Data Sheet: F-LBAND-Tx/Rx The L-Band Transmitter/Receiver pair are used for transporting L-Band RF signals from the antenna to the satellite receiver. L-band RF signals have a very limited range over coaxial cable, typically no more than a few hundred feet. By transporting the L-Band RF signal over optical fiber this range can be extended to over 75 miles. Fiber optic cables are much smaller and easier to work with than traditional copper coax. Additionally our units provides optional 13/18V LNB power as well as Automatic Gain Control (AGC) to manage RF input Fiber optic transport of satellite signals is useful in many applications, such as transportation of signals from a remote satellite farm to a broadcaster's headend, uplink and downlink applications, and DBS services. We Offer CWDM multiplexing solutions for transportation of up to 8 distinct L-Band signals over a single fiber, as well as multicasting solutions over several different fibers via optical coupling. Custom solutions are availible, contact us today for help with your specific L-Band needs. Typical L-BAND-Rx/Tx Application Technical Specifications Optical Wavelength Output Power Range RF Frequency Range RF Input Level LNB Power RF Return Loss Input Impedance CNR IMD 1310-1550 nm FP/DFB 0dbm – 4dbm 950 – 2600 MHz 55 – 78dBµV 13 or 18 VDC 350 mA 13 dB 75 Ohm 40 dB 40 dB Power Consumption Power Supply RF Connector Optical Connector Dimensions (H x W x D) Weight 3.5 W 18V DC F Female SC/APC or by request 118mmx210mmx40mm 0.25 Kg Data Sheet: F-LBAND-Tx/Rx