AM1DE-1212DZ AM1DE-1215DZ AM1DE-2405DZ AM1DE-2412DZ AM1DE-2415DZ Input Current Full Load | No Load (mA) 253 253 253 106 106 104 53 53 53 30 30 30 15 15 15 7 7 7 AM1DE-0505DH30Z 4.5 - 5.5 ±5 ±100 3000 253 30 ±100 80 AM1DE-0512DH30Z 4.5 - 5.5 ±12 ±42 3000 253 30 ±47 81 AM1DE-0515DH30Z 4.5 - 5.5 ±15 ±33 3000 253 30 ±47 81 AM1DE-1205DH30Z 10.8 - 13.2 ±5 ±100 3000 106 15 ±100 80 AM1DE-1212DH30Z 10.8 - 13.2 ±12 ±42 3000 106 15 ±47 80 AM1DE-1215DH30Z 10.8 - 13.2 ±15 ±33 3000 104 15 ±47 81 AM1DE-2405DH30Z 21.6 – 26.4 ±5 ±100 3000 53 7 ±100 80 AM1DE-2412DH30Z 21.6 – 26.4 ±12 ±42 3000 53 7 ±47 80 AM1DE-2415DH30Z 21.6 – 26.4 ±15 ±33 3000 53 7 ±47 80 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R11.A Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DE-Z 1 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical 5 12 24 4.5 - 5.5 10.8 - 13.2 21.6 - 26.4 Capacitor 15 0-9 0-18 0-30 Voltage Range Filter Input Reflected Ripple Current Absolute Maximum Rating (1 Sec Max) With reference circuit 5 Vin 12 Vin 24 Vin Maximum Units VDC mA p-p VDC Isolation Specifications Parameters Conditions Tested I/O voltage Resistance Capacitance Typical 60 sec Rated Units 1500 or 3000 VDC MOhm pF > 1000 50 Output Specifications Parameters Voltage Accuracy Short Circuit Protection Line Voltage Regulation Load Voltage Regulation Temperature Coefficient Ripple & Noise* Conditions For 1.0% of Vin Load 10~100% At 20MHz Bandwidth Typical Maximum Units See tolerance chart Continuous with Auto Recovery ±1.2 ±10 ±0.02 60 % % %/oC mV p-p * measured with 0.1 μF ceramic capacitor General Specifications Parameters Switching Frequency Operating Temperature Storage Temperature Cooling Humidity Case Material Weight Dimensions (L x W x H) MTBF Conditions Typical Maximum 50 Derating above 95°C Units KHz oC oC -40 to +105 -55 to +125 Free air convection 95 Non-conductive black plastic UL 94 V-0 2.4 0.76 x 0.24 x 0.39 inch 19.50 x 6.00 x 9.90 mm >3 600 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) % g Safety Specifications Parameters Agency Approval Standards www.aimtec.com F 051e R11.A CE EN 55022: 2010+AC: 2011, Class B (external reference circuit below) EN 55024: 2010 IEC 61000-4-2: 2008 IEC 61000-4-3: 2010 IEC 61000-4-4: 2012 IEC 61000-4-5: 2014 IEC 61000-4-6: 2013 IEC 61000-4-8: 2009 Designed to meet IEC60950-1 Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DE-Z 1 Watt | DC-DC Converter Pin Out Specifications Pin Single 1000 VDC Dual 1000 VDC Single 3000 VDC Dual 3000 VDC 1 2 4 5 6 7 + V Input - V Input - V Output No pin + V Output No pin + V Input - V Input - V Output Common + V Output No pin + V Input - V Input No pin - V Output No pin + V Output + V Input - V Input No pin - V Output Common + V Output Dimensions www.aimtec.com F 051e R11.A Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DE-Z 1 Watt | DC-DC Converter Load Accuracy Tolerance Graph Input Reflected Ripple Test Circuit Lin 12µH Vin+ Test Point Vin+ + Cin 47µF ESR< 1Ω at 100Khz Vin- Conducted Emissions Circuit, class B Vo+ Aimtec DC-DC Converter - Vo- C1 4.7µF/ 50V L1 6.8µH Vin- + Vo+ Aimtec DC-DC Converter - Vo- * Tested at full load, and nominal input Surge Immunity test circuit +Vin +Vout + C - www.aimtec.com F 051e R11.A D DC-DC Converter -Vin -Vout AM1DE-05xx AM1DE-12xx AM1DE-24xx Load Tel: +1 514 620 2722 4 of 5 C 1000uF/35V 1000uF/35V 330uF/50V D 9V 18V 28V Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DE-Z 1 Watt | DC-DC Converter Derating Free Air Convection 95 ºC 105 ºC 100 Output Power % 90 80 60 Safe Operating Area 40 30 20 0 -40 -25 0 20 40 60 80 95 105 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.A Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only