ACPL-8x4 Multi-Channel Full-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description Features The ACPL-824 is an AC-input dual channel full-pitch phototransistor optocoupler which contains four light emitting diode optically coupled to two separate phototransistor. It is packaged in a 8-pin DIP package. • Current transfer ratio (CTR: min. 20% at IF = ±1mA, VCE = 5V) Likewise, the ACPL-844 is an AC-input quad channel fullpitch phototransistor optocoupler which contains eight light emitting diode optically coupled to four separate phototransistor. It is packaged in a 16-pin DIP package For both types, it is also available in wide-lead spacing option and lead bend SMD option with input-output isolation voltage at 5000 Vrms. Response time, tr, is typically 4 µs and CTR is 20% to 300%. 7 6 • Response time (tr: typ. 4µs at VCE = 2V, IC = 2mA, RL= 100W) • Compact dual-in-line package • Safety and regulatory approvals - CSA - UL 1577 - IEC/EN/DIN EN 60747-5-2 ACPL-824 pin layout 8 • High input-output isolation voltage (VISO = 5,000VRMS) • Options available: 5 – Leads with 0.4” (10.16 mm) spacing (W00) – Lead bend for surface mounting (300) – Tape and reel for SMD (500) – (ACPL-824 only) 1 • • • • 2 3 – IEC/EN/DIN EN 60747-5-2 approved (060) 4 Pin 1, 3 Pin 2, 4 Pin 5, 7 Pin 6, 8 Anode or Cathode Cathode or Anode Emitter Collector • • • • 3 4 5 • I/O Interface for Programmable controllers, computers • System appliances, measuring instruments 16 15 14 13 12 11 10 9 2 Applications • Sequence controllers ACPL-844 pin layout 1 – Lead-Free (000E) 6 Pin 1, 3, 5, 7 Pin 2, 4, 6, 8 Pin 9,11,13,15 Pin 10,12,14,16 7 8 Anode or Cathode Cathode or Anode Emitter Collector • Signal transmission between circuits of different potentials and impedances. Ordering Information ACPL-8x4 is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA 88324. RoHS Compliant Option Part number ACPL-824 ACPL-844 Rank ‘0’ 20%<CTR<300% Package No. of Channels -000E 300mil DIP-8 Dual -300E 300mil DIP-8 x X -500E 300mil DIP-8 X X -060E 300mil DIP-8 -360E 300mil DIP-8 x x -560E 300mil DIP-8 x X -W00E 400mil DIP-8 -W60E 400mil DIP-8 -000E 300mil DIP-16 -300E 300mil DIP-16 -060E 300mil DIP-16 -360E 300mil DIP-16 -W00E 400mil DIP-16 -W60E 400mil DIP-16 Surface Mount Gull Wing Tape & Reel IEC/EN/DIN EN 60747-5-2 Quantity 50 pcs per tube 50 pcs per tube X X 1000 pcs per reel X 50 pcs per tube X 50 pcs per tube X 1000 pcs per reel 50 pcs per tube X Quad 50 pcs per tube 25 pcs per tube x x X X 25 pcs per tube X 25 pcs per tube X 25 pcs per tube 25 pcs per tube X 25 pcs per tube To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-824-360E to order product of 300mil DIP-8 Dual Channel AC Gull Wing Surface Mount package in Tube packaging with 20%<CTR<300%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant. Example 2: ACPL-844-W00E to order product of 400mil DIP-16 Quad Channel AC package in Tube packaging with 20%<CTR<300% and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings ACPL-824 Package Outline DATE CODE LEAD FREE PIN ONE DOT A 824 YYWW 6.50 ±0.50 0.256 ±0.020 7.62 ±0.30 0.30 ±0.01 9.68 ±0.50 0.381 ±0.020 3.50 ±0.50 0.138 ±0.020 2.80 ±0.50 0.11 ±0.02 3.30 ±0.50 0.130 ±0.020 2.54 ±0.25 0.10 ±0.01 0.50 ±0.10 0.02 ±0.00 0.50 0.02 TYP 0.26 0.01 [7.62 - 9.98] 0.3 - 0.39 DIMENSIONS IN [MILLIMETERS] AND INCHES ACPL-824 Package Outline – Option 060 DATE CODE LEAD FREE PIN ONE DOT A 824 V YYWW 6.50 ±0.50 0.256 ±0.020 7.62 ±0.30 0.30 ±0.01 9.68 ±0.50 0.381 ±0.020 3.50 ±0.50 0.138 ±0.020 2.80 ±0.50 0.11 ±0.02 3.30 ±0.50 0.130 ±0.020 2.54 ±0.25 0.10 ±0.01 0.50 ±0.10 0.02 ±0.00 DIMENSIONS IN [MILLIMETERS] AND INCHES 0.50 0.02 TYP 0.26 0.01 [7.62 - 9.98] 0.3 - 0.39 ACPL-824 Package Outline – Option W00 DATE CODE LEAD FREE PIN ONE DOT A 824 YYWW 6.50 0.256 7.62 ±0.30 0.30 ±0.01 9.68 ±0.50 0.381 ±0.020 3.50 ±0.50 0.138 ±0.020 2.80 ±0.50 0.11 ±0.02 6.90 ±0.50 0.272 ±0.020 2.30 ±0.50 0.09 ±0.02 0.26 0.01 10.16 ±0.50 0.40 ±0.02 0.50 ±0.10 0.02 ±0.00 2.54 ±0.25 0.10 ±0.01 DIMENSIONS IN [MILLIMETERS] AND INCHES ACPL-824 Package Outline – Option 300 DATE CODE LEAD FREE PIN ONE DOT A 824 YYWW 6.50 ±0.50 0.256 ±0.020 7.62 ±0.30 0.30 ±0.01 9.68 ±0.50 0.381 ±0.020 3.50 ±12.70 0.138 ±0.500 1.20 ±0.10 0.047 ±0.004 2.54 ±0.25 0.10 ±0.01 0.35 ±0.25 0.014 ±0.010 0.26 0.01 1 ±0.25 0.039 ±0.010 10.16 ±0.50 0.40 ±0.02 DIMENSIONS IN [MILLIMETERS] AND INCHES ACPL-844 Package Outline DATE CODE LEAD FREE PIN ONE DOT A 844 YYWW 6.50 ±0.50 0.256 ±0.020 7.62 ±0.30 0.30 ±0.01 19.84 ±0.50 0.781 ±0.020 3.50 ±0.50 0.138 ±0.020 2.80 ±0.50 0.11 ±0.02 3.30 ±0.50 0.130 ±0.020 2.54 ±0.25 0.10 ±0.01 0.50 ±0.10 0.02 ±0.00 DIMENSIONS IN [MILLIMETERS] AND INCHES 0.50 0.02 TYP 0.26 0.01 [7.62 - 9.98] 0.3 - 0.39 ACPL-844 Package Outline - Option 060 LEAD FREE DATE CODE A 844 V YYWW PIN ONE DOT 6.50 ±0.50 0.256 ±0.020 7.62 ±0.30 0.30 ±0.01 19.84 ±0.50 0.781 ±0.020 3.50 ±0.50 0.138 ±0.020 2.80 ±0.50 0.11 ±0.02 3.30 ±0.50 0.130 ±0.020 2.54 ±0.25 0.10 ±0.01 0.50 ±0.10 0.02 ±0.00 0.50 0.02 TYP 0.26 0.01 [7.62 - 9.98] 0.3 - 0.39 DIMENSIONS IN [MILLIMETERS] AND INCHES ACPL-844 Package Outline - Option W00 DATE CODE LEAD FREE PIN ONE DOT A 844 YYWW 6.50 ±0.50 0.256 ±0.020 7.62 ±0.30 0.30 ±0.01 19.84 ±0.50 0.781 ±0.020 3.50 ±0.50 0.138 ±0.020 6.90 ±0.50 0.272 ±0.020 2.80 ±0.50 0.11 ±0.02 10.16 ±0.50 0.40 ±0.02 0.50 ±0.10 0.02 ±0.00 2.54 ±0.25 0.10 ±0.01 DIMENSIONS IN [MILLIMETERS] AND INCHES ACPL-844 Package Outline - Option 300 LEAD FREE PIN ONE DOT DATE CODE A 844 YYWW 6.50 ±0.50 0.256 ±0.020 7.62 ±0.30 0.30 ±0.01 19.84 ±0.50 0.781 ±0.020 3.50 ±0.50 0.138 ±0.020 1.20 ±0.10 0.05 ±0.00 2.54 ±0.25 0.10 ±0.01 DIMENSIONS IN [MILLIMETERS] AND INCHES 0.35 ±0.25 0.01 ±0.01 1 ±0.25 0.039 ±0.010 10.16 ±0.30 0.40 ±0.01 0.26 0.01 Solder Reflow Temperature Profile 30 seconds 1. One-time soldering reflow is recommended within the condition of temperature and time profile shown at right. 2. When using another soldering method such as infrared ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of (1) above. Note: Non-halide flux should be used 250°C 260 °C (Peak Temperature) Temperature (°C) 217°C 200°C 150°C 60 sec 25°C 60 ~ 150 sec 90 sec 60 sec Time (sec) Absolute Maximum Ratings Parameter Symbol Min. Max. Units Storage Temperature TS -55 125 °C Operating Temperature TA -30 100 °C Average Forward Current IF(AVG) - ±50 mA Input Power Dissipation PI - 70 mW Collector Current IC - 50 mA Collector-Emitter Voltage VCEO - 70 V Emitter-Collector Voltage VECO - 6 V Isolation Voltage (AC for 1min, R.H. 40~60%) VISO - 5000 VRMS Collector Power Dissipation PC - 150 mW Total Power Dissipation PTOT - 200 mW Lead Solder Temperature 260°C for 10 sec., 1.6 mm below seating plane Note Electrical Specifications (DC) Over recommended operating conditions unless otherwise specified. Parameter Symbol Min. Typ. Max. Units Test Conditions Note Forward Voltage VF - 1.2 1.4 V IF = ±20mA Terminal Capacitance Ct 50 250 pF V = 0, f = 1KHz Collector Dark Current ICEO - 100 nA VCE = 20V, IF = 0 mA Collector-Emitter Breakdown Voltage BVCEO 70 - - V IC = 0.1 mA, IF = 0 mA Emitter-Collector Breakdown Voltage BVECO 6 - - V IE = 10 mA, IF = 0 mA Collector Current IC 0.2 - 3 mA IF = ±1mA, VCE = 5V Current Transfer Ratio CTR 20 - 300 % Collector-Emitter Saturation Voltage VCE(sat) - 0.1 0.2 Isolation Resistance RISO 1x1011 - V W IF = ± 20 mA, IC = 1mA 5x1010 Floating Capacitance CF - 0.6 1 pF V = 0, f = 1MHz Cut-off Frequency (-3dB) FC 15 80 - KHz VCE = 5V, IC = 2 mA, RL = 100W See fig 13 Response Time (Rise) tr - 4 18 ms VCE = 2V, IC = 2 mA, RL = 100W See fig 12 Response Time (Fall) tf - 3 18 ms CTR=(IC/IF )* 100% DC500V, R.H. 40~60% 200 Collector power dissipation Pc (mW) 60 Forward current I (mA) 50 40 30 20 10 0 -30 0 25 50 75 100 125 150 100 50 0 -30 0 5 4 2 1 200 o 25 C 0C -25 C o o 100 o 50 20 10 5 2 0 2.5 5.0 7.5 1 10.0 12.5 15.0 0 0.5 140 15 20 25 30 Figure 4. Forward Current vs. Forward Voltage 50 V =5V Ta=25 C o o 100 80 60 40 20 Ta=25 C I F=30mA Collector current Ic (mA) 120 10 Forward voltage VF (V) Figure 3. Collector-emitter Saturation Voltage vs. Forward Current Current transfer ratio CTR (%) 125 o Ta=75 C 50 C Forward current IF (mA) 40 20mA 30 Pc(MAX.) 10mA 20 5mA 10 1mA 0 0.1 0.2 0.5 1 2 5 10 20 50 100 Forward current I F (mA) Figure 5. Current Transfer Ratio vs. Forward Current 100 500 O Ta=25 C 3 0 75 Figure 2. Collector Power Dissipation vs. Ambient Temperature Forward current I F (mA) Collector-emitter saturation voltage V (sat) (V) Ic=0.5mA 1mA 3mA 5mA 7mA 50 Ambient temperature Ta ( C) Figure 1. Forward Current vs. Ambient Temperature. 6 25 o o Ambient temperature Ta ( C) 0 0 1 2 3 4 5 6 7 8 9 10 Collector-emitter voltage V (V) Figure 6. Collector Current vs. Collector-emitter Voltage. 0.10 IF =1mA VCE =5V Collector-emitter saturation voltage V (sat) (V) Relative current transfer ratio (%) 150 100 50 0 -30 0 25 50 75 0.08 0.06 0.04 0.02 0 -30 100 o 10 -8 10 -9 10 -10 10 -11 10 -12 100 50 V CE=2V Ic=2mA Ta=25 C o 20 60 80 tf 5 td 2 ts 1 0.5 0.2 -30 0 20 40 60 80 0.1 100 Ambient Temperature Ta ( C) V =2V Ic=2mA o Ta=25 C 0 0.1 0.2 0.5 1 2 5 10 Load resistance R L(k ) Figure 9. Collector Dark Current vs. Ambient Temperature Figure 10. Response Time vs. Load Resistance Vcc Input RD RL Input Output Output 10% 90% td R =10k L -10 100 1k ts tr tf Figure 12. Test Circuit for Response Time Vcc -20 RD 0.2 0.5 1 2 5 10 100 RL 1000 Frequency f (kHz) Figure 11. Frequency Response Figure 13. Test Circuit for Frequency Response 100 tr 10 o Voltage gain Av (dB) 40 Figure 8. Collector-emitter Saturation Voltage vs. Ambient Temperature Response time ( s) (A) Collector Dark Current I 10 -7 20 Ambient temperature Ta ( C) Figure 7. Relative Current Transfer Ratio vs. Ambient Temperature -6 0 o Ambient temperature Ta ( C) 10 IF=20mA Ic=1mA Output For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited. in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. AV01-0475EN - May 22, 2007